Effect of direct ageing on the microstructure, tensile properties and fracture behavior of a Re-bearing polycrystalline nickel-based superalloy
Source abstract
Abstract
The effect of post-forging heat treatment on the microstructure and tensile properties of the heavily alloyed nickel-based superalloy SDZhS-15 (Ni-37(Co,Cr,Mo,W,Re)-12.5(Al,Ti,Nb,Ta)-0.17(B,C,La,Y,Ce), wt.%)) intended for disc applications at temperatures up to 850 °C was studied. The as-cast superalloy was subjected to homogenization, subsolvus hot forging, and various heat treatments, including either solution treatment at subsolvus temperature and ageing or direct ageing. The tensile tests showed that the strength/ductility combination at T = 20–850 °C was appreciably better in the fine-grained condition. SEM study revealed that the fraction of intergranular brittle cleavage fracture increased with increasing the test temperature and at transition from the fine-grained condition obtained via direct ageing to the coarse-grained one obtained via solution heat treatment and ageing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Metals Superplasticity Problems, Russian Academy of Sciences
Funding
Ministry of Science and Higher Education of the Russian Federation
References (55)
Show source-provided references
1. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
2. 10.31399/asm.tb.stg2.t6128033910.31399/asm.tb.stg2.t61280339 ↗
3. 10.4028/www.scientific.net/MSF.546-549.127710.4028/www.scientific.net/MSF.546-549.1277 ↗
4. 10.1016/j.proeng.2013.03.25110.1016/j.proeng.2013.03.251 ↗
5. 10.1016/j.proeng.2013.03.25010.1016/j.proeng.2013.03.250 ↗
6. 10.1179/174328408X37205610.1179/174328408X372056 ↗
7. 10.1080/02670836.2019.163372610.1080/02670836.2019.1633726 ↗
8. 10.3390/met1012160610.3390/met10121606 ↗
9. 10.3390/met1306111010.3390/met13061110 ↗
10. 10.1016/j.jmst.2023.01.06010.1016/j.jmst.2023.01.060 ↗
11. 10.1051/matecconf/2014140100110.1051/matecconf/20141401001 ↗
12. 10.1016/j.msea.2008.01.02310.1016/j.msea.2008.01.023 ↗
13. 10.1016/j.matchar.2012.05.00110.1016/j.matchar.2012.05.001 ↗
14. Mourer DP Huron ES Backman DG et al. Ni based superalloy and its use as gas turbine disks shafts and impellers. Patent EP No. 1195446 A1 4 October 2000.
15. Mourer DP Huron ES Bain KR et al. Superalloy optimized for high-temperature performance in high-pressure turbine disks. Patent US No. 6 521 175 B1 18 February 2003.
16. 10.22226/2410-3535-2022-4-457-46210.22226/2410-3535-2022-4-457-462 ↗
17. Rae CMF, Karunaratne MSA, Small CJ, et al. Topologically close packed phases in an experimental rhenium-containing single crystal superalloy. Superalloys 2000; Champion, Pennsylvania, USA, 2000: 767–776.
18. 10.1016/S1359-6454(01)00265-810.1016/S1359-6454(01)00265-8 ↗
19. 10.1016/j.msea.2010.05.02710.1016/j.msea.2010.05.027 ↗
20. 10.1016/j.matdes.2023.11258210.1016/j.matdes.2023.112582 ↗
21. 10.1007/s11837-999-0007-910.1007/s11837-999-0007-9 ↗
22. Antolovich B Germidis A Keefe P et al. Practical aspects of converting ingot to billet Metalworking: Bulk Forming. ASM Handbook 14A Edited by Semiatin S.L. ASM International. 2005; 227–237. https://doi.org/10.31399/asm.hb.v14a.a0003989.10.31399/asm.hb.v14a.a0003989 ↗
23. Kaibyshev OA, Utyashev FZ. Superplasticity: Microstructural refinement and superplastic roll forming. Arlington, Virginia: Futurepast, 2005.
24. 10.1007/s11665-020-05135-810.1007/s11665-020-05135-8 ↗
25. Zainullin I, Mukhtarov K, Ganeev A, et al. Effect of hot forging on formation of a fine-grained structure and mechanical properties of a powder metallurgy nickel base superalloy. Lett Mater 2023; 13: 414–419.
26. 10.22226/2410-3535-2021-1-61-6610.22226/2410-3535-2021-1-61-66 ↗
27. 10.1016/j.actamat.2018.06.03410.1016/j.actamat.2018.06.034 ↗
28. Horvath W Zechner W Tockner J et al. The effectiveness of direct aging on Inconel 718 forgings produced at high strain rates as obtained on a screw press. Superalloys 718 625 706 and Various Derivatives. Pittsburgh Pennsylvania USA 2001; 223–228. https://doi.org/10.7449/2001/Superalloys_2001_223_228.10.7449/2001/Superalloys_2001_223_228 ↗
29. Li JR Zhong ZG Tang DZ et al. A low-cost second generation single crystal superalloy DD6. Superalloys 2000. Champion Pennsylvania USA 2000; 777–783. https://doi.org/10.7449/2000/Superalloys_2000_777_783.10.7449/2000/Superalloys_2000_777_783 ↗
30. 10.1016/S1000-9361(09)60244-210.1016/S1000-9361(09)60244-2 ↗
31. 10.1046/j.1365-2818.1999.00578.x10.1046/j.1365-2818.1999.00578.x ↗
32. 10.1016/S0921-5093(98)00867-310.1016/S0921-5093(98)00867-3 ↗
33. 10.30544/7810.30544/78 ↗
34. Sims CT Stoloff NS Hagel WC. Superalloys II: High-Temperature Materials for Aerospace and Industrial Power. Wiley. 1987. ISBN: 978-0-471-01147-7.
35. 10.1016/j.jmst.2021.03.02210.1016/j.jmst.2021.03.022 ↗
36. 10.1016/j.actamat.2016.08.03510.1016/j.actamat.2016.08.035 ↗
37. 10.1007/s11661-018-4671-710.1007/s11661-018-4671-7 ↗
38. Huron ES Heaney JA Utah DA et al. Method of controlling and refining final grain size in supersolvus heat treated nickel-base superalloys Patent EP 2019150 A1 28.01.2009.
39. 10.1016/j.matchar.2022.11199410.1016/j.matchar.2022.111994 ↗
40. 10.1080/02670836.2020.185267910.1080/02670836.2020.1852679 ↗
41. 10.1007/BF0267032610.1007/BF02670326 ↗
42. 10.1007/s11661-021-06524-x10.1007/s11661-021-06524-x ↗
43. Rice D Kantzos P Hann B et al. P/M Alloy 10 - a 700(C capable nickel-based superalloy for turbine disk applications. Superalloys 2008. Champion Pennsylvania USA 2008; 139–147. https://doi.org/10.7449/2008/Superalloys_2008_139_147.10.7449/2008/Superalloys_2008_139_147 ↗
44. Gu Y Cui C Harada H et al. Development of Ni-Co-base alloys for high - temperature disk applications. Superalloys 2008. Champion Pennsylvania USA 2008; 53–61. https://doi.org/10.7449/2008/Superalloys_2008_53_61.10.7449/2008/Superalloys_2008_53_61 ↗
45. Gabb TP Gayda J Telesman J et al. Thermal and Mechanical Property Characterization of the Advanced Disk Alloy LSHR. NASA / TM-2005-213645 2005. 81 p.
46. Mitchell RJ, Lemsky JA, Ramanathan R, et al. Process development & microstructure & mechanical property evaluation of a dual microstructure heat treated advanced nickel disc alloy. Superalloys 2008; 2008: 347–356.
47. 10.1016/j.ijplas.2013.08.00910.1016/j.ijplas.2013.08.009 ↗
48. 10.1016/j.jallcom.2013.01.01110.1016/j.jallcom.2013.01.011 ↗
49. 10.7449/2004/Superalloys_2004_323_32910.7449/2004/Superalloys_2004_323_329 ↗
50. 10.1016/j.ijfatigue.2013.07.01410.1016/j.ijfatigue.2013.07.014 ↗
51. 10.1088/1757-899X/452/2/02212310.1088/1757-899X/452/2/022123 ↗
52. 10.1016/j.ijfatigue.2023.10764710.1016/j.ijfatigue.2023.107647 ↗
53. Gabb TP Telesman J Kantzos PT et al. Characterization of the temperature capabilities of advanced disk alloy ME3. NASA / TM-2002-211796. 2002. 51 p.
54. 10.3390/met1211197310.3390/met12111973 ↗
55. 10.1007/s11661-012-1146-010.1007/s11661-012-1146-0 ↗