Microstructural evolution and mechanical behaviour of Nb–10Hf–15W alloy doped with Si
Source abstract
Abstract
The microstructural evolution and mechanical properties of Nb–10Hf–15W–(0/1/3/5)Si (at.-%) alloys were investigated. The as-cast 0Si and 1Si alloys had a single Nb solid solution (Nb SS ) phase, while the 3Si and 5Si alloys consisted of Nb SS matrix and the eutectic of Nb SS plus Nb 3 Si. After heat treatment, the microstructure contained primary Nb SS and Nb SS + α-Nb 5 Si 3 eutectoid in 3Si and 5Si alloys. Fracture toughness of as-cast and heat-treated samples at room temperature monolithically decreased with increasing Si content. However, the α-Nb 5 Si 3 phase improved compressive strength of the Nb SS alloy at 1250 and 1350°C, with no degradation in the ductility or formability of the Nb SS /Nb 5 Si 3 microstructure. Finally, the failure mechanisms of the Nb SS /α-Nb 5 Si 3 microstructure at room and high temperatures were discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Aerospace Materials and Performance (Ministry of Education), School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing, People's Republic of China
Funding
National Natural Science Foundation of China · National Science and Technology
References (32)
Show source-provided references
1. Gergo PS · 2010
2. 10.1016/j.jnucmat.2004.10.11810.1016/j.jnucmat.2004.10.118 ↗
3. 10.1126/science.117932710.1126/science.1179327 ↗
4. 10.1038/nmat470910.1038/nmat4709 ↗
5. 10.2320/matertrans.45.49310.2320/matertrans.45.493 ↗
6. 10.1016/j.intermet.2015.12.00210.1016/j.intermet.2015.12.002 ↗
7. 10.1016/j.intermet.2018.07.01010.1016/j.intermet.2018.07.010 ↗
8. 10.1016/j.msea.2003.12.01010.1016/j.msea.2003.12.010 ↗
9. 10.1007/s11661-003-0187-910.1007/s11661-003-0187-9 ↗
10. 10.1007/BF0291440210.1007/BF02914402 ↗
11. 10.1007/BF0322136010.1007/BF03221360 ↗
12. 10.1007/BF0265733810.1007/BF02657338 ↗
13. 10.1007/BF0266737010.1007/BF02667370 ↗
14. 10.1007/BF0259562910.1007/BF02595629 ↗
15. 10.1007/s11661-003-0210-110.1007/s11661-003-0210-1 ↗
16. 10.1002/adma.1991003121510.1002/adma.19910031215 ↗
17. 10.1016/j.scriptamat.2010.02.02310.1016/j.scriptamat.2010.02.023 ↗
18. 10.1016/j.intermet.2014.10.01310.1016/j.intermet.2014.10.013 ↗
19. 10.1016/j.scriptamat.2010.12.00810.1016/j.scriptamat.2010.12.008 ↗
20. 10.1016/j.ijrmhm.2011.07.00910.1016/j.ijrmhm.2011.07.009 ↗
21. 10.1016/S0921-5093(01)01502-710.1016/S0921-5093(01)01502-7 ↗
22. 10.1007/s11661-014-2423-x10.1007/s11661-014-2423-x ↗
23. 10.1007/BF0266385010.1007/BF02663850 ↗
24. 10.1557/PROC-646-N5.39.110.1557/PROC-646-N5.39.1 ↗
25. 10.1007/s11661-014-2378-y10.1007/s11661-014-2378-y ↗
26. 10.1007/BF0267368210.1007/BF02673682 ↗
27. 10.1016/0001-6160(89)90069-210.1016/0001-6160(89)90069-2 ↗
28. 10.1016/j.pnsc.2018.09.00110.1016/j.pnsc.2018.09.001 ↗
29. 10.1007/BF0281530510.1007/BF02815305 ↗
30. 10.1016/0022-5096(68)90021-510.1016/0022-5096(68)90021-5 ↗
31. 10.1007/s11661-999-0234-210.1007/s11661-999-0234-2 ↗
32. Zhang W. Effect of grain refinement and alloying on the microstructure and room temperature fracture toughness of Nb-Si alloy (master degree dissertation). Beijing, China: Beihang University; 2018, p. 12.