journal article·2024-12

An optimisation of the internal roller burnishing process for magnesium composites using Taguchi Multi objective optimization method

KR. Arun prasad, M.R. Stalin John

Materials Science and Technology· Volume 40· Issue 17
Publisher page

Abstract

Machining Metal Matrix Composites with conventional metal removal causes particle debonding and crack propagation. This paper has given enhancing results for magnesium silicon carbide Metal Matrix Composite using an internal roller burnishing process. The optimal process parameters are obtained using a full factorial design and Taguchi Multi Response optimization. The optimized parameters include a spindle speed of 500 rpm, a feed rate of 0.5 mm/rev, and a stock allowance of 0.03 mm. The resulting surface characteristics comprise a surface roughness of 0.1555 µm, an out of roundness of 0.0595 mm, and a surface hardness of 66.9 HV. Scanning electron and atomic force microscope, images analyze the surface topology. Auto parts like transfer case and steering components can use burnished components.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Advanced machining processes and optimization · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur, Chengalpattu District, Tamil Nadu, India

References (33)

Show source-provided references
1. 10.1007/s00170-023-12630-410.1007/s00170-023-12630-4 ↗
2. Chen Z, Ding F, Zhang Z, et al. A review on machining SiCp/Al composite materials. Micromachines 2024; 15: 07.
3. Jagadeesh GV, Setti SG. A review on latest trends in ball and roller burnishing processes for enhancing surface finish. Adv Mater Process Technol 2022; 8: 4499–4523.
4. 10.1007/s00170-021-07454-z10.1007/s00170-021-07454-z ↗
5. 10.1016/j.jmrt.2020.05.03810.1016/j.jmrt.2020.05.038 ↗
6. 10.1007/s00170-020-05837-210.1007/s00170-020-05837-2 ↗
7. 10.1186/s10033-022-00828-810.1186/s10033-022-00828-8 ↗
8. 10.3390/machines1007056410.3390/machines10070564 ↗
9. 10.1177/095440542097666110.1177/0954405420976661 ↗
10. Arsalani M, Razfar MR, Abdullah A, et al. Fatigue behavior improvement of hardened parts using sequential hard turning, grinding, and ball burnishing operations. Proc Inst Mech Eng Part L J Mater Des Appl 2021; 235: 87–99.
11. 10.1016/j.jmapro.2023.10.04110.1016/j.jmapro.2023.10.041 ↗
12. 10.1186/s10033-021-00540-z10.1186/s10033-021-00540-z ↗
13. 10.1080/02670836.2022.214274410.1080/02670836.2022.2142744 ↗
14. Sayadi D, Rangrizian H, Khodabandeh A, et al. Using shot peening and burnishing to improve fatigue performance of additively manufactured 316L stainless steel. Proc Inst Mech Eng L: J Mater: Des Appl 2024; 238: 707–722.
15. 10.3390/met1406071010.3390/met14060710 ↗
16. 10.1016/j.jma.2020.06.00810.1016/j.jma.2020.06.008 ↗
17. 10.1007/s12008-023-01529-910.1007/s12008-023-01529-9 ↗
18. 10.1007/s11665-023-08524-x10.1007/s11665-023-08524-x ↗
19. 10.1007/s12008-022-01176-610.1007/s12008-022-01176-6 ↗
20. 10.1177/0954408923119017210.1177/09544089231190172 ↗
21. 10.1007/s00170-020-06350-210.1007/s00170-020-06350-2 ↗
22. 10.1007/s42452-021-04260-w10.1007/s42452-021-04260-w ↗
23. 10.1080/10426914.2020.174384810.1080/10426914.2020.1743848 ↗
24. 10.5545/sv-jme.2021.710610.5545/sv-jme.2021.7106 ↗
25. 10.1007/s40430-017-0871-010.1007/s40430-017-0871-0 ↗
26. 10.1016/j.tsep.2023.10186210.1016/j.tsep.2023.101862 ↗
27. 10.3390/buildings1304089310.3390/buildings13040893 ↗
28. 10.1016/j.optlastec.2022.10798210.1016/j.optlastec.2022.107982 ↗
29. Küçük EÖ, Kılıç M. Exergoeconomic analysis and multi-objective optimization of ORC configurations via Taguchi-Grey Relational Methods. Heliyon 2023; 9: e15007. https://doi.org/10.1016/j.heliyon.2023.e15007
30. 10.1016/j.geothermics.2024.10297410.1016/j.geothermics.2024.102974 ↗
31. 10.1007/s11432-023-3982-y10.1007/s11432-023-3982-y ↗
32. 10.1007/s11269-024-03848-210.1007/s11269-024-03848-2 ↗
33. 10.1007/s11431-022-2394-410.1007/s11431-022-2394-4 ↗