journal article·2023-12

Investigation on microstructure and mechanical properties of boron-modified 13Cr5Ni2Mo by powder-pack boriding

Samira Tlili, Saida Bouyegh, Abdelkader Daoui, Abdelmoumene Guedri, Mohamed Islam Tlili, Latifa Tairi, Mustapha Djama, Radouane Graine, Djihad Charmati

Materials Science and Technology· Volume 39· Issue 18
Publisher page

Abstract

The main objective of the present paper is to investigate the effect of pack boriding treatment at 950°C/4 h on surface 13 Cr supermartensitic stainless steel. Scanning electron microscopy and X-ray diffractometry were used to characterise the grown boride layers microstructures. In addition, we performed 3D profilometry, microhardness measurements, nanoindentation tests with a Berkovich diamond tip, Daimler-Benz Rockwell-C adhesion, and ball-on-disk wear tests in order to evaluate the mechanical properties. After boriding, the phases were found to be iron borides (FeB/Fe 2 B), chromium borides (CrB), nickel borides (Ni 2 B), and molybdenum borides (Mo 2 B). The results showed that the use of the powder-pack boriding process on 13Cr SMSS at 950°C/4 h conducted in the presence of dual phases (FeB/Fe 2 B) improved the mechanical properties compared to untreated material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Center in Industrial Technologies CRTI, Cheraga, Algeria

Infra-Res Laboratory, Department of Mechanical Engineering, University of Souk Ahras, Souk Ahras, Algeria

ALFAPIPE - Algerian Pipe Manufacturing, Annaba, Algeria

Foundry Laboratory, Badji Mokhtar University, Annaba, Algeria

References (59)

Show source-provided references
1. 10.1016/j.finmec.2021.10006710.1016/j.finmec.2021.100067 ↗
2. 10.1361/1059949041843310.1361/10599490418433 ↗
3. 10.1007/s11661-015-2811-x10.1007/s11661-015-2811-x ↗
4. Yonggang Z, , Wei L, , Yueming F, . Influence of microstructure on the corrosion behavior of super 13Cr martensitic stainless steel under heat treatment. Mat Charact. 2021;75:111066.
5. Villa M, , Niessen F, , Somers M. In situ investigation of the evolution of lattice strain and stresses in austenite and martensite during quenching and tempering of steel. Metall Mat Trans A. 2017;49(1):1–13.
6. 10.1016/j.scriptamat.2018.06.00410.1016/j.scriptamat.2018.06.004 ↗
7. 10.1016/j.msea.2020.14002310.1016/j.msea.2020.140023 ↗
8. 10.1016/j.engfailanal.2018.04.01810.1016/j.engfailanal.2018.04.018 ↗
9. 10.1016/j.msea.2012.01.09310.1016/j.msea.2012.01.093 ↗
10. 10.1016/j.surfcoat.2016.06.02310.1016/j.surfcoat.2016.06.023 ↗
11. 10.1016/j.matdes.2015.06.02010.1016/j.matdes.2015.06.020 ↗
12. 10.1007/s40735-021-00553-010.1007/s40735-021-00553-0 ↗
13. 10.1016/j.apsusc.2015.04.20210.1016/j.apsusc.2015.04.202 ↗
14. 10.1016/j.surfcoat.2018.08.07910.1016/j.surfcoat.2018.08.079 ↗
15. 10.1590/1980-5373-MR-2016-079310.1590/1980-5373-MR-2016-0793 ↗
16. Kumar SV, , Raj GS, , Prince M. Effects of pack boriding and induction boriding on the dry sliding wear behavior of high speed steel. Mater Today Proc. 2022;59:1–6.
17. 10.1016/j.surfcoat.2006.03.03210.1016/j.surfcoat.2006.03.032 ↗
18. 10.1016/j.surfcoat.2017.08.00810.1016/j.surfcoat.2017.08.008 ↗
19. 10.1023/B:JMSC.0000012924.74578.8710.1023/B:JMSC.0000012924.74578.87 ↗
20. 10.15446/dyna.v87n213.8292410.15446/dyna.v87n213.82924 ↗
21. 10.1016/j.surfcoat.2017.07.02010.1016/j.surfcoat.2017.07.020 ↗
22. 10.1080/02670844.2016.126371210.1080/02670844.2016.1263712 ↗
23. 10.1016/j.jmatprotec.2004.01.01510.1016/j.jmatprotec.2004.01.015 ↗
24. 10.1016/S0257-8972(03)00731-X10.1016/S0257-8972(03)00731-X ↗
25. 10.1142/S0218625X1950157910.1142/S0218625X19501579 ↗
26. Gunes I, , Kayali Y, , Ulu S. Investigation of surface properties and wear resistance of borided steels with different B 4 C mixtures. Indian J Eng Mater Sci. 2012;19:397–402.
27. 10.1016/j.jmrt.2021.01.10910.1016/j.jmrt.2021.01.109 ↗
28. 10.1002/mawe.20210011710.1002/mawe.202100117 ↗
29. 10.1016/j.surfcoat.2019.03.04210.1016/j.surfcoat.2019.03.042 ↗
30. 10.1016/S0924-0136(03)00300-510.1016/S0924-0136(03)00300-5 ↗
31. 10.2478/adms-2020-002110.2478/adms-2020-0021 ↗
32. 10.24874/ti.2018.40.03.0910.24874/ti.2018.40.03.09 ↗
33. 10.1116/1.57368610.1116/1.573686 ↗
34. 10.1007/BF0071975910.1007/BF00719759 ↗
35. 10.1016/j.vacuum.2012.03.03010.1016/j.vacuum.2012.03.030 ↗
36. 10.1080/01694243.2015.105261710.1080/01694243.2015.1052617 ↗
37. 10.1016/j.vacuum.2008.03.02610.1016/j.vacuum.2008.03.026 ↗
38. Bjurström T. Röntgenanalyse der systeme eisen-bor, kobalt-bor und nickel-bor. Almqvist and Wiksell. 1933.
39. 10.1016/0022-4596(87)90285-410.1016/0022-4596(87)90285-4 ↗
40. Havinga EE, , Damsma H, , Hokkeling P. Compounds and pseudo-binary alloys with the CuAl2(C16)-type structure I. Preparation and X-ray results. J Less-Common Met. 1972;27:69–186.
41. 10.1016/j.electacta.2016.01.09410.1016/j.electacta.2016.01.094 ↗
42. 10.1016/j.ijplas.2016.10.00510.1016/j.ijplas.2016.10.005 ↗
43. 10.1016/j.jmatprotec.2008.04.04010.1016/j.jmatprotec.2008.04.040 ↗
44. 10.1016/j.vacuum.2021.11014510.1016/j.vacuum.2021.110145 ↗
45. 10.1016/j.matdes.2006.04.01710.1016/j.matdes.2006.04.017 ↗
46. 10.1088/2053-1591/ab119c10.1088/2053-1591/ab119c ↗
47. 10.1007/s12540-013-5019-x10.1007/s12540-013-5019-x ↗
48. 10.1166/mex.2018.146310.1166/mex.2018.1463 ↗
49. 10.1016/j.triboint.2021.10688510.1016/j.triboint.2021.106885 ↗
50. 10.1155/2014/24917410.1155/2014/249174 ↗
51. 10.1590/1516-1439.02551510.1590/1516-1439.025515 ↗
52. 10.1016/j.surfcoat.2006.07.23810.1016/j.surfcoat.2006.07.238 ↗
53. A. A240 Standard Specification for chromium and chromium-nickel stainless steel plate sheet and strip for pressure vessels and for general applications. 2018.
54. 10.1007/s11666-019-00961-210.1007/s11666-019-00961-2 ↗
55. 10.1177/168781401663025710.1177/1687814016630257 ↗
56. 10.4028/www.scientific.net/AMR.65.6310.4028/www.scientific.net/AMR.65.63 ↗
57. 10.1016/j.nimb.2007.01.26610.1016/j.nimb.2007.01.266 ↗
58. 10.1016/j.matpr.2022.07.14010.1016/j.matpr.2022.07.140 ↗
59. 10.24874/ti.970.09.20.1110.24874/ti.970.09.20.11 ↗