journal article·2023-01

Partial austenitisation and TBF steel composed of ferrite, bainitic ferrite, and austenite

Ersoy Erişir, Oğuz Gürkan Bilir, Yunus Emre Sözer, Özge Ararat, Kemal Davut

Materials Science and Technology· Volume 39· Issue 1
Publisher page

Abstract

A TRIP-aided bainitic-ferritic (TBF) steel with a chemical composition of Fe–0.19C–1.7Mn–1.09Si–0.51Al–0.05Nb (wt-%) was partially austenitised from a hot-rolled martensitic initial microstructure. After the hot rolling, the martensitic specimens were reheated to different intercritical temperatures and then austempered at 350°C. Thus, the effect of the initial microstructure of TBF steel on intercritical austenite formation during partial austenitisation was studied. The microstructures were investigated by scanning electron microscopy and electron backscatter diffraction (EBSD), and the tensile properties were tested. Microstructural observations revealed that a final microstructure of fine ferrite, bainitic ferrite, and retained austenite can be obtained. The steel partial austenitised at 770°C showed a good combination of ultimate tensile strength and total elongation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, Kocaeli University, Kocaeli, Turkey

Erdemir, Ereğli Demir ve Çelik Fabrikaları T.A.Ş, Zonguldak, Turkey

Materials Science and Engineering Department, Izmir Institute of Technology, Urla/Izmir, Turkey

Funding

Scientific and Technological Research Council of Turkey · Kocaeli University Research Fund

References (35)

Show source-provided references
1. 10.1179/174328409X45327110.1179/174328409X453271 ↗
2. 10.1016/j.msea.2019.13870810.1016/j.msea.2019.138708 ↗
3. 10.1007/s00501-019-00904-y10.1007/s00501-019-00904-y ↗
4. 10.1002/srin.20170021010.1002/srin.201700210 ↗
5. Dong R · 2015 · 817 · 439
6. 10.2355/isijinternational.40.90210.2355/isijinternational.40.902 ↗
7. Murata T · Kobelco Technol Rev · 2017 · 45 · 17
8. 10.1007/s10704-020-00451-510.1007/s10704-020-00451-5 ↗
9. 10.2355/isijinternational.47.135710.2355/isijinternational.47.1357 ↗
10. 10.2355/isijinternational.45.119410.2355/isijinternational.45.1194 ↗
11. 10.2355/isijinternational.42.91010.2355/isijinternational.42.910 ↗
12. 10.1080/02670836.2019.162517110.1080/02670836.2019.1625171 ↗
13. 10.1016/j.pmatsci.2018.01.00610.1016/j.pmatsci.2018.01.006 ↗
14. 10.2355/isijinternational.44.159010.2355/isijinternational.44.1590 ↗
15. 10.1016/j.jmatprotec.2005.04.06710.1016/j.jmatprotec.2005.04.067 ↗
16. 10.1016/j.mser.2020.10059010.1016/j.mser.2020.100590 ↗
17. 10.1016/j.msea.2015.10.11110.1016/j.msea.2015.10.111 ↗
18. 10.1016/j.msea.2019.06.01510.1016/j.msea.2019.06.015 ↗
19. 10.1016/j.scriptamat.2020.03.02910.1016/j.scriptamat.2020.03.029 ↗
20. 10.1016/j.matchar.2018.05.03810.1016/j.matchar.2018.05.038 ↗
21. 10.1179/02670830077300263610.1179/026708300773002636 ↗
22. 10.1016/j.msea.2006.10.02310.1016/j.msea.2006.10.023 ↗
23. 10.1017/S143192761300155410.1017/S1431927613001554 ↗
24. Bunge HJ. · 2013
25. Standard ASTM · 2004
26. 10.1007/s11837-015-1673-410.1007/s11837-015-1673-4 ↗
27. 10.1017/S143192761100005510.1017/S1431927611000055 ↗
28. 10.1016/j.msea.2019.04.11310.1016/j.msea.2019.04.113 ↗
29. 10.3390/met1101011210.3390/met11010112 ↗
30. 10.3390/met1105076810.3390/met11050768 ↗
31. 10.1016/j.jmrt.2019.01.02110.1016/j.jmrt.2019.01.021 ↗
32. 10.2355/isijinternational.ISIJINT-2017-57610.2355/isijinternational.ISIJINT-2017-576 ↗
33. 10.1016/j.engfracmech.2020.10694910.1016/j.engfracmech.2020.106949 ↗
34. 10.2355/isijinternational.48.82410.2355/isijinternational.48.824 ↗
35. 10.1007/s11837-016-1927-910.1007/s11837-016-1927-9 ↗