journal article·2025-04-24

Effect of matrix particle size on tribological behavior of copper-based friction materials

Shen Wu, Shiqiang Li, Shengli Pan, Jianxiu Liu, Yan Wang, Jianglei Fan, Xiangkui Zhou, Ying Li

Publisher page

Abstract

In this work, copper-based friction materials with different copper particle sizes are prepared by the hot press sintering, and the effect of copper matrix size on the microstructure, mechanical and friction/wear properties of materials are investigated. The results show that: As the particle size of the copper powder increase, the mechanical properties of the material continue to decrease. The copper powder of sample 3 (75 μm) can effectively change the bonding state of the hard phase and the matrix on the friction surface, and reduce surface voids. Moreover, when the pressure reaches 10 MPa, sample 3 exhibits excellent friction properties with the largest coefficient of friction (about 0.43) and the minimum amount of wear (about 7 mg).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou, China

Henan Key Laboratory of Mechanical Equipment Intelligent Manufacturing, Zhengzhou University of Light Industry, Zhengzhou, China

References (30)

Show source-provided references
1. Zhao NQ, Guo SY, Zhang X, et al. Research progress on graphene/Cu composites based on reinforced phase configuration design. Acta Metall Sin 2021; 57: 1087–1106.
2. 10.1007/s11249-015-0605-310.1007/s11249-015-0605-3 ↗
3. Wang YT, Zou CL, Li CM, et al. Research progress of high performance copper matrix composites. Acta Mater Compos Sin 2023; 40: 5542–5553.
4. Li ZH, Yi JH, You X, et al. Interface control and properties of boron nitride nanosheet reinforced copper matrix composites. Acta Mater Compos Sin 2024; 41: 2683–2693.
5. 10.1016/j.wear.2012.05.00110.1016/j.wear.2012.05.001 ↗
6. Yu X, Guo ZM, Yang J. Effect of content and friction components on properties of copper-based powder metallurgy friction material. Powder Metall Technol 2014; 32: 43–47.
7. Xiao JK, Li TT, Chen J, et al. Research progress on composition design of copper-based friction materials for high-speed trains. Mater Guide 2023; 37: 149–159.
8. 10.1016/j.apsusc.2015.06.13510.1016/j.apsusc.2015.06.135 ↗
9. 10.1016/j.ijplas.2018.10.01310.1016/j.ijplas.2018.10.013 ↗
10. 10.1016/j.matdes.2016.12.04210.1016/j.matdes.2016.12.042 ↗
11. 10.1016/j.jpcs.2012.08.00210.1016/j.jpcs.2012.08.002 ↗
12. Liu JX, Jia DJ, Fan JL, et al. Effect of grain size of copper matrix on properties of copper based powder metallurgy friction materials. J Mater Metall 2018; 17: 69–74.
13. 10.1016/j.triboint.2017.11.03810.1016/j.triboint.2017.11.038 ↗
14. Fan JL, Wang JJ, Wang X, et al. Effect of graphite type on friction and wear properties of copper-based powder metallurgy friction materials. Powder Metall Ind 2024; 34: 51–59.
15. 10.1080/02670836.2017.141200710.1080/02670836.2017.1412007 ↗
16. Fan ZY, Ye YP, Wang Y, et al. Effect of iron powder particle size on brake friction performance of powder metallurgy materials. Powder Metall Ind 2016; 26: 28–33.
17. 10.1016/j.triboint.2015.05.00310.1016/j.triboint.2015.05.003 ↗
18. Ou YX, Wang HQ, Pang P, et al. Tribological properties of CrN/TiN superlattice coatings deposited by deep oscillating magnetron sputtering. Rare Met Mater Eng 2020; 49: 2476–2479.
19. Bhushan B (author) and Ge S (translator). Introduction to tribology. Beijing: China Machine Industry Press, 2006, p.71–123.
20. Yang WK, Guo XY, Zeng HR, et al. Experimental study on heat transfer interface contact resistance of ODS MA754 alloy. J Xi'an Jiaotong Univ 2024; 58: 100–108.
21. Gao HX, Liu JX, Zhu RM. Research on friction and wear properties of copper-based powder metallurgy train brake shoe materials. Mater Sci Eng 2005; 23: 871–874.
22. Zhou R, Han WJ, Shi WW, et al. Friction and wear properties of carbon-ceramic composites. Mechanical Eng Mater 2022; 46: 57–62.
23. Liu JX, Hao YF, Fan JL, et al. Effect of mixing time on properties of copper-based friction materials containing graphite. Powder Metall Ind 2020; 30: 37–41.
24. 10.1016/j.acme.2016.10.00510.1016/j.acme.2016.10.005 ↗
25. Shi MX, Wang XD, Li JY, et al. Microstructure and properties of boronized layer of AISI 410 steel by paste boronizing process. Metals Heat Treat Treatment 2022; 47: 245–250.
26. Xu Q, Zhang C, Fan JL, et al. Effect of Cr-Fe particle size on friction and wear properties of copper-based powder metallurgy materials. Spec Cast Nonferr Alloys 2024; 44: 587–590.
27. Luan SJ, Gao MH, Xu N, et al. Study on erosion resistance of NiCrFeAl/h-BN·SiO2 abradable sealing coating. Rare Met Mater Eng 2022; 51: 2115–2121.
28. Zhang JP, Zhang WW, Qi J, et al. Tribological properties of 45 steel under dry friction. Poly Mater Sci Eng 2024; 40: 115–123.
29. Xiao XJ, Yue SW, Xie JM, et al. Friction and wear properties of PEEK and PEEK/CF composites at elevated temperatures. Eng Plastics Appl 2023; 51: 119–126.
30. Zhao WX, Zhou Z, Huang J, et al. Microstructure and friction and wear behavior of FeCrNiMo laser cladding layer. Acta Metall Sin 2021; 57: 1291–1298.