journal article·2023-02

Characteristics of advanced high-strength steels obtained by the compact strip production route

Francisco A. Pérez-González, Javier H. Ramírez-Ramírez, Luis E. Hernández, Miguel A. Quiñones, Nelson F. Garza-Montes-de-Oca, Rafael Colás

Materials Science and Technology· Volume 39· Issue 3
Publisher page

Abstract

Advanced high-strength steels are used in structural components of automobiles to reduce their weight, fuel consumption and green-house gas emissions. Their properties result from tailoring their chemical composition and processing conditions to obtain microstructures consisting of a variety of hard and soft components. This work presents the analyses conducted on steels produced by continuous casting into thin moulds and hot rolling directly to the final shape. The microstructure was studied by microscopical techniques; the phase transformations occurring were assessed with the aid of commercial and dedicated computer programs. The stress–strain curves were fitted to different constitutive equations. It was found that the mechanical characteristics differed due to the strategies in design and production followed by the steelmaker.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, San Nicolás de los Garza, México

Metalsa, S.A. de C.V., Apodaca, México

References (46)

Show source-provided references
1. Miller JD, Façanha C. The state of clean transport policy. A 2014 synthesis of vehicle and fuel policy developments. New York: International Council on Clean Transportation; 2014; Available from: www.theicct.org/state-of-clean-transport-policy-2014
2. Meszler D, Delgado O, Rodríguez F European heavy-duty vehicles: cost-effectiveness of fuel efficiency technologies for long-haul tractor-trailers in the 2025-2030 timeframe. Copenhagen: European Environment Agency, Analysis of key trends and drivers in greenhouse gas emissions in the EU between 1990 and 2014, 2016; Available from: www.eea.europa.eu/publications/analysis-of-key-trends-ghg
3. 10.1081/E-EISA-12005041010.1081/E-EISA-120050410 ↗
4. 10.1002/srin.20170021010.1002/srin.201700210 ↗
5. 10.1007/s11661-015-2959-410.1007/s11661-015-2959-4 ↗
6. 10.1002/srin.20170031210.1002/srin.201700312 ↗
7. 10.1016/j.msea.2009.08.01010.1016/j.msea.2009.08.010 ↗
8. 10.1007/s11668-015-0050-510.1007/s11668-015-0050-5 ↗
9. 10.1016/j.actamat.2018.01.03310.1016/j.actamat.2018.01.033 ↗
10. 10.1002/srin.20180040710.1002/srin.201800407 ↗
11. 10.3390/met907074910.3390/met9070749 ↗
12. 10.1016/j.msea.2006.03.02610.1016/j.msea.2006.03.026 ↗
13. 10.1016/j.engfailanal.2021.10589310.1016/j.engfailanal.2021.105893 ↗
14. 10.13005/ojc/29040810.13005/ojc/290408 ↗
15. 10.1002/srin.20170027210.1002/srin.201700272 ↗
16. 10.2355/isijinternational.43.103010.2355/isijinternational.43.1030 ↗
17. Hernández L · J Phys IV · 2004 · 120 · 513
18. 10.2355/isijinternational.51.40910.2355/isijinternational.51.409 ↗
19. ASTM E8/E8M-21. Standard test methods for tension testing of metallic materials. West Conshohocken (PA): ASTM Int.; 2021; Available from: www.astm.org
20. 10.1007/s11837-003-0013-210.1007/s11837-003-0013-2 ↗
21. 10.1088/0965-0393/3/4/00210.1088/0965-0393/3/4/002 ↗
22. 10.1179/mst.1998.14.5.38810.1179/mst.1998.14.5.388 ↗
23. 10.1007/978-0-387-88136-2_610.1007/978-0-387-88136-2_6 ↗
24. 10.1007/BF0266576710.1007/BF02665767 ↗
25. 10.1007/s11663-020-01942-510.1007/s11663-020-01942-5 ↗
26. 10.1081/E-EISA-12005398010.1081/E-EISA-120053980 ↗
27. Bai M · J Univ Sc Techn Beijing Min Met Mat. · 2006 · 13 · 230
28. Hollomon JH. · Trans AIME · 1945 · 162 · 268
29. Voce E. · J Inst Met · 1948 · 74 · 537
30. Pickering FB. · 1978
31. Leslie WC. · 1982
32. Considère A. · Ann Ponts Chaus · 1885 · 9 · 574
33. Turkdogan ET. · Iron Steelmaker · 1989 · 16 · 61
34. Kunze J. · 1991
35. Cui K-Y · Adv Eng Res · 2017 · 110 · 337
36. 10.1016/j.jmrt.2018.04.01010.1016/j.jmrt.2018.04.010 ↗
37. 10.1016/j.matchar.2011.11.01310.1016/j.matchar.2011.11.013 ↗
38. 10.1016/0001-6160(81)90112-710.1016/0001-6160(81)90112-7 ↗
39. 10.1016/0001-6160(84)90202-510.1016/0001-6160(84)90202-5 ↗
40. 10.1016/0036-9748(85)90172-310.1016/0036-9748(85)90172-3 ↗
41. 10.2355/isijinternational.44.17910.2355/isijinternational.44.179 ↗
42. 10.1007/s11661-012-1385-010.1007/s11661-012-1385-0 ↗
43. 10.3390/met902025010.3390/met9020250 ↗
44. 10.1088/0022-3727/7/7/30510.1088/0022-3727/7/7/305 ↗
45. 10.1016/j.msea.2016.09.10810.1016/j.msea.2016.09.108 ↗
46. 10.1063/1.503502810.1063/1.5035028 ↗