Investigation of element transfer and microhardness in weld beads using formulated Na 3 AlF 6 -CaO-Al 2 O 3 -SiO 2 coatings for SMAW nickel wire
Source abstract
Abstract
This research investigates the impact of shielded metal arc welding (SMAW) electrode coating flux on microhardness, microstructure, and element transfer. A mixture design approach was employed to formulate the flux compositions, and multi-pass bead-on-plate experiments were conducted. Regression analysis was used to evaluate the relationship between microhardness and weld bead chemistry. The results indicated that the presence of CaO, Al 2 O 3 , and SiO 2 positively influences the transfer of nickel from the electrode to the weld pool. Increased levels of Na 3 AlF 6 , SiO 2 , and CaO positively affected chromium transfer, while Al 2 O 3 led to a decrease in chromium transfer. Manganese transfer was enhanced by CaO and Na 3 AlF 6 , but reduced with higher concentrations of Al 2 O 3 and SiO 2 . Furthermore, an increase in SiO 2 raised the oxygen potential, contributing to a loss of manganese in the Weld. The results indicate that increasing Al 2 O 3 positively affects iron transfer, while higher concentrations of Na 3 AlF 6 , SiO 2 , Al 2 O 3 , and CaO improve niobium transfer. Microhardness increases with higher levels of CaO, Na 3 AlF 6 , and SiO 2 , although Al 2 O 3 has a reducing effect. The welds were further analyzed through microstructural analysis. In addition, artificial neural network (ANN) models were developed, demonstrating improved prediction accuracy compared to traditional approaches.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
IIT Jodhpur
Navajo Technical University
References (45)
Show source-provided references
1. 10.1016/j.ijpvp.2007.08.00410.1016/j.ijpvp.2007.08.004 ↗
2. Gupta A, Singh J, Chhibber R. Dissimilar welding of austenitic and ferritic steels using nickel and stainless-steel filler: associated issues, proc. Inst Mech Eng Part E J Process Mech Eng 2023; 238: 2524–2544.
3. 10.1007/s13632-016-0311-z10.1007/s13632-016-0311-z ↗
4. 10.1016/j.jmatprotec.2017.04.00910.1016/j.jmatprotec.2017.04.009 ↗
5. 10.1016/j.matchar.2016.11.02910.1016/j.matchar.2016.11.029 ↗
6. 10.1016/j.jmatprotec.2005.06.08310.1016/j.jmatprotec.2005.06.083 ↗
7. 10.1039/tf924200016810.1039/tf9242000168 ↗
8. 10.1080/10426914.2023.223804310.1080/10426914.2023.2238043 ↗
9. 10.1007/BF0267252810.1007/BF02672528 ↗
10. 10.1007/BF0267253010.1007/BF02672530 ↗
11. Tuliani N, Boniszewski NN, Eaton T. Notch toughness of commercial submerged arc weld metal. Weld Met Fabr 1969; 37: 327–339.
12. 10.1146/annurev.ms.16.080186.00213310.1146/annurev.ms.16.080186.002133 ↗
13. 10.1016/j.ceramint.2021.01.10610.1016/j.ceramint.2021.01.106 ↗
14. Bhandari D, Chhibber R, Arora N, et al. Investigations on weld metal chemistry and mechanical behaviour of bimetallic welds using CaO–CaF2–SiO2–Ni based electrode coatings. Proc Inst Mech Eng Part LJ Mater Des Appl 2019; 233: 563–579.
15. Sham K, Liu S. Flux-coating development for SMAW consumable electrode of high-nickel alloys. Weld J 2014; 93: 271s–281s. http://files.aws.org/wj/supplement/WJ_2014_08_s271.pdf
16. 10.1016/j.jnoncrysol.2013.08.01010.1016/j.jnoncrysol.2013.08.010 ↗
17. 10.1007/s11663-022-02507-410.1007/s11663-022-02507-4 ↗
18. 10.1007/s11661-016-3629-x10.1007/s11661-016-3629-x ↗
19. 10.1007/s11663-021-02221-710.1007/s11663-021-02221-7 ↗
20. 10.1115/1.403112910.1115/1.4031129 ↗
21. 10.1007/s11663-020-01935-410.1007/s11663-020-01935-4 ↗
22. 10.1007/s11663-021-02391-410.1007/s11663-021-02391-4 ↗
23. 10.1007/s11837-024-06595-210.1007/s11837-024-06595-2 ↗
24. 10.1016/j.jnoncrysol.2015.10.00910.1016/j.jnoncrysol.2015.10.009 ↗
25. Matsushita M, Liu S. Hydrogen control in steel weld metal by means of fluoride additions in welding flux. Weld J (Miami, Fla) 2000; 79.
26. 10.1007/s12633-022-02258-610.1007/s12633-022-02258-6 ↗
27. 10.1179/03019230067753410.1179/030192300677534 ↗
28. 10.1016/0924-0136(94)90486-310.1016/0924-0136(94)90486-3 ↗
29. 10.1007/s12633-024-02941-w10.1007/s12633-024-02941-w ↗
30. 10.1177/0954406224128109210.1177/09544062241281092 ↗
31. 10.1016/j.matdes.2020.10891210.1016/j.matdes.2020.108912 ↗
32. 10.1080/10426914.2023.221791010.1080/10426914.2023.2217910 ↗
33. Lippold JC, Nissley NE. Ductility-dip cracking in high chromium, Ni-base filler metals, hot crack. Phenom Welds 2008; II: 409–425.
34. 10.1016/j.matchar.2018.02.04410.1016/j.matchar.2018.02.044 ↗
35. Gupta A, Singh J, Chhibber R. Modeling of physicochemical and thermophysical characteristics of SrO-CaO-Al2O3 -CaF 2 -based shielded metal arc welding coating. Proc Inst Mech Eng Part E J Process Mech Eng 2023; 239: 167–180.
36. 10.1007/s11663-024-03170-710.1007/s11663-024-03170-7 ↗
37. 10.1080/00401706.1966.1049037710.1080/00401706.1966.10490377 ↗
38. 10.1016/j.aei.2018.05.00610.1016/j.aei.2018.05.006 ↗
39. Du Plessis J, Du Toit M, Pistorius PC. Control of diffusible weld metal hydrogen through flux chemistry modification. Weld J (Miami, Fla) 2007; 86: 273s–280s.
40. Chai CS, Eagar TW. Slag metal reactions in binary CaF2-METAL OXIDE WELDING FLUXES., WELD. J (Miami, Fla) 1982; 61: 229–232. https://s3.us-east-1.amazonaws.com/WJ-www.aws.org/supplement/WJ_1982_07_s229.pdf
41. Kim JH Frost RH Olson DL et al. Effect of Electrochemical Reactions on Submerged Arc Weld Metal Composition. 1987: 224–225.
42. 10.1016/j.jmatprotec.2019.02.02410.1016/j.jmatprotec.2019.02.024 ↗
43. 10.1007/s00170-017-0589-210.1007/s00170-017-0589-2 ↗
44. 10.1016/j.vacuum.2014.08.01610.1016/j.vacuum.2014.08.016 ↗
45. 10.1007/BF0264392310.1007/BF02643923 ↗