R value measurement issues for grain boundaries in nickel single crystal castings
Source abstract
Abstract
Cast single crystal (SX) nickel superalloy components for modern gas turbine engines are rarely free from grain boundaries. The application relevant properties are grain boundary sensitive, so component specific acceptance standards are applied that include limits for the misorientation between grains across a boundary, the R value. R value calculation requires the determination of the orientations of adjacent grains, both measured using the same arbitrary reference system. Comparisons of extant definitions for this parameter revealed both variations and inconsistencies. Uncertainties for R value measurements were established within a European round robin study using surface back reflection X-ray Laue systems. For some boundaries, a position dependency of the value of R was found. In some specimens, electron backscattered diffraction studies revealed continuous changes in orientation within the grains, as the point examined was moved away from the boundary, providing an explanation of the observed position dependency. Further investigations linked spot splitting and smearing in Laue patterns to different intragrain substructures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Hexmat Materials Consultancy Ltd, 24 Tor Rise, Matlock, Derbyshire DE4 3DL, UK;, Email: clay@hexmat.u-net.com
Division of MaterialsNational Physical Laboratory, Teddington, Middlesex TW11 0LW, UK
References (12)
Show source-provided references
1. Walston W. S., O'Hara K. S., Ross E. W., Pollock T. M., and Murphy W. H.: in ‘Superalloys 1996’, 27; 1996, Warrendale, PA, The Minerals, Metals & Materials Society.10.7449/1996/Superalloys_1996_27_34 ↗
2. Harris K., and Wahl J. B.: in ‘Superalloys 2004’, 45; 2004, Warrendale, PA, The Minerals and Metals Society.10.7449/2004/Superalloys_2004_45_52 ↗
3. Clay K., Jackson J. D., Quested P. N., and Morrell R. ‘Improving single crystal orientation determination for advanced nickel-based superalloys’, Measurement good practice guide no. 112, Issue 1, National Physical Laboratory, Teddington, UK, April 2009.
4. Jones H.: in ‘Industrial applications of X-ray diffraction’, (ed.Chung F. H., and Smith D. K.), Chap. 6, 129; 2000, New York, Marcel Dekker.
5. Cullity B. D.: in ‘Elements of X-ray diffraction’, 2nd edn, Chaps. 3 and 8; 1978, London, Addison Wesley.
6. ‘Standard test method for determining the orientation of a metal single crystal’, E 82-91, ASTM International, Philadelphia, PA, USA, 2007.
7. McCartney L. N., and Clay K. ‘Rigorous analysis for estimating the orientation of cubic crystals’, NPL report MAT 30, National Physical Laboratory, Teddington, UK, 2009.
8. Randle V., and Engler O. ‘Introduction to texture analysis macrotexture, microtexture and orientation mapping’; 2000, Boca Raton, FL, CRC Press.10.1201/9781482287479 ↗
9. http://www.jacksonelectronics.co.uk/R-value.html (accessed April 2008).
10. ‘Standard practice for conducting an interlaboratory study to determine the precision of a test method’, E 691-05, ASTM International, Philadelphia, PA, USA, 2005.
11. 10.1111/j.1365-2818.2005.01513.x10.1111/j.1365-2818.2005.01513.x ↗
12. ‘Guide to the expression of uncertainty in measurement’, International Standardisation Organisation, Geneva, Switzerland, 1993.