Investigation of microstructure, wear behavior and mechanical properties of Al/Cu-SiCw composite
Source abstract
Abstract
Ceramic-metal composites are often used in transportation industry such as car and airplane components thanks to their high strength and low weight. This paper investigates the effect of rolling reductions on microstructure, mechanical properties, and wear resistance of Al/Cu-SiC/Al composites. By increasing the rolling reductions, the SiC whiskers were broken and better distributed in the Cu matrix. Applying the roll bonding resulted in reduced grain size of Al and Cu-SiC layers. The most pronounced reduction of grain sizes was seen in 60% rolled composites. In addition, the tensile strength of composites increased to 271 MPa in 60% rolled composite. Furthermore, the fracture surfaces showed ductile fracture on Al and Cu-SiC layers. The number of dimples and cracks decreased at higher rolling reductions. In 60% rolled composite, the maximum hardness of 58 HV and 164 HV were measured in Al and Cu-SiC layers. By increasing the rolling reduction, the wear resistance of composites improved. The minimum value of mass loss was measured in 60% rolled composite.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Sichuan Top Information Technology Vocational College, Sichuan, China
Razi University
References (89)
Show source-provided references
1. 10.1007/s10483-023-2962-910.1007/s10483-023-2962-9 ↗
2. 10.1016/j.asoc.2023.11099110.1016/j.asoc.2023.110991 ↗
3. 10.1016/j.cemconres.2025.10781910.1016/j.cemconres.2025.107819 ↗
4. 10.1016/j.ijhydene.2025.02.01710.1016/j.ijhydene.2025.02.017 ↗
5. 10.1088/1361-665X/ad59e610.1088/1361-665X/ad59e6 ↗
6. 10.1016/j.triboint.2023.10821810.1016/j.triboint.2023.108218 ↗
7. 10.1016/j.jmapro.2024.10.00410.1016/j.jmapro.2024.10.004 ↗
8. 10.1016/j.msea.2024.14677410.1016/j.msea.2024.146774 ↗
9. 10.1016/j.msea.2024.14642310.1016/j.msea.2024.146423 ↗
10. 10.1016/j.jmrt.2024.05.26610.1016/j.jmrt.2024.05.266 ↗
11. 10.1039/D3JA00453H10.1039/D3JA00453H ↗
12. 10.1080/17452759.2024.240939010.1080/17452759.2024.2409390 ↗
13. 10.1016/j.jmst.2023.11.05410.1016/j.jmst.2023.11.054 ↗
14. 10.1016/j.matchar.2022.11173610.1016/j.matchar.2022.111736 ↗
15. 10.1016/j.jallcom.2024.17803210.1016/j.jallcom.2024.178032 ↗
16. 10.1016/j.matdes.2022.11140810.1016/j.matdes.2022.111408 ↗
17. 10.1007/s00170-023-12528-110.1007/s00170-023-12528-1 ↗
18. 10.1016/j.engfailanal.2024.10908310.1016/j.engfailanal.2024.109083 ↗
19. 10.1016/j.msea.2024.14654710.1016/j.msea.2024.146547 ↗
20. 10.1016/j.actamat.2024.12041310.1016/j.actamat.2024.120413 ↗
21. 10.1016/j.matchar.2023.11338910.1016/j.matchar.2023.113389 ↗
22. Bai C, Liu T, Shi L, et al. Effect of different Mg2Si concentrations on the wear properties and microstructure of Mg2Si/Al–5wt.% Cu composites. International Journal of Metalcasting 2024; 19: 1–13.
23. 10.3390/nano1424203410.3390/nano14242034 ↗
24. 10.1016/j.heliyon.2024.e3525910.1016/j.heliyon.2024.e35259 ↗
25. 10.1016/j.vacuum.2024.11350910.1016/j.vacuum.2024.113509 ↗
26. 10.1016/j.jre.2022.05.01810.1016/j.jre.2022.05.018 ↗
27. 10.1016/j.jallcom.2022.16799810.1016/j.jallcom.2022.167998 ↗
28. 10.1038/s41598-024-57849-710.1038/s41598-024-57849-7 ↗
29. 10.1016/j.jmrt.2024.01.16410.1016/j.jmrt.2024.01.164 ↗
30. 10.1016/S0263-8231(00)00004-510.1016/S0263-8231(00)00004-5 ↗
31. 10.1080/17452759.2024.241736910.1080/17452759.2024.2417369 ↗
32. 10.1016/j.scriptamat.2024.11629610.1016/j.scriptamat.2024.116296 ↗
33. 10.1016/j.jmrt.2025.01.23910.1016/j.jmrt.2025.01.239 ↗
34. 10.3390/coatings1401002510.3390/coatings14010025 ↗
35. 10.1016/j.jmrt.2023.11.17010.1016/j.jmrt.2023.11.170 ↗
36. 10.3390/technologies502003210.3390/technologies5020032 ↗
37. 10.1016/j.ijrmhm.2010.09.00110.1016/j.ijrmhm.2010.09.001 ↗
38. 10.1007/s00170-011-3493-110.1007/s00170-011-3493-1 ↗
39. 10.1088/2631-8695/ac71f710.1088/2631-8695/ac71f7 ↗
40. Rajkumar Reddy M Gugulothu SK Krishnaiah T et al. Optimization and Comparative Analysis of Machining Performance of Al–Cu–SiC–GNP Composite: Influence of Reinforcement Variations Using Machine Learning RSM and ANOVA Validation Advanced Engineering Materials 2402860.
41. 10.1016/j.matpr.2019.12.12810.1016/j.matpr.2019.12.128 ↗
42. 10.1177/0021998323118620510.1177/00219983231186205 ↗
43. 10.1016/j.mtcomm.2023.10772210.1016/j.mtcomm.2023.107722 ↗
44. 10.2320/matertrans.MT-D202100610.2320/matertrans.MT-D2021006 ↗
45. 10.1080/10426914.2017.132812210.1080/10426914.2017.1328122 ↗
46. 10.1016/j.mtcomm.2020.10173210.1016/j.mtcomm.2020.101732 ↗
47. 10.2174/240546150666621042013362010.2174/2405461506666210420133620 ↗
48. 10.1016/S0921-5093(00)01989-410.1016/S0921-5093(00)01989-4 ↗
49. 10.1007/s43452-022-00428-210.1007/s43452-022-00428-2 ↗
50. 10.1016/j.matchar.2023.11351210.1016/j.matchar.2023.113512 ↗
51. 10.17516/1999-494X-2015-8-5-636-64510.17516/1999-494X-2015-8-5-636-645 ↗
52. 10.1016/j.jmrt.2022.07.13110.1016/j.jmrt.2022.07.131 ↗
53. 10.1016/j.matchar.2014.07.02410.1016/j.matchar.2014.07.024 ↗
54. 10.1016/j.matchemphys.2003.09.01610.1016/j.matchemphys.2003.09.016 ↗
55. 10.1016/j.matchar.2017.11.03210.1016/j.matchar.2017.11.032 ↗
56. 10.1016/j.jmatprotec.2017.01.01110.1016/j.jmatprotec.2017.01.011 ↗
57. 10.1016/S0921-5093(96)10880-710.1016/S0921-5093(96)10880-7 ↗
58. Inoue T. Strain variations on rolling condition in accumulative roll-bonding by finite element analysis. IntechOpen 2010: 589–610. doi:https://doi.org/10.5772/10233
59. 10.2320/matertrans.M200917910.2320/matertrans.M2009179 ↗
60. 10.1007/s11223-023-00570-z10.1007/s11223-023-00570-z ↗
61. 10.1016/j.matdes.2022.11086910.1016/j.matdes.2022.110869 ↗
62. 10.1016/j.matdes.2016.12.07010.1016/j.matdes.2016.12.070 ↗
63. 10.1016/j.msea.2021.14170410.1016/j.msea.2021.141704 ↗
64. 10.3390/met908088010.3390/met9080880 ↗
65. 10.1016/0001-6160(84)90086-510.1016/0001-6160(84)90086-5 ↗
66. 10.1016/j.istruc.2024.10644710.1016/j.istruc.2024.106447 ↗
67. 10.1016/j.ijmecsci.2022.10808710.1016/j.ijmecsci.2022.108087 ↗
68. 10.1007/s42114-022-00522-210.1007/s42114-022-00522-2 ↗
69. 10.1016/j.mtadv.2024.10053010.1016/j.mtadv.2024.100530 ↗
70. 10.1016/j.actamat.2007.06.00310.1016/j.actamat.2007.06.003 ↗
71. 10.1007/s11661-005-0006-610.1007/s11661-005-0006-6 ↗
72. 10.1016/j.msea.2024.14743310.1016/j.msea.2024.147433 ↗
73. 10.1016/j.msea.2022.14426410.1016/j.msea.2022.144264 ↗
74. 10.1016/j.msea.2024.14688810.1016/j.msea.2024.146888 ↗
75. 10.1557/s43577-024-00720-x10.1557/s43577-024-00720-x ↗
76. 10.1016/j.matchar.2023.11277310.1016/j.matchar.2023.112773 ↗
77. 10.1016/j.msea.2024.14647410.1016/j.msea.2024.146474 ↗
78. 10.1016/j.matchar.2018.01.05510.1016/j.matchar.2018.01.055 ↗
79. 10.1016/j.compositesb.2023.11116510.1016/j.compositesb.2023.111165 ↗
80. 10.1016/j.msea.2024.14662310.1016/j.msea.2024.146623 ↗
81. 10.3389/fmats.2023.113540710.3389/fmats.2023.1135407 ↗
82. Bhanuprakash L, Manikandan N, Varghese L, et al. Study on aluminium metal matrix composites reinforced with SiC and granite powder. Materials Today: Proceedings 2023.
83. 10.1016/j.msea.2023.14515210.1016/j.msea.2023.145152 ↗
84. 10.1016/j.fusengdes.2025.11480210.1016/j.fusengdes.2025.114802 ↗
85. 10.1016/j.ijimpeng.2023.10454210.1016/j.ijimpeng.2023.104542 ↗
86. 10.1007/s11665-023-08535-810.1007/s11665-023-08535-8 ↗
87. 10.1007/s00170-013-4899-810.1007/s00170-013-4899-8 ↗
88. 10.1007/s11666-024-01864-710.1007/s11666-024-01864-7 ↗
89. 10.1016/S0921-5093(99)00752-210.1016/S0921-5093(99)00752-2 ↗