journal article·2022-11

Microstructure and mechanical properties of laser indirect brazed titanium/steel composite joint with a CuZn filler metal

Haoyuan Zeng, Deshui Yu, Yan Zhang, Jianping Zhou, Yankun Chen

Materials Science and Technology· Volume 38· Issue 16
Publisher page

Abstract

In this study, the research on the laser welding TC4 alloy and stainless steel dissimilar metals with composite welding mechanism was investigated. Dissimilar joints of TC4 alloy and stainless steel were generated by indirect laser brazing. Moreover, in order to further explored the bonding mechanism of joints, CuZn metal was used as the filler material to study the welding process of TC4 alloy and 304 stainless steel with indirect laser brazing and transition section. The filler was extruded into metal droplets due to the metal expansion during laser welding, which increased the tightness of the joint. With the increase of heat input, the reaction between the filler and the base metals on both sides was more intense. In addition, the tensile strength reached 210 MPa (41% of stainless steel) when the laser power was 624 W.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, State Key Laboratory for Manufacturing Systems Engineering, Xinjiang University, Wulumuqi, People's Republic of China

Funding

National Natural Science Foundation of China

References (40)

Show source-provided references
1. 10.1016/0001-6160(69)90131-X10.1016/0001-6160(69)90131-X ↗
2. Bhanumurthy K · Mater Trans · 1990 · 21 · 2897
3. Bi YB · Mater Lett · 2020 · 285 · 129072
4. 10.1016/j.matdes.2016.08.01810.1016/j.matdes.2016.08.018 ↗
5. 10.1134/S086986431502001810.1134/S0869864315020018 ↗
6. Dorfman S · Phys J · 1998 · 3 · 175
7. 10.1016/S0925-8388(99)00124-310.1016/S0925-8388(99)00124-3 ↗
8. Gao YD · North-Holland · 2019 · 255 · 126521
9. 10.1016/j.proeng.2014.10.21610.1016/j.proeng.2014.10.216 ↗
10. 10.1016/S0966-9795(98)00139-310.1016/S0966-9795(98)00139-3 ↗
11. 10.1080/0950711020954958710.1080/09507110209549587 ↗
12. 10.1016/j.optlastec.2018.11.02210.1016/j.optlastec.2018.11.022 ↗
13. 10.1016/j.msea.2021.14184310.1016/j.msea.2021.141843 ↗
14. He P · Trans China Weld Inst · 2002 · 23 · 80
15. He P · Trans China Weld Inst · 2000 · 21 · 75
16. He K · 1986
17. 10.1016/j.msea.2005.10.04710.1016/j.msea.2005.10.047 ↗
18. Liu P. · 2006
19. Li Y · Trans China Weld Inst · 2005 · 26 · 4144
20. 10.1007/s40195-016-0371-810.1007/s40195-016-0371-8 ↗
21. Lin ZR. · 1990
22. 10.1007/BF0266556910.1007/BF02665569 ↗
23. 10.1016/0956-7151(90)90020-H10.1016/0956-7151(90)90020-H ↗
24. Shi C · 2004
25. 10.1023/A:101166821646710.1023/A:1011668216467 ↗
26. Shewmon PG. · 1989
27. 10.1016/j.fusengdes.2005.08.06910.1016/j.fusengdes.2005.08.069 ↗
28. 10.1016/j.msea.2014.10.08410.1016/j.msea.2014.10.084 ↗
29. 10.1016/0956-7151(90)90019-D10.1016/0956-7151(90)90019-D ↗
30. Venkatesh S · Mater Today: Proceedings · 2020 · 11 · 427
31. 10.1016/S1003-6326(09)60381-210.1016/S1003-6326(09)60381-2 ↗
32. William FS. · 2003
33. Xia L · 1989
34. 10.1016/j.jmatprotec.2018.06.00910.1016/j.jmatprotec.2018.06.009 ↗
35. 10.1016/j.jmrt.2019.11.06610.1016/j.jmrt.2019.11.066 ↗
36. 10.1016/j.matlet.2018.08.01410.1016/j.matlet.2018.08.014 ↗
37. 10.1016/j.optlastec.2019.10595710.1016/j.optlastec.2019.105957 ↗
38. 10.1016/j.optlastec.2020.10619510.1016/j.optlastec.2020.106195 ↗
39. 10.1016/j.jmrt.2019.10.07510.1016/j.jmrt.2019.10.075 ↗
40. 10.1016/j.jmatprotec.2020.11690910.1016/j.jmatprotec.2020.116909 ↗