journal article·2009-10

Practical method for producing galvanised dual-phase steels with superior strength – ductility combination

L. Chang, T.-R. Chen, Y.-T. Pan, K.-C. Yang

Materials Science and Technology· Volume 25· Issue 10
Publisher page

Abstract

It is a challenge to produce galvanised dual-phase steels based on lean chemistries and with consistent mechanical properties over the entire coil length. A practical method was developed using hot band annealing (HBA) in the ferrite/austenite two-phase region before cold rolling and intercritical annealing. The HBA brings several benefits to the production of galvanised dual-phase steel sheets. First, a finer and more homogeneous microstructure can be obtained. Second, a higher tensile strength is yielded with a similar ductility to the sheets without HBA. The sensitivity of mechanical properties to the annealing parameters such as annealing temperature and cooling rate can also be reduced. Finally, the effect of the microstructure on the strain hardening behaviour was analysed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Opto-electronic Engineering/Center for Nanoscience and NanotechnologyNational Sun Yat-Sen University, Kaohsiung, Taiwan

Department of Steel and Aluminum Research and DevelopmentChina Steel Corporation, Kaohsiung, Taiwan

References (29)

Show source-provided references
1. Matlock D. K. Krauss G. B. Ramos L. F. and Huppi G. S.: in ‘Structure and properties of dual phase steels’ (eds. R. A. Kot and J. W. Morris) 62-90; 1979 Warrendale PA TMS-AIME.
2. 10.1007/BF0265992410.1007/BF02659924 ↗
3. Pichler A., , Traint S., , Arnolder G., , Stiaszny P., , Blaimschein M., and Werner E. A.: Iron Steelmaker, 2003, 30, 21–31.
4. Rege J. S. Inazumi T. Nagataki Y. Urabe T. Smith G. Zuidema B. and Denner S.: Proc. 44th ‘Mechanical Working and Steel Processing’ Conference Orlando FL USA September 2002 Iron and Steel Society/AIME 391–404.
5. 10.4028/www.scientific.net/MSF.539-543.440510.4028/www.scientific.net/MSF.539-543.4405 ↗
6. 10.1179/09506600177104875410.1179/095066001771048754 ↗
7. Grabke H. J. Leroy V. and Viefhaus H.: ISIJ Int. 1995 35 95–113.10.2355/isijinternational.35.95 ↗
8. 10.1007/s11661-001-1042-510.1007/s11661-001-1042-5 ↗
9. 10.4028/www.scientific.net/MSF.537-538.43110.4028/www.scientific.net/MSF.537-538.431 ↗
10. Tumuluru M. D.: Weld J. 2006 85 31–37.10.1111/j.1749-4486.2006.01147.x ↗
11. Gupta P., , Ghosh P. K., , Nath S. K., and Ray S.: Z. Metallkd, 1990, 81, 502–508.
12. Oren E. C. and Goodwin F. E.: Proc. ‘Galvatech ‘04’ Conference Chicago IL USA April 2004 Association for Iron and Steel Technology 737–750.
13. Park K.-T. Han S. Y. Ahn B. D. Shin D. H. Lee Y. K. and Um K. K.: Scripta Mater. 2004 51 909–913.10.1016/j.scriptamat.2004.06.017 ↗
14. Son Y. I. Lee Y. K. Park K.-T. Lee C. S. and Shin D. H.: Acta Mater. 2005 53 3125–3134.10.1016/j.actamat.2005.02.015 ↗
15. Delince M. Brechet Y. Embury J. D. Geers M. G. D. Jacques P. J. and Pardoen T.: Acta Mater. 2007 55 2337–2350.10.1016/j.actamat.2006.11.029 ↗
16. 10.1016/0921-5093(94)09594-M10.1016/0921-5093(94)09594-M ↗
17. Jiang Z. Liu J. and Lian J.: Acta Metall Mater. 1992 40 1587–1597.10.1016/0956-7151(92)90101-J ↗
18. 10.1016/0921-5093(95)09705-810.1016/0921-5093(95)09705-8 ↗
19. Richert J., and Richert M.: Aluminum, 1986, 62, 604–607.
20. 10.1016/0921-5093(91)90316-F10.1016/0921-5093(91)90316-F ↗
21. Lepera F. S., J. Met., 1980, 32, 38–39.
22. Higginson R. L. and Sellars C. M.: ‘Worked examples in quantitative metallography’ 19; 2003 London Maney Publishing.
23. Bastien P. G.: in ‘The Hatfield memorial lectures’ (ed.Beeley P. R.) Vol. 2 95-115; 2001 London Maney Publishing.
24. 10.1007/BF0266332810.1007/BF02663328 ↗
25. Groriterlinden R. Kawalla R. Lotter U. and Pircher H.: Steel Res. 1992 63 331–336.10.1002/srin.199200529 ↗
26. 10.2355/isijinternational.45.38010.2355/isijinternational.45.380 ↗
27. Chang F.-H and Preban A. G.: Acta Metall. 1985 33 897–903.10.1016/0001-6160(85)90114-2 ↗
28. Matlock D. K. and Krauss G.: in ‘Formability and metallurgical structure’ (eds. A. K. Sachdev and J. D. Embury) 33-48; 1987 Warrendale PA The Metallurgical Society.
29. 10.1016/S0020-7683(03)00156-210.1016/S0020-7683(03)00156-2 ↗