journal article·2023-11

Application of ultrafast heating and tempering to plate steel

J. I. Carreno-Saavedra, T. Ros-Yanez, C. I. García, E. I. Hernández-Durán, R. A. Iquilio, F. M. Castro Cerda

Materials Science and Technology· Volume 39· Issue 16
Publisher page

Abstract

The microstructure and tensile properties were studied in a low-alloy steel plate treated under ultra-fast heating, quenching, and tempering. The microstructure after heat-treatments was predominantly martensite, with low fraction of bainite and ferrite. The tensile tests showed a 100 MPa improvement in strength and a doubling of the total elongation with the increase in heating rate. The tempering process considerably enhanced the ductility from 1–4% to up to 14% in the samples treated at fast heating rates..Furthermore, the work hardening capacity of ultra-fast heated steel was superior compared to steel treated under conventional quenching and tempering. The results suggest that the tempering stage after ultra-fast heat-treatments and quenching further improves the properties compared to the standard quenched and tempered condition.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Laser and Thermal Forming Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgy, University of Santiago de Chile, Santiago, Chile

Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA, USA

Department of Electromechanical, Systems & Metal Engineering, Research Group Materials Science and Technology, Ghent University, Zwijnaarde, Belgium

Cleveland-Cliffs Inc. Research & Innovation Center, Middletown, OH, USA

Escuela de Ingeniería Mecánica, Pontificia Universidad Católica de Valparaíso, Valparaíso, Chile

Funding

National Research and Development Agency of Chile · ANID · Dicyt-Usach · Agencia Nacional de Investigación y Desarrollo

References (31)

Show source-provided references
1. 10.3390/met903031210.3390/met9030312 ↗
2. 10.1179/174328409X43381310.1179/174328409X433813 ↗
3. Matlock D · Mater Charact · 2020 · 166 · 110
4. 10.1016/j.msea.2018.12.03610.1016/j.msea.2018.12.036 ↗
5. 10.1016/j.matdes.2014.01.05510.1016/j.matdes.2014.01.055 ↗
6. 10.1016/j.msea.2016.06.05610.1016/j.msea.2016.06.056 ↗
7. 10.1016/j.jallcom.2014.06.07510.1016/j.jallcom.2014.06.075 ↗
8. 10.1016/S1006-706X(16)30025-510.1016/S1006-706X(16)30025-5 ↗
9. 10.3390/met905054510.3390/met9050545 ↗
10. 10.1016/j.mtcomm.2020.10199410.1016/j.mtcomm.2020.101994 ↗
11. 10.3390/met612032110.3390/met6120321 ↗
12. Hernández-Durán E. · 2021
13. Barrows R. · 2014
14. 10.4028/www.scientific.net/SSP.160.6310.4028/www.scientific.net/SSP.160.63 ↗
15. 10.1007/s11661-016-3462-210.1007/s11661-016-3462-2 ↗
16. 10.1007/s11661-018-4904-910.1007/s11661-018-4904-9 ↗
17. 10.1007/s11661-016-3903-y10.1007/s11661-016-3903-y ↗
18. 10.1016/B978-0-08-100270-4.00009-310.1016/B978-0-08-100270-4.00009-3 ↗
19. Vander-Voor GF. Etching isothermally treated steels. Buehler Ltd. Lake Bluff, lll. Heat Treating Progress. 2001 April/May; 1: 25–32.
20. 10.1016/B978-0-12-818981-8.00012-610.1016/B978-0-12-818981-8.00012-6 ↗
21. 10.1533/9780857096104.4.58110.1533/9780857096104.4.581 ↗
22. 10.1016/S0921-5093(02)00632-910.1016/S0921-5093(02)00632-9 ↗
23. 10.1016/j.msea.2014.12.11810.1016/j.msea.2014.12.118 ↗
24. 10.1016/j.matdes.2016.12.00910.1016/j.matdes.2016.12.009 ↗
25. 10.1016/S1359-6454(98)00210-910.1016/S1359-6454(98)00210-9 ↗
26. 10.1016/S1359-6462(99)00388-710.1016/S1359-6462(99)00388-7 ↗
27. 10.1016/S1359-6462(00)00535-210.1016/S1359-6462(00)00535-2 ↗
28. 10.1016/S1359-6462(00)00533-910.1016/S1359-6462(00)00533-9 ↗
29. 10.1016/j.wear.2019.20309810.1016/j.wear.2019.203098 ↗
30. 10.2355/isijinternational.55.111410.2355/isijinternational.55.1114 ↗
31. 10.1016/j.scriptamat.2015.05.03610.1016/j.scriptamat.2015.05.036 ↗