journal article·1991-07

Influence of SiC particle distribution and prestraining on fatigue crack growth rates in aluminium AA 6061–SiC composite material

M. Levin, B. Karlsson

Publisher page

Abstract

The fatigue crack growth properties of an aluminium AA 6061 alloy containing 15 vol.-% particulate SiC and of the corresponding matrix alloy with the same grain size were investigated. The composite was tested in the undeformed condition and after undergoing a plastic prestrain of 0·33% which changes the residual microstress state of the matrix from hydrostatic tension to longitudinal compression. The composite showed superior resistance to crack growth compared with the matrix material irrespective of whether nominal or effective values of stress intensity range ∆K were considered. A 50% increase in the nominal threshold value of ∆K was observed for the undeformed composites. Prestraining did not affect the intrinsic fatigue crack growth properties but resulted in a twofold increase of crack closure stress intensity. Quantitative fractography showed that SiC particles deflect the propagating crack, thus enhancing roughness induced crack closure. Local relief of ∆K by crack deflection and diminished crack tip opening are the main causes of the improved intrinsic fatigue crack growth properties of the composite.MST/1356
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. 10.1016/0013-7944(86)90246-810.1016/0013-7944(86)90246-8 ↗
2. 10.1016/0025-5416(88)90576-910.1016/0025-5416(88)90576-9 ↗
3. 10.1016/0013-7944(89)90111-210.1016/0013-7944(89)90111-2 ↗
4. C. P. YOU and J. E. ALLISON: in Proc. 7th Int. Fract. Conf. on ‘Advances in fracture research’ (ed. K. Salama et al.), 3005-3012; 1989, Oxford, Pergamon Press.
5. 10.1016/0025-5416(88)90573-310.1016/0025-5416(88)90573-3 ↗
6. 10.1016/0001-6160(89)90154-510.1016/0001-6160(89)90154-5 ↗
7. 10.1007/BF0265165610.1007/BF02651656 ↗
8. 10.1007/BF0264708310.1007/BF02647083 ↗
9. 10.1016/0025-5416(88)90577-010.1016/0025-5416(88)90577-0 ↗
10. 10.1016/0025-5416(87)90542-810.1016/0025-5416(87)90542-8 ↗
11. 10.1016/0001-6160(87)90188-X10.1016/0001-6160(87)90188-X ↗
12. 10.1016/0001-6160(89)90341-610.1016/0001-6160(89)90341-6 ↗
13. 10.1007/BF0264394410.1007/BF02643944 ↗
14. 10.1007/BF0267193810.1007/BF02671938 ↗
15. 10.1016/0142-1123(89)90046-710.1016/0142-1123(89)90046-7 ↗
16. 10.1007/BF0265834410.1007/BF02658344 ↗
17. 10.1016/0921-5093(89)90376-610.1016/0921-5093(89)90376-6 ↗
18. WASÉN J. · Ada Stereol., · 1987 · 6 · 199
19. S. J. HARRIS and T. E. WILKS: in Proc. 6th Int. Conf. Compos. Mater. (ed. F. L. Matthews et al.), Vol. 2, 2113-2127; 1987, London, Elsevier Applied Sciences.
20. 10.1016/0142-1123(84)90004-510.1016/0142-1123(84)90004-5 ↗
21. D. BROEK: ‘Elementary engineering fracture mechanics’, 2 edn; 1978, Alpen an den Rhijn, Sijthoff & Nordhoff.
22. GOODIER I. N. · ASME Appl. Mech Mag., · 1933 · 55 · 3910.1115/1.4012173 ↗
23. 10.1007/BF0003268410.1007/BF00032684 ↗
24. 10.1115/1.317180410.1115/1.3171804 ↗
25. 10.1007/BF0001261910.1007/BF00012619 ↗
26. 10.1016/0001-6160(83)90046-910.1016/0001-6160(83)90046-9 ↗