journal article·2013-06Open access

Embrittlement of ADI by contact with liquids: Influence of alloy content and preventive methods

R E Boeri, R A Martínez

Materials Science and Technology· Volume 29· Issue 6

Abstract

In view of its excellent mechanical properties and low cost when compared to high strength steels, austempered ductile iron (ADI) is being applied to replace mechanical components in different applications. However, ADI is known to suffer noticeable embrittlement when its surface is in contact with liquids during quasi-static tensile testing. Although the embrittlement phenomena has been characterised in detail, the acting mechanism is not well understood at the present time. Water has shown to cause the greatest degree of embrittlement, while other liquids, such as alcohol and other organic reagents, cause milder though noticeable effects, too. An apparently obvious protection of ADI against the embrittlement caused by liquid environments would be through ADI surface isolation from the environment. The present article examines the efficiency of several paints and coatings by means of tensile tests carried out under dry and wet conditions. From a good number of protective coatings applied on the tensile samples, only one was able to protect the sample under stress from water contact, thus preventing the embrittlement phenomena. The protection method is effective when the layer integrity is not affected by the deformation undergone by the substrate. Another aspect dealt with in the present paper is the assessment of the influence of the chemical composition on the susceptibility of ADI to embrittlement. The results show that the presence of alloy elements in the melt does not influence the degree of embrittlement in the samples.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

INTEMA National University of Mar del Plata – CONICET, Mar del Plata, Argentina

References (13)

Show source-provided references
1. 10.1080/13640461.1999.1181933010.1080/13640461.1999.11819330 ↗
2. 10.1080/13640461.1999.1181933710.1080/13640461.1999.11819337 ↗
3. 10.1080/13640461.2000.1181938410.1080/13640461.2000.11819384 ↗
4. 10.1080/13640461.2003.1181959110.1080/13640461.2003.11819591 ↗
5. Martínez RA, Simison S, Boeri RE: ‘Environmentally assisted embrittlement of ADI – current understanding’, Proc. 2002 World Conf. on ‘ADI’, Louisville, KY, USA, September 2002, AFS Publication, 91–96.
6. 10.1080/13640461.2003.1181958410.1080/13640461.2003.11819584 ↗
7. Rivera G · Int. J. Cast Met. Res. · 1995 · 8 · 1
8. 10.1080/13640461.1999.1181932910.1080/13640461.1999.11819329 ↗
9. Martínez R, Simison S, Boeri R: ‘Crack Initiation in austempered ductile iron strained in contact with different liquids’, Proc. 8th Int. Symp. on ‘Science and processing of cast iron’, Beijing, China, October 2006, Vol. 1, 145–150.
10. 10.1023/A:102442572796310.1023/A:1024425727963 ↗
11. 10.5006/1.327816010.5006/1.3278160 ↗
12. 10.1016/S0142-1123(98)00055-310.1016/S0142-1123(98)00055-3 ↗
13. 10.1016/0142-1123(94)90273-910.1016/0142-1123(94)90273-9 ↗