journal article·2020-03

Comparative study on microstructures and properties of Mn-containing and Mn-free bainitic steels

Xiaoyan Long, Ruijie Zhang, Fucheng Zhang, Ming Zhang

Materials Science and Technology· Volume 36· Issue 4
Publisher page

Abstract

The effects of Mn on the microstructure and impact-abrasion wear resistance of bainitic steel were studied. Results showed that the Mn-containing steel possessed finer microstructure and higher volume fraction of retained austenite, in comparison with the Mn-free steel. This was caused by lower transformation temperature and higher strength of undercooled austenite. The weight loss of Mn-free steel varying with the impact load was larger than that of Mn-containing steel. High strength, hardness and toughness of Mn-containing steel were conducive to improving wear resistance. More retained austenite in Mn-containing steel played an active role in work hardening and hindering crack propagation. However, the portion of retained austenite that induced martensitic transformation was the same with increasing impact-wear load.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, People's Republic of China

Key Laboratory of Mechanical Reliability for Heavy Equipments and Large Structures of Hebei Province, Yanshan University, Qinhuangdao, People's Republic of China

National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao, People's Republic of China

Funding

Doctoral Foundation of Yanshan University · Natural Science Foundation of China · Postgraduate Innovation Funding Project of Hebei Province · Postdoctoral Research Projects

References (34)

Show source-provided references
1. Solano-Alvarez W Pickering EJ Peet MJ Soft novel form of white-etching matter and ductile failure of carbide-free bainitic steels under rolling contact stresses. Acta Mater. 2016; 121:215–226. doi:10.1016/j.actamat.2016.09.012.10.1016/j.actamat.2016.09.012 ↗
2. Zhao X Zhang F Yang Z Cyclic deformation behavior and microstructure evolution of high-carbon nano-bainitic steel at different tempering temperatures. Mater Sci Eng: A. 2019; 751:323–331. doi:10.1016/j.msea.2019.02.070.10.1016/j.msea.2019.02.070 ↗
3. Zhang P Zhang FC Wang TS. Preparation and microstructure characteristics of low-temperature bainite in surface layer of low carbon gear steel. Appl Surf Sci. 2011; 257:7609–7614. doi:10.1016/j.apsusc.2011.03.138.10.1016/j.apsusc.2011.03.138 ↗
4. Zhang FC Yang ZN Kang J. Research progress of bainitic steel used for railway crossing. J Yanshan Univ. 2013; 37:1–7. doi:10.3969/j.issn.1007-791X.2013.01.001.
5. 10.1016/B978-075068084-4/50008-X10.1016/B978-075068084-4/50008-X ↗
6. Yang ZN, Zhao XJ, Zhang FC. Review on the methods of accelerating bainite phase transition. J Yanshan Univ. 2018; 42:471–478.
7. Soliman M Palkowski H. Development of the low temperature bainite. Arch Civ Mech Eng. 2016; 16:403–412. doi:10.1016/j.acme.2016.02.007.10.1016/j.acme.2016.02.007 ↗
8. Liu SK Zhang J. The influence of the Si and Mn concentrations on the kinetics of the bainite transformation in Fe-C-Si-Mn alloys. Metall Trans A. 1990; 24:1517–1525. doi:10.1007/bf02672566.10.1007/BF02672566 ↗
9. Huang H Sherif MY Rivera-Díaz-Del-Castillo PEJ. Combinatorial optimization of carbide-free bainitic nanostructures. Acta Mater. 2013; 61:1639–1647. doi:10.1016/j.actamat.2012.11.040.10.1016/j.actamat.2012.11.040 ↗
10. Changle Z Hanguang F Shengqiang M Effect of Mn content on microstructure and properties of wear-resistant bainitic steel. Mater Res Express. 2019; 6:086581. doi:10.1088/2053-1591/ab1c8d.10.1088/2053-1591/ab1c8d ↗
11. Long XY Zhang FC Zhang CY. Effect of Mn content on low-cycle fatigue behaviors of low-carbon bainitic steel. Mater Sci Eng: A. 2017; 697:111–118. doi:10.1016/j.msea.2017.04.089.10.1016/j.msea.2017.04.089 ↗
12. Amel-Farzad H Faridi HR Rajabpour F Developing very hard nanostructured bainitic steel. Mater Sci Eng: A. 2013; 559:68–73. doi:10.1016/j.msea.2012.08.020.10.1016/j.msea.2012.08.020 ↗
13. Bakshi SD Leiro A Prakash B Dry rolling/sliding wear of nanostructured bainite. Wear. 2014; 316:70–78. doi:10.1016/j.wear.2014.04.020.10.1016/j.wear.2014.04.020 ↗
14. Leiro A Vuorinen E Sundin KG Wear of nano-structured carbide-free bainitic steels under dry rolling–sliding conditions. Wear. 2013; 298–299:42–47. doi:10.1016/j.wear.2012.11.064.10.1016/j.wear.2012.11.064 ↗
15. 10.1016/S0043-1648(99)00042-310.1016/S0043-1648(99)00042-3 ↗
16. Sundström A José R Olsson M. Wear behaviour of some low alloyed steels under combined impact/abrasion contact conditions. Wear. 2001; 250:744–754. doi:10.1016/s0043-1648(01)00712-8.10.1016/S0043-1648(01)00712-8 ↗
17. Chintha AR. Metallurgical aspects of steels designed to resist abrasion and impact-abrasion wear. Mater Sci Technol. 2019; 35:1133–1148. doi:10.1080/02670836.2019.1615669.10.1080/02670836.2019.1615669 ↗
18. Glazkov VM Novomeiskii YD Savitskii KV. Nature of resistance to abrasive wear. Sov Phys J. 1969; 12:1441–1444. doi:10.1007/BF00838299.10.1007/BF00838299 ↗
19. Shah M Bakshi SD. Three-body abrasive wear of carbide-free bainite martensite and bainite-martensite structure of similar hardness. Wear. 2018; 402–403:207–215. doi:10.1016/j.wear.2018.02.020.10.1016/j.wear.2018.02.020 ↗
20. Vuorinen E Ojala N Heino V Erosive and abrasive wear performance of carbide free bainitic steels – comparison of field and laboratory experiments. Tribol Int. 2016; 98:108–115. doi:10.1016/j.triboint.2016.02.015.10.1016/j.triboint.2016.02.015 ↗
21. Long XY Zhang FC Kang J Study on carbide-bearing and carbide-free bainitic steels and their wear resistance. Mater Sci Technol. 2017; 33:615–622. doi:10.1080/02670836.2016.1242205.10.1080/02670836.2016.1242205 ↗
22. Liu B Li W Lu X The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels. Wear. 2019; 428–429:127–136. doi:10.1016/j.wear.2019.02.032.10.1016/j.wear.2019.02.032 ↗
23. Liu B Li W Lu X An integrated model of impact-abrasive wear in bainitic steels containing retained austenite. Wear. 2019; 440–441:203088. doi:10.1016/j.wear.2019.203088.10.1016/j.wear.2019.203088 ↗
24. De AK Murdock DC Mataya MC Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction. Scr Mater. 2004; 50:1445–1449. doi:10.1016/j.scriptamat.2004.03.011.10.1016/j.scriptamat.2004.03.011 ↗
25. Xu L Wei S Xiao F Effects of carbides on abrasive wear properties and failure behaviours of high speed steels with different alloy element content. Wear. 2017; 376–377:968–974. doi:10.1016/j.wear.2017.01.021.10.1016/j.wear.2017.01.021 ↗
26. Yang Z Chu C Jiang F Accelerating nano-bainite transformation based on a new constructed microstructural predicting model. Mater Sci Eng: A. 2019; 748:16–20. doi:10.1016/j.msea.2019.01.061.10.1016/j.msea.2019.01.061 ↗
27. Xia Y Miyamoto G Yang ZG Direct measurement of carbon enrichment in the incomplete bainite transformation in Mo added low carbon steels. Acta Mater. 2015; 91:10–18. doi:10.1016/j.actamat.2015.03.021.10.1016/j.actamat.2015.03.021 ↗
28. 10.1016/j.matdes.2015.06.17210.1016/j.matdes.2015.06.172 ↗
29. Bhadeshia HKDH. Bainite in steels. 3rd ed. Leeds, UK: Maney Publishing; 2015.
30. Long X Zhang F Yang Z Study on microstructures and properties of carbide-free and carbide-bearing bainitic steels. Mater Sci Eng: A. 2018; 715:10–16. doi:10.1016/j.msea.2017.12.108.10.1016/j.msea.2017.12.108 ↗
31. Kumar A Singh A. Toughness dependence of nano-bainite on phase fraction and morphology. Mater Sci Eng: A. 2018; 729:439–443. doi:10.1016/j.msea.2018.05.106.10.1016/j.msea.2018.05.106 ↗
32. Sheng ZQ, Song BL, Wei SC. Influence of impact energy on 8Mn-2Cr-Si steel abrasive-wear properties. J Northeastern Univ Nat Sci. 2018; 39:211–215.
33. Sun GD, Liu CH. Study on impact and abrasion echanism of ZGMnl3 and ZGMnl8 under different impact energy. Hot Working Technol. 2016; 4:96–98.
34. Long X Zhang R Zhang F Study on quasi-in-situ tensile deformation behavior in medium-carbon carbide-free bainitic steel. Mater Sci Eng: A. 2019; 760:158–164. doi:10.1016/j.msea.2019.05.112.10.1016/j.msea.2019.05.112 ↗