journal article·2026-01-02

Effect of hot deformation on the evolution of microstructure, MnS inclusions and mechanical properties of non-quenched and tempered steel

Guoxing Qiu, Jianing Li, Qing Du, Feng Lu, Yongkun Yang, Xiangdong Xing

Publisher page

Abstract

Controlling the formation of small, dispersed spherical or spindle-shaped MnS has always been a key challenge in the development of high-quality non-quenched and tempered steel during the rolling. In this study, the Gleeble-3800 thermal simulator was first used to investigate the evolution of flow stress, microstructure, and MnS during the hot deformation of Ti-Zr-treated F38MnVS steel. A high-precision hot deformation constitutive equation and processing map were established, providing a theoretical basis for achieving the desired microstructure and MnS morphology during rolling. Subsequently, laboratory rolling experiments were conducted to study the effects of rolling temperature on MnS, microstructure, and mechanical properties of steel. The results indicate that hot deformation at 950–1050°C and a strain rate of 0.1–0.5 s −1 leads to a uniform dynamically recrystallized microstructure. Within this deformation range, MnS exhibits low relative plasticity, making it prone to fragmentation, thereby enabling the control of MnS size and aspect ratio. Low-temperature rolling is beneficial for grain refinement, MnS spheroidization and mechanical properties, while reducing anisotropy in plasticity and toughness of the steel. The average grain size of 950-R steel is 9.2 μm, the aspect ratio of MnS in the rolling and transverse directions was 2.7 and 1.9, respectively. The yield strength in the rolling direction was 875 MPa, and 869 MPa transversely; elongation was 28.3% and 27.1%; area reduction was 53.2% and 50.1%; and impact energies were 81.4 J and 78.4 J, respectively. The steel exhibited high strength, toughness, and reduced anisotropy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Xi’an University of Architecture and Technology

State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an, Shaanxi, China

Key Laboratory of Metal High Performance Additive Manufacturing and Innovative Design, MIIT China, Northwestern Polytechnical University, Xi’an, Shaanxi, China

Technology Center, Shandong Iron and Steel Company Ltd., Ji’nan, Shandong, China

Funding

The “Unveiling and Commanding” Technology Tackling Project of the Science and Technology Bureau of Jiayuguan City · The Guangxi Science and Technology Base and Talent Special Project

References (43)

Show source-provided references
1. 10.1007/s42243-023-01146-610.1007/s42243-023-01146-6 ↗
2. 10.1007/s11663-019-01532-010.1007/s11663-019-01532-0 ↗
3. 10.1016/j.msea.2023.14529910.1016/j.msea.2023.145299 ↗
4. 10.1007/s42243-022-00829-w10.1007/s42243-022-00829-w ↗
5. 10.1007/s42243-024-01200-x10.1007/s42243-024-01200-x ↗
6. 10.1002/srin.20170013310.1002/srin.201700133 ↗
7. Wang ZH, Hui WJ, Zhang YJ, et al. Effect of sulfide morphology on anisotropic mechanical properties of microalloyed forging steel. J Iron Steel Res 2019; 31: 327–335.
8. 10.1016/j.matchar.2015.06.00110.1016/j.matchar.2015.06.001 ↗
9. Tian J, Wang DY, Qu TP. Methods and progress in study of morphology control of MnS in steel. J Iron Steel Res 2024; 36: 163–176.
10. 10.1007/s12540-018-0191-710.1007/s12540-018-0191-7 ↗
11. 10.1007/s11663-023-02882-610.1007/s11663-023-02882-6 ↗
12. 10.1080/03019233.2018.149117010.1080/03019233.2018.1491170 ↗
13. 10.3390/ma1416442410.3390/ma14164424 ↗
14. Wang Y, Zhu LG, Huo JX, et al. Relationship between crystallographic structure of complex inclusions MgAl2O4/Ti2O3/MnS and improved toughness of heat-affected zone in shipbuilding steel. J Iron Steel Res Int 2022; 59: 1227–1290.
15. 10.1002/srin.20150044010.1002/srin.201500440 ↗
16. 10.2355/isijinternational.ISIJINT-2017-61710.2355/isijinternational.ISIJINT-2017-617 ↗
17. 10.2355/isijinternational.ISIJINT-2018-08110.2355/isijinternational.ISIJINT-2018-081 ↗
18. Qiu GX, Zhang HZ, Lu F, et al. Effect of Y and Zr on MnS and microstructure and mechanical properties of non-quenched and tempered steel. China Metall 2024; 34: 11–19.
19. 10.1002/srin.20240015310.1002/srin.202400153 ↗
20. 10.1002/srin.20240057410.1002/srin.202400574 ↗
21. Baker TJ, Charles JA. Deformation of MnS inclusions in steel. J Iron Steel Inst 1972; 210: 680–690.
22. Shao XJ, Lv LG, Du Q, et al. Thermal deformation behavior of MnS inclusions in non-quenched and tempered steel. Heat Treat Met 2018; 43: 144–147.
23. Jian L, Chen WQ, Meng JX, et al. Sulfide shape control in non quenched and tempered steel containing sulphur. Iron Steel 2006; 41: 74–77.
24. Lou DC, Cui K, Wu XC, et al. Behaviour of MnS during hot deformation. J Iron Steel Res 1996: 11–14. DOI: https://doi.org/10.13228/j.boyuan.issn1001-0963.1996.06.005.
25. 10.1016/j.jallcom.2022.16416110.1016/j.jallcom.2022.164161 ↗
26. 10.1016/j.msea.2013.08.06610.1016/j.msea.2013.08.066 ↗
27. 10.1016/j.msea.2015.03.10410.1016/j.msea.2015.03.104 ↗
28. 10.1016/j.jmatprotec.2016.06.00810.1016/j.jmatprotec.2016.06.008 ↗
29. 10.1002/srin.20170014910.1002/srin.201700149 ↗
30. 10.1016/j.commatsci.2009.06.02610.1016/j.commatsci.2009.06.026 ↗
31. Sellars CM, McTegart WJ. On the mechanism of hot deformation. Mem Sci Rev Met 1966; 63: 731–746.
32. Qiu GX, Bai C, Cai MC, et al. Strain compensation constitutive equation and hot processing map of RAFM steel. Iron Steel 2022; 57: 157–166.
33. 10.1007/BF0266490210.1007/BF02664902 ↗
34. 10.1179/imr.1998.43.6.24310.1179/imr.1998.43.6.243 ↗
35. 10.1016/j.jallcom.2019.06.24210.1016/j.jallcom.2019.06.242 ↗
36. 10.1016/j.jre.2019.09.00710.1016/j.jre.2019.09.007 ↗
37. 10.2355/isijinternational.ISIJINT-2022-23510.2355/isijinternational.ISIJINT-2022-235 ↗
38. 10.1016/j.jmrt.2022.04.06710.1016/j.jmrt.2022.04.067 ↗
39. 10.1016/j.msea.2018.02.05210.1016/j.msea.2018.02.052 ↗
40. 10.1002/srin.20180031810.1002/srin.201800318 ↗
41. 10.1179/mst.1996.12.7.55710.1179/mst.1996.12.7.557 ↗
42. 10.1007/s11661-007-9122-910.1007/s11661-007-9122-9 ↗
43. Li ML, Wang FM, Li CR, et al. In-situ observation of MnS effect on the tensile strength anisotropy of non-quenched and tempered steel. Chinese J Eng 2016; 38: 1257–1263.