journal article·2026-02-22

Understanding the interplay between microstructure, texture and mechanical properties in an advanced quenched and partitioned (Q&P) steel

Shibam Mishra, Indrajit Dey, Kaushik Das, Swarup Kumar Ghosh

Publisher page

Abstract

The vehicle light weighting and crash safety have intensified research into advanced high-strength steels, particularly quenching and partitioning (Q&P) grades with martensite (M), retained austenite (RA) and bainite (B) constituents. The influence of Nb microalloying on microstructural evolution, texture, and mechanical performance in high-carbon Q&P steels processed via industrially relevant routes remains unclear. In this study, one high-carbon Nb-microalloyed steel underwent two distinct processing conditions: Sample S1 was initially hot-rolled and then air-cooled to room temperature (RT), whereas Sample S2 underwent a one-step Q&P-treatment at 200 °C for 30 min. Microstructure, texture, and mechanical properties were systematically characterised using optical microscopy, SEM, TEM, electron back-scattered diffraction (EBSD), XRD, and mechanical testing. S1, because of air-cooling to RT, comprised M, pearlite, and RA, while the Q&P produced a multiphase microstructure in S2 containing tempered and fresh martensite, B and RA. S1 exhibited a higher ultimate tensile strength (∼2000 MPa) but lower ductility (12%), whereas S2 attained an enhanced elongation (∼19%) at a reduced strength (1888 MPa). XRD analysis revealed a higher RA volume in S2 (14.1%) compared to S1 (7.6%). Analysis of texture shows a higher intensity of the rotated cube (RC, {001}<110>) component in S1 (15.8%) than in S2 (7.5%), whereas a higher transformed brass component (TrB, {111}<112>) in S2 (5.9%) than in S1 (0.1%). The higher strength of S1 can be attributed to the combined effects of refined lath M morphology, higher dislocation density and a stronger RC component, whereas a higher RA fraction and stronger TrB component contribute to the higher elongation in S2. The tensile toughness increases from 230 to 340 MJ/m 3 after the Q&P treatment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Cultural Artifacts · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Indian Institute of Engineering Science and Technology (IIEST)

Research and Development Department, Product Development Group, Jindal Steel, Patratu, Ramgarh, Jharkhand, India

References (88)

Show source-provided references
1. 10.1016/S1359-6454(03)00059-410.1016/S1359-6454(03)00059-4 ↗
2. 10.1016/j.msea.2016.09.08710.1016/j.msea.2016.09.087 ↗
3. 10.1016/j.actamat.2016.04.04810.1016/j.actamat.2016.04.048 ↗
4. 10.1007/s11661-008-9609-z10.1007/s11661-008-9609-z ↗
5. 10.1016/j.msea.2014.09.04710.1016/j.msea.2014.09.047 ↗
6. 10.1016/j.actamat.2015.11.03210.1016/j.actamat.2015.11.032 ↗
7. 10.1016/j.msea.2016.08.09410.1016/j.msea.2016.08.094 ↗
8. 10.1016/j.msea.2008.08.02810.1016/j.msea.2008.08.028 ↗
9. 10.1016/j.msea.2014.03.05110.1016/j.msea.2014.03.051 ↗
10. 10.1080/02670836.2019.159102910.1080/02670836.2019.1591029 ↗
11. Bhadeshia HKDH, Honeycombe R. Steels: microstructure and properties. Oxford: Butterworth-Heinemann, 2006.
12. 10.1007/s11661-023-07085-x10.1007/s11661-023-07085-x ↗
13. 10.1016/j.actamat.2014.11.04910.1016/j.actamat.2014.11.049 ↗
14. 10.1007/s10853-025-11218-510.1007/s10853-025-11218-5 ↗
15. 10.1007/s10853-021-06270-w10.1007/s10853-021-06270-w ↗
16. 10.1007/s11661-024-07431-710.1007/s11661-024-07431-7 ↗
17. 10.1007/s11665-017-3052-510.1007/s11665-017-3052-5 ↗
18. 10.1016/j.jmrt.2022.04.06610.1016/j.jmrt.2022.04.066 ↗
19. 10.1007/s11665-017-2695-610.1007/s11665-017-2695-6 ↗
20. 10.3390/met1202017410.3390/met12020174 ↗
21. 10.1016/j.matchar.2023.11352310.1016/j.matchar.2023.113523 ↗
22. 10.1007/s11661-011-0648-510.1007/s11661-011-0648-5 ↗
23. 10.1007/s13369-024-08888-910.1007/s13369-024-08888-9 ↗
24. 10.1016/j.msea.2017.02.00310.1016/j.msea.2017.02.003 ↗
25. 10.1007/s12540-020-00726-510.1007/s12540-020-00726-5 ↗
26. 10.1016/j.msea.2010.02.02010.1016/j.msea.2010.02.020 ↗
27. 10.1080/25787616.2018.156016310.1080/25787616.2018.1560163 ↗
28. 10.1016/j.microrel.2006.07.03110.1016/j.microrel.2006.07.031 ↗
29. 10.3390/met1004050910.3390/met10040509 ↗
30. 10.1016/j.matchar.2018.01.04110.1016/j.matchar.2018.01.041 ↗
31. 10.3390/pr1302041110.3390/pr13020411 ↗
32. Beausir B Fundenberger J-J. Analysis tools for electron and x-ray diffraction. ATEX-software. Metz: Université de Lorraine 2017 https://www.atex-software.eu
33. ASTM E8/E8M; Standard test methods for tension testing of metallic materials. ASTM International: West Conshohocken PA USA 2022.
34. Gorni AA. Steel forming and heat treating handbook, Socorro, SP, Brazil, 2018. www.gorni.eng.br.
35. 10.1016/j.scriptamat.2007.10.04510.1016/j.scriptamat.2007.10.045 ↗
36. 10.1007/s12613-016-1239-710.1007/s12613-016-1239-7 ↗
37. 10.1016/j.matchar.2020.11022410.1016/j.matchar.2020.110224 ↗
38. 10.1098/rspa.2009.040710.1098/rspa.2009.0407 ↗
39. 10.1016/j.jmst.2021.05.00210.1016/j.jmst.2021.05.002 ↗
40. 10.1016/j.msea.2016.04.00510.1016/j.msea.2016.04.005 ↗
41. 10.1016/j.msea.2023.14478010.1016/j.msea.2023.144780 ↗
42. 10.3390/ma1502053910.3390/ma15020539 ↗
43. 10.1179/1743284714Y.000000071910.1179/1743284714Y.0000000719 ↗
44. 10.1016/j.msea.2014.07.05410.1016/j.msea.2014.07.054 ↗
45. 10.1016/j.jmrt.2025.05.18110.1016/j.jmrt.2025.05.181 ↗
46. 10.1016/j.pnsc.2016.03.00410.1016/j.pnsc.2016.03.004 ↗
47. 10.1016/j.jmrt.2022.01.07310.1016/j.jmrt.2022.01.073 ↗
48. 10.1080/21663831.2023.219491010.1080/21663831.2023.2194910 ↗
49. 10.1007/s10853-018-2036-710.1007/s10853-018-2036-7 ↗
50. 10.1016/j.actamat.2014.01.03910.1016/j.actamat.2014.01.039 ↗
51. 10.1088/1742-6596/1270/1/01203010.1088/1742-6596/1270/1/012030 ↗
52. 10.1016/j.msea.2022.14330110.1016/j.msea.2022.143301 ↗
53. 10.1016/j.scriptamat.2012.11.00310.1016/j.scriptamat.2012.11.003 ↗
54. 10.1016/j.actamat.2021.11717610.1016/j.actamat.2021.117176 ↗
55. 10.1007/s11661-017-4208-510.1007/s11661-017-4208-5 ↗
56. 10.1016/j.jmrt.2022.05.02510.1016/j.jmrt.2022.05.025 ↗
57. 10.1016/j.eng.2018.11.02410.1016/j.eng.2018.11.024 ↗
58. 10.1016/j.matchemphys.2007.08.01710.1016/j.matchemphys.2007.08.017 ↗
59. 10.3390/met1102018010.3390/met11020180 ↗
60. 10.1007/s42243-024-01259-610.1007/s42243-024-01259-6 ↗
61. 10.3390/met1202034410.3390/met12020344 ↗
62. 10.1016/j.commatsci.2022.11126510.1016/j.commatsci.2022.111265 ↗
63. 10.1016/j.matchar.2021.11116610.1016/j.matchar.2021.111166 ↗
64. 10.3390/ma1610385110.3390/ma16103851 ↗
65. 10.1063/1.360594510.1063/1.3605945 ↗
66. 10.1016/j.msea.2017.03.01710.1016/j.msea.2017.03.017 ↗
67. 10.1016/j.msea.2018.03.06110.1016/j.msea.2018.03.061 ↗
68. Diego-Calderón ID, Knijf DD, Molina-Aldareguia JM, et al. Effect of Q&P parameters on microstructure development and mechanical behaviour of Q&P steels. Rev Metal 2015; 51: e035.
69. 10.1007/s10853-022-07121-y10.1007/s10853-022-07121-y ↗
70. 10.1016/S1359-6462(02)00340-810.1016/S1359-6462(02)00340-8 ↗
71. 10.1016/j.msea.2021.14193710.1016/j.msea.2021.141937 ↗
72. 10.1016/j.matchar.2023.11284210.1016/j.matchar.2023.112842 ↗
73. 10.1016/j.jmrt.2023.08.22610.1016/j.jmrt.2023.08.226 ↗
74. 10.1016/j.msea.2016.05.04510.1016/j.msea.2016.05.045 ↗
75. 10.3390/met1210155410.3390/met12101554 ↗
76. 10.1007/s11661-016-3525-410.1007/s11661-016-3525-4 ↗
77. 10.1016/j.matdes.2019.10766810.1016/j.matdes.2019.107668 ↗
78. 10.1134/S0031918X2260108110.1134/S0031918X22601081 ↗
79. 10.1016/j.msea.2018.07.02710.1016/j.msea.2018.07.027 ↗
80. 10.1088/2053-1591/acd1d210.1088/2053-1591/acd1d2 ↗
81. 10.1016/j.jmrt.2023.01.06610.1016/j.jmrt.2023.01.066 ↗
82. 10.1007/s11665-008-9225-510.1007/s11665-008-9225-5 ↗
83. 10.1007/s12633-018-9973-210.1007/s12633-018-9973-2 ↗
84. 10.1038/s41598-019-43623-710.1038/s41598-019-43623-7 ↗
85. 10.1016/j.jmrt.2023.05.15310.1016/j.jmrt.2023.05.153 ↗
86. 10.1016/j.matchar.2023.11337710.1016/j.matchar.2023.113377 ↗
87. 10.1007/s10853-025-10680-510.1007/s10853-025-10680-5 ↗
88. 10.1002/srin.20060644110.1002/srin.200606441 ↗