journal article·2025-04

BeO in epoxy composites as TIM for high-power LED packages

S. Shanmugan, J. Vishnu Chandar

Materials Science and Technology· Volume 41· Issue 6
Publisher page

Abstract

Beryllium oxide (BeO)-filled epoxy composite was prepared and used as a thermal interface material (TIM) in light-emitting diode (LED) packages. The filler percentages influenced on changing thermal and optical behaviour of LED at various driving currents. An improvement of 14.36% in thermal conductivity was recorded from that of neat epoxy. The lowest total thermal resistance of 10.75 K/W ( R th ) and rise in junction temperature ( T j ) of 3.1°C were recorded at 100 mA driving current for 50 wt-% BeO-filled TIM attached LED followed by an improved optical output and lowered correlated colour temperature values (3466 K). Thermal imaging infra-red imaging analysis also supported the observation of reduced T j and R th values from transient analysis and indicated lower chip surface temperature ( T s ) at all driving currents.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Thermal properties of materials · Mechanical Behavior of Composites · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Thermal Management Research Laboratory, School of Physics, Universiti Sains Malaysia, Minden, Pulau Pinang, Malaysia

Materialcenter of excellence, PTP, PTDI, Sandisk Storage Malaysia-Western Digital, BatuKawan, Malaysia

References (40)

Show source-provided references
1. 10.1016/j.csite.2022.10198910.1016/j.csite.2022.101989 ↗
2. Poppe A, Farkas G, Molnár G, et al. Emerging standard for thermal testing of power LEDs and its possible implementation. In: Tenth International Conference on Solid State Lighting, San Diego, California, United States, 18 August 2010, pp.196–210: SPIE 7784, United States.
3. 10.1016/j.coco.2020.10052810.1016/j.coco.2020.100528 ↗
4. 10.1002/smll.20220069310.1002/smll.202200693 ↗
5. 10.1016/j.compositesb.2013.08.03210.1016/j.compositesb.2013.08.032 ↗
6. 10.1016/j.compscitech.2012.08.02010.1016/j.compscitech.2012.08.020 ↗
7. Liu J, Mou Y, Huang Y, et al. Effects of bonding materials on optical-thermal performances and high-temperature reliability of high-power LED. Micromachines (Basel) 2022; 13: 58.
8. Zhou Y, Wu S, Long Y, et al. Recent advances in thermal interface materials, ES. Mater Manuf 2020; 7: 4–24.
9. 10.3390/polym909041310.3390/polym9090413 ↗
10. 10.1080/00222348.2020.186033910.1080/00222348.2020.1860339 ↗
11. Thuong NT, Lam NB, Son PA, et al. Preparation and characterization of thermally conductive high impact polystyrene/AlN composite. Int J Poly Sci 2024; 2024: 2723981.10.1155/2024/2723981 ↗
12. 10.1002/app.4052810.1002/app.40528 ↗
13. 10.1002/smll.20150217310.1002/smll.201502173 ↗
14. 10.1080/03602559.2010.51232610.1080/03602559.2010.512326 ↗
15. 10.1007/s11148-010-9239-z10.1007/s11148-010-9239-z ↗
16. Nabihah MF, Shanmugan S. Structural parameter and TEM analysis of beryllium oxide nanoparticles synthesized by polyacrylamide gel route. Digest J Nanomater Biostruct 2016; 11: 349–356.
17. 10.1177/0967391121103248710.1177/09673911211032487 ↗
18. Xiu TPT Li YJ Chen H et al. Patent US9127116 B2. 30 Dec (2011).
19. 10.1109/TCAPT.2002.80800310.1109/TCAPT.2002.808003 ↗
20. 10.1016/S0026-2692(02)00185-410.1016/S0026-2692(02)00185-4 ↗
21. Rencz M, Poppe A, Kollár E, et al. A procedure to correct the error in the structure function based thermal measuring methods. In: Twentieth annual IEEE semiconductor thermal measurement and management symposium (IEEE Cat. No. 04CH37545), San Jose, CA, USA, 11 March 2004, pp. 92–97
22. 10.1016/j.ijrefrig.2008.11.00810.1016/j.ijrefrig.2008.11.008 ↗
23. 10.1016/j.polymertesting.2006.11.00310.1016/j.polymertesting.2006.11.003 ↗
24. 10.1016/j.applthermaleng.2014.02.04410.1016/j.applthermaleng.2014.02.044 ↗
25. Ngo IL, Byon C. Thermal conductivity of particle-filled polymers. Poly Sci Book Series 2016: 554–565.
26. 10.1016/j.polymertesting.2004.01.01310.1016/j.polymertesting.2004.01.013 ↗
27. 10.1007/s42452-019-0346-210.1007/s42452-019-0346-2 ↗
28. Sarvar F, Whalley D, Conway P. Proceedings of the 1st electronics systemintegration technology conference. In: Thermal interface materials – A review of the state of the art, Dresden, Germany, 5–7 September 2006, pp. 1292–1302.
29. 10.1021/am401939z10.1021/am401939z ↗
30. 10.1063/1.114517810.1063/1.1145178 ↗
31. 10.1002/app.1987.07034040810.1002/app.1987.070340408 ↗
32. 10.4236/ijmnta.2012.1200510.4236/ijmnta.2012.12005 ↗
33. 10.1007/s10854-014-2238-y10.1007/s10854-014-2238-y ↗
34. 10.1109/MEI.2011.595406410.1109/MEI.2011.5954064 ↗
35. 10.3390/nano1403026710.3390/nano14030267 ↗
36. 10.1021/nl203906r10.1021/nl203906r ↗
37. Jong WH. Advanced Materials and Structural Engineering: Proceedings of the International Conference on Advanced Materials and Engineering Structural Technology (ICAMEST 2015) April 25–26 (2015) 3 Feb 2016 – Technology & Engineering – 996 pages ISBN-1315683024 9781315683027.
38. Ames J. What is CCT? A guide to choosing correlated color temperature for your lighting https://insights.regencysupply.com/what-is-correlated-color-temperature-cct-and-how-do-you-choose-it-for-your lighting (2023 accessed 24 April 2024).
39. Shanmugan S, Mutharasu D, Yin OZ. Performance of light emitting diode on surface machined heat sink. Int J Power Electr Drive Sys 2012; 2: 380–388.
40. https://sensing.konicaminolta.asia/wp-content/uploads/2015/09/Understanding-Color-Rendering-Index-Low.pdf (accessed 23 April 2024).