journal article·2012-02

Effect of residual chemical elements (Cr, Ni and Cu) on machinability of leaded low carbon free machining steels

M N Sousa, N Evangelista Luiz, D C de Oliveira, M A de Souza Barrozo, Á R Machado

Materials Science and Technology· Volume 28· Issue 2
Publisher page

Abstract

Free machining steels are specially designed to offer good results in machining operations by reducing the coefficient of friction with the tool. In general, these steels must meet tight specifications for other characteristics, such as mechanical strength, fatigue strength and wear resistance, among others. Therefore, the main alloying elements of which they are composed are destined to improve their machinability. These materials are usually low carbon steels with strong additions of S, Mn, Pb, P, etc. Because they are usually manufactured with recyclable materials, their compositions always contain elements such as Cr, Ni, Cu and Mo, which are considered residual elements. The present paper reports on an investigation of the influence of slight variations in Cu, Ni and Cr content on the machinability of leaded low carbon free machining steels based on the methodology described by the Volvo STD 1018-712 standard. The method is based on tool life tests of high speed steel single cutting tools applied in special conditions to the face milling process. The statistical analysis of the data was performed by analysis of variance and hypothesis testing. The results of the experiments demonstrated that residual chemical elements influence the machinability of SAE 12L14 steel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Metal Alloys Wear and Properties · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

LEPU/FEMEC/UFU, School of Mechanical Engineering, Federal University of Uberlândia, Uberlândia, Minas Gerais 38408-902, Brazil

GERDAU S.A., Pindamonhangaba, São Paulo 12442-260, Brazil

FEQUI/UFU, School of Chemical Engineering, Federal University of Uberlândia, Uberlândia, Minas Gerais 38408-902, Brazil

References (15)

Show source-provided references
1. 10.1016/B978-075067069-2/50007-310.1016/B978-075067069-2/50007-3 ↗
2. Apple CA: ‘The relationship between inclusionsand the machinability of steel’, Proc. 31stConf. on ‘Mechanical working and steel processing’, 415–426; 1989, Warrendale, PA, Iron and Steel Society, Inc.
3. Bas J: ‘A usinabilidade dos aços especiais(The machinability of special steels)’, Relatóriointerno (Internal report), Gerdau S.A., Charqueadas,RS, Brazil, 1995. In Portuguese.
4. 10.1243/09544054JEM86110.1243/09544054JEM861 ↗
5. Mill B, H Redford A: ‘Machinability of engineering materials’, 98–107; 1989, London, AppliedScience Publishers.
6. Echevarría E, Corcuera P: ‘Influencia de Los Elementos ResidualesEn La Maquinabilidad y El Corte de Los Aceros de Facil Maquinabilidad (Influenceof residual elements in the machinability of free-machining steels)’, PR-2/1,Agrupación I+D, Acenor Aceros Especiais, 1987. In Spanish.
7. Evangelista Luiz N: ‘Usinabilidade do Aço de CorteFácil Baixo Carbono ao Chumbo ABNT 12L14 com Diferentes Níveisde Elementos Químicos Residuais (Cromo, Níquel e Cobre) (Machinabilityof low carbon leaded free-machining steel ABNT 12L14, with different levelsof chemical residual elements (Cr, Ni and Cu)’, PhDthesis, FEMEC-UFU, Uberlândia,Brazil, 2007. In Portuguese.
8. Almeida MC: ‘Estudo do Efeito dos Elementos Residuais(Cr, Ni e Cu) na Usinabilidade do Aço-de-corte-fácil, SAE 12L14(Study of the effect of residual chemical elements (Cr, Ni and Cu) on themachinability of SAE 12L14 free-machining steel)’, MScdissertation, UNIFEI, Itajubá,Brazil, 2005. In Portuguese.
9. 10.1243/09544054JEM169410.1243/09544054JEM1694 ↗
10. ‘TheVolvo standard machinability test’, STD 1018-712,3rd edn, The Volvo Laboratory for ManufacturingResearch, Trollhattan, Sweden, 2003.
11. Box GE, Hunter WG, Hunter JS: ‘Statistics for experiments’; 1978, NewYork, John Wiley and Sons Inc.
12. DeArdo AJ, Garcia CI, Laible RM, Eriksson U: ‘A better way to assess machinability’, 33–35; 1993, New York, PentonPublishing.
13. Björkeborn K, Klement U, Oskarson HB: ‘Ranking of materials by their machinabilityapplying a short-term test’, Proc. 2nd Int.Conf. on ‘Innovative cutting processes and smart machining’, Cluny,France, October 2008, CIRP, 1–8.
14. Murphy DW, Aylward PT: ‘Machinability of steel’; 1971, NewYork, Gordon and Breach Science Publishers.
15. 10.1016/S0007-8506(07)60199-210.1016/S0007-8506(07)60199-2 ↗