journal article·2023-06Open access

The effect of tempering conditions on carbides in P110 casing steels

M. Z. Yang, J. B. Wiskel, D. G. Ivey, M. Gaudet, A. Hamilton, J. Liu, H. Henein

Materials Science and Technology· Volume 39· Issue 9

Abstract

The effect of tempering conditions on the carbides in P110 casing steels with two different Cr compositions was studied. Local Mo and Cr concentrations varied from the nominal compositions by ≈± 0.05 wt-% Mo and ≈± 0.07 wt-% Cr. The size of the fine (<20 nm) MC carbides remained relatively unaffected by tempering. Fe-based carbides exhibited a large increase in mean log-normal size from 65 to 102 nm when tempered at 650 and 715°C for 45 min, respectively. This rapid carbide coarsening is attributed to the dissolution of M 23 C 6 carbides at 715°C. Associated with this significant increase in carbide size was an increase in the rate of hardness reduction with increasing Hollmon-Jaffe parameter for temperatures above 650°C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Canada

Research & Development, EVRAZ North America, Regina, Canada

Funding

Natural Science and Engineering Reearch Council of Canada · EVRAZ Inc. NA

References (28)

Show source-provided references
1. Urband B, Bernard F, Morey S Latest enhancements in high strength sour service tubulars. SPE/IADC Drill Conf Proc. 2009;2:1159–1170.
2. 10.4028/www.scientific.net/MSF.941.3310.4028/www.scientific.net/MSF.941.33 ↗
3. 10.1016/j.actamat.2012.01.02610.1016/j.actamat.2012.01.026 ↗
4. 10.1016/j.corsci.2016.07.01310.1016/j.corsci.2016.07.013 ↗
5. 10.1016/j.corsci.2019.10816310.1016/j.corsci.2019.108163 ↗
6. 10.2355/isijinternational.41.64110.2355/isijinternational.41.641 ↗
7. 10.1016/j.actamat.2019.11.04010.1016/j.actamat.2019.11.040 ↗
8. 10.3390/ma1304097210.3390/ma13040972 ↗
9. 10.1016/j.actamat.2007.05.02310.1016/j.actamat.2007.05.023 ↗
10. 10.1007/BF0265024910.1007/BF02650249 ↗
11. 10.3390/met912128310.3390/met9121283 ↗
12. 10.1016/j.compeleceng.2015.03.01710.1016/j.compeleceng.2015.03.017 ↗
13. 10.1016/j.msea.2018.09.04410.1016/j.msea.2018.09.044 ↗
14. 10.1007/s11661-017-4045-610.1007/s11661-017-4045-6 ↗
15. Yang M. Microstructural characterization of quenched and tempered heat-treated P110 casing steels; 2021.10.31399/asm.cp.ht2021p0110 ↗
16. 10.1504/IJMMP.2008.02203310.1504/IJMMP.2008.022033 ↗
17. 10.1007/s11663-007-9104-810.1007/s11663-007-9104-8 ↗
18. 10.1007/s11661-020-06062-y10.1007/s11661-020-06062-y ↗
19. 10.1007/s11661-003-0303-x10.1007/s11661-003-0303-x ↗
20. 10.1007/BF0265024710.1007/BF02650247 ↗
21. 10.1016/j.scriptamat.2010.04.00210.1016/j.scriptamat.2010.04.002 ↗
22. 10.1007/s10853-017-1943-310.1007/s10853-017-1943-3 ↗
23. 10.1016/0001-6160(72)90079-X10.1016/0001-6160(72)90079-X ↗
24. 10.1016/j.matchar.2021.11111110.1016/j.matchar.2021.111111 ↗
25. 10.2320/matertrans.M201830910.2320/matertrans.M2018309 ↗
26. 10.1016/j.msea.2010.05.08410.1016/j.msea.2010.05.084 ↗
27. 10.1080/02670836.2020.179009710.1080/02670836.2020.1790097 ↗
28. 10.1063/1.33723510.1063/1.337235 ↗