Development of high Mo carbide free thick section nodular cast iron by partial melting homogenisation
Source abstract
Abstract
Sufficient hardenability is required for thick section ductile irons which are the subject of heat treatments. Molybdenum is known as one the best hardenabilty promoter elements; however, it is not common to use it in an extensive content because it segregates severely and promotes the carbide precipitation in the intercellular regions. These carbides have a detrimental effect on the mechanical properties of casting such that keeping the Mo content to a minimum as much as possible is recommended. In this study, a 1·24 pct molybdenum ductile iron which provides sufficient hardenability for about 75 mm thick section iron was used to investigate the precipitated carbides in the intercellular regions and their annihilation by partial melting homogenisation (PMH) process to get a homogenous and carbide free structure. Heating for 9 h at 1090°C was the most successful procedure to annihilate all carbides. Carbides were then extracted and subjected to scanning electron microscopy, energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) analysis, with the results showing that chemical composition of (Fe, Mo, Si)3C is of the same structure as that of Fe3C in which some iron atoms are replaced by Mo and Si. The optimum PMH treated ductile iron was austempered at 370°C for different periods after austenitising at 900°C for 2 h. The hardness tests and microstructural study by optical, scanning electron microscopy and EDS analysis revealed a carbide free and fully homogenised austempered ductile iron.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, PO Box 14395-731, Tehran, Iran
Center of Excellence for High Performance Materials, University of Tehran, PO Box 14395-731, Tehran, Iran
References (22)
Show source-provided references
1. Dorazil E: ‘High strength austempered ductile cast iron’, 1st edn; 1991, London, Ellis Horwood.
2. Boeri R · AFS Trans. · 1989 · 97 · 179
3. Cho GS · J. Mater. Sci. Technol. · 2007 · 23 · 9710.1179/174328407X158488 ↗
4. 10.1179/026708310X1266841553364910.1179/026708310X12668415533649 ↗
5. 10.1179/mst.1995.11.3.28410.1179/mst.1995.11.3.284 ↗
6. 10.1007/BF0265226610.1007/BF02652266 ↗
7. 10.1179/mst.1997.13.10.81310.1179/mst.1997.13.10.813 ↗
8. 10.1016/j.msea.2004.02.00410.1016/j.msea.2004.02.004 ↗
9. Jolley G · Brit. Foundryman · 1967 · 72
10. Lacaze J · Metall. Mater. Trans. A · 1997 · 28 · 201510.1007/s11661-997-0158-7 ↗
11. 10.1361/10549710177033300910.1361/105497101770333009 ↗
12. 10.1179/136404607X23970810.1179/136404607X239708 ↗
13. Sheikholeslam A · Key. Eng. Mater. · 2011 · 457 · 193
14. 10.1016/S1006-706X(09)60040-610.1016/S1006-706X(09)60040-6 ↗
15. Behnke RC: ‘Alloyed chilled iron’, US Patent 4153017, published 1979, U.S.Cl.123/90.51.
16. Black B, Burger G, Logan R, Perrin R, Gundlach R: ‘Microstructure and dimensional stability in Si-Mo ductile irons for elevated temperature applications’, SAE Technical Paper 2002-01-2115, 2002, doi:10·4271/2002-01-2115.
17. 10.2320/jinstmet1952.43.11_106810.2320/jinstmet1952.43.11_1068 ↗
18. 10.1016/j.matlet.2004.02.04110.1016/j.matlet.2004.02.041 ↗
19. Brody MC · Trans. TMS-AIME · 1966 · 236 · 615
20. Neumann G, Tuijn C: ‘Self-diffusion and impurity diffusion in pure metals’, 2009, Oxford, Pergamon Materials Series.10.1016/S1470-1804(08)00007-2 ↗
21. 10.1016/0925-8388(93)90359-U10.1016/0925-8388(93)90359-U ↗
22. Sheikholeslam A: ‘Studying the effect of partial melting Homogenisation (PMH) on microstructure and mechanical properties of 2 Mn austempered ductile iron’, Master's dessertation, University of Tehran, Iran, 2009, 56.10.4028/www.scientific.net/KEM.457.193 ↗