journal article·2025-08

Effect of dislocation density on microstructure and mechanical properties of cold-rolled medium Mn steel

Jinbiao Wu, Cainian Jing, Tao Lin, Junjie Xu, Can Peng, Yingming Tu, Tinglin Fu, Bin Xuan

Materials Science and Technology· Volume 41· Issue 12
Publisher page

Abstract

This study investigated the effect of dislocation density on microstructural transformation and mechanical properties of Fe-7.23Mn-4.42Al-0.09C-1.99Si (wt.%) steel. By the tempering treatment, the dislocation density was reduced. The effect of of dislocation density on the plasticity of the steel was analyzed. The dislocation density was reduced from 2.3 × 10 −16 m −2 to 1.6 10 −16 m −2 by tempering. Reducing dislocation density in the metastable austenite resulted in a higher metastable austenite transformation rate. And the low dislocation density steels exhibited a longer strain length during tensile deformation. It was obvserved that the dislocation density of the test steel decreased by 30% after tempering, the austenite transformation rate increased to 53.3%, and tensile strength and elongation increased to 1010 MPa and 44% respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Shandong Jianzhu University, Jinan, 250101, China

Business Segment, Linqu County Inspection and Testing Center, Weifang, 262600, China

Business Segment, Qingdao West Coast New Area Development and Construction Limited, Qingdao, 266000, China

References (34)

Show source-provided references
1. Sun B, Kwiatkowski da Silva A, Wu Y, et al. Physical metallurgy of medium-Mn advanced high-strength steels. Int Mater Rev 2022; 7: 786–924.
2. 10.1016/j.msea.2017.06.10710.1016/j.msea.2017.06.107 ↗
3. 10.2355/isijinternational.43.43810.2355/isijinternational.43.438 ↗
4. 10.1016/j.msea.2020.14002310.1016/j.msea.2020.140023 ↗
5. 10.1016/j.msea.2009.11.06310.1016/j.msea.2009.11.063 ↗
6. 10.1016/j.scriptamat.2018.05.01910.1016/j.scriptamat.2018.05.019 ↗
7. 10.1016/j.msea.2013.04.09610.1016/j.msea.2013.04.096 ↗
8. 10.1080/03019233.2022.209699210.1080/03019233.2022.2096992 ↗
9. 10.1016/0502-8205(58)90005-410.1016/0502-8205(58)90005-4 ↗
10. 10.1016/j.msea.2022.14446810.1016/j.msea.2022.144468 ↗
11. 10.1177/0267083623121261610.1177/02670836231212616 ↗
12. 10.1016/j.ijplas.2022.10333410.1016/j.ijplas.2022.103334 ↗
13. 10.1016/j.actamat.2023.11909910.1016/j.actamat.2023.119099 ↗
14. 10.1007/s10853-019-04337-310.1007/s10853-019-04337-3 ↗
15. 10.1007/s11665-022-07397-w10.1007/s11665-022-07397-w ↗
16. 10.1016/j.scriptamat.2016.12.02610.1016/j.scriptamat.2016.12.026 ↗
17. 10.1016/j.msea.2018.03.02310.1016/j.msea.2018.03.023 ↗
18. 10.1016/j.msea.2019.13823110.1016/j.msea.2019.138231 ↗
19. 10.1016/j.msea.2010.01.03310.1016/j.msea.2010.01.033 ↗
20. 10.1016/j.actamat.2016.09.04810.1016/j.actamat.2016.09.048 ↗
21. 10.1126/science.aan017710.1126/science.aan0177 ↗
22. 10.1080/03019233.2023.221609710.1080/03019233.2023.2216097 ↗
23. 10.1016/j.msea.2018.04.11510.1016/j.msea.2018.04.115 ↗
24. 10.1016/j.msea.2019.04.11210.1016/j.msea.2019.04.112 ↗
25. 10.1007/s11661-019-05222-z10.1007/s11661-019-05222-z ↗
26. 10.1016/j.actamat.2018.11.02910.1016/j.actamat.2018.11.029 ↗
27. 10.1016/j.msea.2022.14390410.1016/j.msea.2022.143904 ↗
28. 10.1002/adem.20170108310.1002/adem.201701083 ↗
29. 10.1016/j.actamat.2014.10.03210.1016/j.actamat.2014.10.032 ↗
30. 10.1016/j.msea.2015.07.08210.1016/j.msea.2015.07.082 ↗
31. 10.1016/j.matdes.2015.05.08510.1016/j.matdes.2015.05.085 ↗
32. 10.1002/srin.20220049210.1002/srin.202200492 ↗
33. 10.1088/2053-1591/ab3ee310.1088/2053-1591/ab3ee3 ↗
34. 10.1016/j.scriptamat.2010.04.02010.1016/j.scriptamat.2010.04.020 ↗