Superelasticity with excellent temperature stability in Cu-Al-Mn shape memory alloy by gradient high temperature rolling
Source abstract
Abstract
The objective was to enhance the temperature stability of Cu-Al-Mn shape memory alloys (SMAs) across a wide temperature range. To this end, a gradient rolling treatment at 800 °C (HR) and subsequent heat treatment (HT) were employed to create a gradient texture. The objective was to control and reduce the temperature dependence of superelasticity properties, including superelastic stress ( σ M ), austenite transformation stress ( σ A ), damping coefficient ( tanΦ ), and so forth, in columnar-grained Cu-Al-Mn SMAs. The results demonstrated that the temperature dependence rate of stress-induced martensitic transformation stress ( σ M ) initially increased and then decreased with the reduction in gradient range in the RD direction. The dσ M /d T value for HRT-65/68 was 0.369 MPa/K. In the TD direction, the dσ M /d T of HRT-60V was only 0.232 MPa/K over a wide range of temperatures, approximately 120 K. The excellent superelastic temperature stability observed in this gradient structure Cu-Al-Mn SMA was superior to that of other reported Cu-Al-Mn SMAs and NiTi SMAs. Following gradient rolling treatment, the alloy retained a strong <001>-oriented texture along the RD direction. However, the strength of this texture was reduced, resulting in the formation of non-high phase transition strain orientation and grains with a gradient size distribution. These characteristics contributed to the development of high superelasticity with excellent temperature stability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Wuhan University of Technology
R & D Center of Wuhan Iron & Steel Co., Ltd, Baosteel Central Research Institute, Wuhan, China
Science and Technology Institute of Advanced Technology, Wuhan, China
Funding
Guangxi Key Laboratory of Information Materials · National Natural Science Foundation of China
References (34)
Show source-provided references
1. 10.1016/j.matdes.2013.11.08410.1016/j.matdes.2013.11.084 ↗
2. 10.1016/0079-6425(93)90005-610.1016/0079-6425(93)90005-6 ↗
3. 10.1016/j.actamat.2018.11.03510.1016/j.actamat.2018.11.035 ↗
4. 10.1016/j.actamat.2019.05.02710.1016/j.actamat.2019.05.027 ↗
5. 10.1088/1757-899X/229/1/01202110.1088/1757-899X/229/1/012021 ↗
6. 10.1016/j.scriptamat.2018.02.03910.1016/j.scriptamat.2018.02.039 ↗
7. 10.1038/ncomms458010.1038/ncomms4580 ↗
8. 10.1016/j.msea.2017.11.10710.1016/j.msea.2017.11.107 ↗
9. 10.1016/j.msea.2021.14198010.1016/j.msea.2021.141980 ↗
10. 10.1016/j.matlet.2023.13421410.1016/j.matlet.2023.134214 ↗
11. 10.1016/j.msea.2017.04.08510.1016/j.msea.2017.04.085 ↗
12. Maalolan B, Santosh S. A review on CuAlNi shape memory alloys: production methods, applications and current trends. Mater Today: Proc 2023. https://doi.org/10.1016/j.matpr.2024.03.026
13. 10.1016/j.jallcom.2022.16625810.1016/j.jallcom.2022.166258 ↗
14. 10.1016/j.jallcom.2018.06.25010.1016/j.jallcom.2018.06.250 ↗
15. 10.1016/j.actamat.2005.05.01310.1016/j.actamat.2005.05.013 ↗
16. 10.1016/j.matdes.2014.07.07010.1016/j.matdes.2014.07.070 ↗
17. 10.1063/1.481264310.1063/1.4812643 ↗
18. 10.1016/j.scriptamat.2012.11.04210.1016/j.scriptamat.2012.11.042 ↗
19. 10.1016/j.actamat.2009.08.01110.1016/j.actamat.2009.08.011 ↗
20. 10.1016/S1359-6462(03)00470-610.1016/S1359-6462(03)00470-6 ↗
21. 10.1126/science.120223210.1126/science.1202232 ↗
22. 10.1016/j.actamat.2010.11.00810.1016/j.actamat.2010.11.008 ↗
23. 10.1016/j.jallcom.2020.15426510.1016/j.jallcom.2020.154265 ↗
24. 10.2320/matertrans.45.244310.2320/matertrans.45.2443 ↗
25. 10.1016/j.jallcom.2020.15616110.1016/j.jallcom.2020.156161 ↗
26. 10.1016/j.actamat.2015.03.02210.1016/j.actamat.2015.03.022 ↗
27. 10.1016/0001-6160(76)90071-710.1016/0001-6160(76)90071-7 ↗
28. 10.1007/s11661-002-0267-210.1007/s11661-002-0267-2 ↗
29. 10.1063/1.496462110.1063/1.4964621 ↗
30. 10.1016/j.jallcom.2019.15321310.1016/j.jallcom.2019.153213 ↗
31. 10.1016/j.msea.2023.14492510.1016/j.msea.2023.144925 ↗
32. 10.1016/j.jmatprotec.2024.11842210.1016/j.jmatprotec.2024.118422 ↗
33. 10.1103/PhysRev.71.53310.1103/PhysRev.71.533 ↗
34. 10.1016/j.jma.2019.05.00310.1016/j.jma.2019.05.003 ↗