journal article·2025-11-14

Influence of chemical composition and processing on improvement of cryogenic temperature toughness and strength in Ni steel: A review

Gautam Mishra, Sudipta Patra

Publisher page

Abstract

In response to the rising demand for the storage and transportation of gases at cryogenic temperatures, extensive studies have been conducted, with over 100 research papers. These structural materials must exhibit outstanding mechanical properties, including high toughness and impressive strength, to ensure reliable performance in extremely low-temperature conditions, which can significantly alter material behavior. The role of composition, heat treatment processing, and microstructures on mechanical properties have been correlated with the cryogenic toughness. The retained austenite stabilization mechanism during heat treatment and the role of retained austenite on toughness are critically reviewed. There are numerous conflicting reports and significant advancements in cryogenic toughness while maintaining the high strength of nickel steels. The present study extensively reviewed all the major studies reported on cryogenic toughness in Ni steels and finally provided future directions in this area.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Indian Institute of Technology (Banaras Hindu University)

References (100+)

Show source-provided references
1. 10.1016/j.msea.2018.03.05610.1016/j.msea.2018.03.056 ↗
2. 10.1142/S201019451200343110.1142/S2010194512003431 ↗
3. 10.1007/s40195-016-0496-910.1007/s40195-016-0496-9 ↗
4. 10.1007/s11661-017-4146-210.1007/s11661-017-4146-2 ↗
5. 10.1016/j.engfailanal.2018.11.01110.1016/j.engfailanal.2018.11.011 ↗
6. 10.1007/s11665-023-08129-410.1007/s11665-023-08129-4 ↗
7. 10.1002/srin.20070587910.1002/srin.200705879 ↗
8. Saitoh N Muraoka H Yamaba R et al. Development of heavy 9% nickel steel plates with superior low-temperature toughness for LNG storage tanks. 1993.
9. 10.1016/j.matdes.2012.07.04310.1016/j.matdes.2012.07.043 ↗
10. Reviewed P Berkeley L Cancer B. Lawrence Berkeley National Laboratory Lawrence Berkeley National Laboratory. 2010: 35–43.
11. 10.1016/j.matdes.2025.11431810.1016/j.matdes.2025.114318 ↗
12. 10.1007/s12598-015-0607-110.1007/s12598-015-0607-1 ↗
13. 10.3390/met1305089210.3390/met13050892 ↗
14. 10.1016/j.msea.2024.14716710.1016/j.msea.2024.147167 ↗
15. 10.1016/j.actamat.2015.08.02710.1016/j.actamat.2015.08.027 ↗
16. 10.1016/j.msea.2015.05.09510.1016/j.msea.2015.05.095 ↗
17. 10.1016/j.actamat.2015.06.02410.1016/j.actamat.2015.06.024 ↗
18. 10.1007/s11661-014-2513-910.1007/s11661-014-2513-9 ↗
19. 10.1016/j.scriptamat.2021.11434310.1016/j.scriptamat.2021.114343 ↗
20. 10.1016/j.msea.2012.02.02410.1016/j.msea.2012.02.024 ↗
21. 10.1016/j.actamat.2011.03.02510.1016/j.actamat.2011.03.025 ↗
22. 10.1007/BF0265831710.1007/BF02658317 ↗
23. 10.1016/0036-9748(78)90303-410.1016/0036-9748(78)90303-4 ↗
24. 10.1016/j.actamat.2013.03.01610.1016/j.actamat.2013.03.016 ↗
25. 10.1016/j.actamat.2014.12.02110.1016/j.actamat.2014.12.021 ↗
26. 10.1016/j.actamat.2016.09.04810.1016/j.actamat.2016.09.048 ↗
27. 10.1016/j.actamat.2018.06.01910.1016/j.actamat.2018.06.019 ↗
28. 10.1016/j.msea.2018.03.11110.1016/j.msea.2018.03.111 ↗
29. 10.1016/j.matchar.2017.11.05410.1016/j.matchar.2017.11.054 ↗
30. 10.1016/j.scriptamat.2013.05.04210.1016/j.scriptamat.2013.05.042 ↗
31. 10.1016/j.scriptamat.2018.11.05010.1016/j.scriptamat.2018.11.050 ↗
32. 10.1016/j.actamat.2016.04.03810.1016/j.actamat.2016.04.038 ↗
33. 10.1007/s11661-011-0636-910.1007/s11661-011-0636-9 ↗
34. 10.1016/j.actamat.2014.07.00510.1016/j.actamat.2014.07.005 ↗
35. 10.1016/j.msea.2015.02.07510.1016/j.msea.2015.02.075 ↗
36. 10.1007/s40195-018-0700-110.1007/s40195-018-0700-1 ↗
37. 10.1016/j.mtla.2024.10218310.1016/j.mtla.2024.102183 ↗
38. 10.1016/j.msea.2022.14370310.1016/j.msea.2022.143703 ↗
39. 10.1016/j.msea.2020.13918610.1016/j.msea.2020.139186 ↗
40. 10.1002/srin.20240084810.1002/srin.202400848 ↗
41. 10.1016/j.msea.2021.14235610.1016/j.msea.2021.142356 ↗
42. 10.1088/2053-1591/acffa910.1088/2053-1591/acffa9 ↗
43. 10.1007/BF0265348810.1007/BF02653488 ↗
44. 10.1016/j.msea.2021.14106010.1016/j.msea.2021.141060 ↗
45. 10.1016/j.msea.2015.09.00810.1016/j.msea.2015.09.008 ↗
46. 10.1016/j.scriptamat.2015.04.00910.1016/j.scriptamat.2015.04.009 ↗
47. 10.1016/j.prostr.2024.04.03210.1016/j.prostr.2024.04.032 ↗
48. 10.1016/j.mtla.2022.10146010.1016/j.mtla.2022.101460 ↗
49. 10.1016/j.ijplas.2025.10442010.1016/j.ijplas.2025.104420 ↗
50. 10.1016/S1006-706X(15)30122-910.1016/S1006-706X(15)30122-9 ↗
51. 10.1016/j.msea.2025.14874010.1016/j.msea.2025.148740 ↗
52. 10.1007/BF0264710410.1007/BF02647104 ↗
53. 10.1007/s11661-020-05730-310.1007/s11661-020-05730-3 ↗
54. 10.1007/s40195-018-0828-z10.1007/s40195-018-0828-z ↗
55. 10.1016/j.ijhydene.2019.01.06510.1016/j.ijhydene.2019.01.065 ↗
56. 10.1016/j.msea.2017.11.00310.1016/j.msea.2017.11.003 ↗
57. Wang Y, Zhang Y, Godfrey A, et al. Cryogenic toughness in a low-cost austenitic steel. Commun Mater 2021; 44: 1–10.
58. 10.1016/j.actamat.2014.11.02710.1016/j.actamat.2014.11.027 ↗
59. 10.1016/j.msea.2020.13939710.1016/j.msea.2020.139397 ↗
60. 10.3390/en1806154310.3390/en18061543 ↗
61. 10.1520/MPC2020019310.1520/MPC20200193 ↗
62. 10.1016/j.paerosci.2011.06.00210.1016/j.paerosci.2011.06.002 ↗
63. Cooray V Prez H. ! I I I I I T I . I I I I I I Tilt I I T I I I I. 99 (1994).
64. Watanabe I, Suzuki M, Matsuda Y, et al. Fracture toughness of 9% Ni steel and safety of lng storage tank against brittle fracture. Nippon Kokan Tech Rep Overseas 1984: 2–10.
65. Tagawa H, Matsui K, Izawa T, et al. Nine-percent Ni steel plates manufactured by the direct-quenching and tempering process. Nippon Kokan Tech Rep Overseas 1986: 112–119.
66. Hoshino M Saitoh N Muraoka H et al. Development of super-9%Ni steel plates with superior low-temperature toughness for LNG storage tanks. Nippon Steel Tech Rep 2004: 20–24.
67. 10.1016/S1006-706X(11)60064-210.1016/S1006-706X(11)60064-2 ↗
68. 10.1103/PhysRevB.72.13410710.1103/PhysRevB.72.134107 ↗
69. 10.1016/0036-9748(73)90189-010.1016/0036-9748(73)90189-0 ↗
70. 10.1007/BF0035291110.1007/BF00352911 ↗
71. 10.2355/isijinternational.40.123710.2355/isijinternational.40.1237 ↗
72. 10.1016/j.scriptamat.2019.06.03610.1016/j.scriptamat.2019.06.036 ↗
73. 10.1016/j.msea.2009.04.06310.1016/j.msea.2009.04.063 ↗
74. 10.1016/j.jallcom.2012.02.01510.1016/j.jallcom.2012.02.015 ↗
75. Conde FF, Escobar JD, Oliveira JP, et al. Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel. Addit Manuf 2019; 29: 100804.
76. 10.1007/s10853-021-05993-010.1007/s10853-021-05993-0 ↗
77. 10.1016/j.matlet.2023.13449510.1016/j.matlet.2023.134495 ↗
78. 10.1016/j.matchemphys.2023.12866610.1016/j.matchemphys.2023.128666 ↗
79. 10.1179/03063457979043432110.1179/030634579790434321 ↗
80. Sun Y, Wu Z, Wang P, et al. Based on the thermomechanical control process–ultrafast cooling–intercritical annealing and tempering process: effect of intercritical annealing temperature on the microstructure and mechanical properties of Cr-alloyed 5.5% Ni steels. Steel Res Int 2025; 2400848: 1–13.
81. 10.1007/s11665-018-3257-210.1007/s11665-018-3257-2 ↗
82. 10.1007/s10853-019-04029-y10.1007/s10853-019-04029-y ↗
83. 10.1007/s11661-017-4200-010.1007/s11661-017-4200-0 ↗
84. 10.1080/09506608.2023.219961710.1080/09506608.2023.2199617 ↗
85. 10.1179/1743284714Y.000000072210.1179/1743284714Y.0000000722 ↗
86. 10.1016/j.scriptamat.2010.09.04010.1016/j.scriptamat.2010.09.040 ↗
87. 10.1007/BF0303785510.1007/BF03037855 ↗
88. 10.1016/j.actamat.2013.12.03810.1016/j.actamat.2013.12.038 ↗
89. 10.1080/02670836.2015.111425210.1080/02670836.2015.1114252 ↗
90. 10.1007/s10853-019-03319-910.1007/s10853-019-03319-9 ↗
91. 10.1016/j.scriptamat.2010.12.01210.1016/j.scriptamat.2010.12.012 ↗
92. 10.1016/j.actamat.2011.08.03010.1016/j.actamat.2011.08.030 ↗
93. 10.1016/j.scriptamat.2011.04.01010.1016/j.scriptamat.2011.04.010 ↗
94. 10.1007/s11661-011-0687-y10.1007/s11661-011-0687-y ↗
95. 10.1007/s11661-012-1402-310.1007/s11661-012-1402-3 ↗
96. 10.1016/j.actamat.2021.11750610.1016/j.actamat.2021.117506 ↗
97. 10.1016/j.msea.2021.14189910.1016/j.msea.2021.141899 ↗
98. 10.3390/ma1705101210.3390/ma17051012 ↗
99. 10.1016/j.msea.2021.14195910.1016/j.msea.2021.141959 ↗
100. 10.1016/j.cossms.2011.04.00210.1016/j.cossms.2011.04.002 ↗