journal article·2020-12

Progress in dispersoids distribution precipitating during homogenising Zr-containing Al–Cu–Li and Al–Zn–Mg alloys

Aijun Xu, Jiaqiang Han, Huimin Wang, Wenyue Zheng, Kangmin Niu

Materials Science and Technology· Volume 36· Issue 18
Publisher page

Abstract

Retaining elongated grain microstructure during thermo-mechanical processes would be attractive for obtaining high-strength aluminium alloys with good toughness. A small Zr addition promotes the formation of Al 3 Zr dispersoids to inhibit the recrystallisation. Since the dispersoids precipitate directly from castings, their inhomogeneous distribution reduces the effectiveness on the recrystallisation resistance. This paper systematically summarised the theoretical and experimental contributions to optimise the distribution of dispersoids in the Zr-containing aerospace Al alloys including Al–Cu–Li and Al–Zn–Mg alloys. It is concluded that improving the distribution of dispersoids across a grain can be effectively realised by refining the homogenisation conditions such as lowering ramp heating rate, two-step homogenisation, etc., and by controlling the concentrations of the dispersoid-forming elements such as Zr, Mn, Sc, etc.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Beijing Satellite Manufacturing Co. LTD, China Academy of Space Technology, Beijing, People's Republic of China

School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, People's Republic of China

National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing, People's Republic of China

Funding

Equipment Pre-research Common Project · National Natural Science Foundation of China

References (79)

Show source-provided references
1. 10.1134/S0031918X1609008810.1134/S0031918X16090088 ↗
2. 10.1016/j.jmatprotec.2016.08.02710.1016/j.jmatprotec.2016.08.027 ↗
3. 10.1016/j.matdes.2020.10874610.1016/j.matdes.2020.108746 ↗
4. 10.1016/j.jallcom.2020.15444610.1016/j.jallcom.2020.154446 ↗
5. 10.3390/ma1104057010.3390/ma11040570 ↗
6. 10.1016/j.scriptamat.2010.10.03710.1016/j.scriptamat.2010.10.037 ↗
7. 10.1007/s40195-016-0519-610.1007/s40195-016-0519-6 ↗
8. 10.1016/j.intermet.2012.03.00610.1016/j.intermet.2012.03.006 ↗
9. 10.1016/S1003-6326(16)64149-310.1016/S1003-6326(16)64149-3 ↗
10. 10.1080/02670836.2019.170968910.1080/02670836.2019.1709689 ↗
11. 10.1126/science.aba941310.1126/science.aba9413 ↗
12. 10.1016/S1359-6454(03)00160-510.1016/S1359-6454(03)00160-5 ↗
13. 10.4028/www.scientific.net/MSF.921.19510.4028/www.scientific.net/MSF.921.195 ↗
14. 10.1016/S1359-6454(00)00351-710.1016/S1359-6454(00)00351-7 ↗
15. Kampmann R · Mater Sci Tech · 1991 · 5 · 213
16. 10.1016/j.msea.2006.08.09710.1016/j.msea.2006.08.097 ↗
17. 10.4028/www.scientific.net/AMR.89-91.56810.4028/www.scientific.net/AMR.89-91.568 ↗
18. 10.1080/02670836.2017.140756510.1080/02670836.2017.1407565 ↗
19. 10.4028/www.scientific.net/MSF.396-402.75710.4028/www.scientific.net/MSF.396-402.757 ↗
20. 10.1023/A:101855751055010.1023/A:1018557510550 ↗
21. 10.1016/0001-6160(77)90133-X10.1016/0001-6160(77)90133-X ↗
22. 10.1016/j.matchar.2018.02.03010.1016/j.matchar.2018.02.030 ↗
23. 10.1016/j.actamat.2013.09.01710.1016/j.actamat.2013.09.017 ↗
24. Lynch SP, Wanhill RJH, Byrnes RT Fracture toughness and fracture modes of aerospace aluminum–lithium alloys, aluminum-lithium alloys. Oxford: Elsevier; 2014; p. 415–455.10.1016/B978-0-12-401698-9.00013-6 ↗
25. Huang HH · Mater Sci Tech · 2020 · 37 · 110.1016/j.jmst.2019.07.033 ↗
26. 10.1016/S1471-5317(01)00007-410.1016/S1471-5317(01)00007-4 ↗
27. 10.1016/S0921-5093(02)00061-810.1016/S0921-5093(02)00061-8 ↗
28. 10.1016/S0921-5093(02)00894-810.1016/S0921-5093(02)00894-8 ↗
29. 10.1016/j.actamat.2003.11.02310.1016/j.actamat.2003.11.023 ↗
30. 10.1016/j.actamat.2013.04.05010.1016/j.actamat.2013.04.050 ↗
31. 10.1016/j.actamat.2006.11.04710.1016/j.actamat.2006.11.047 ↗
32. 10.1016/S1003-6326(14)63325-210.1016/S1003-6326(14)63325-2 ↗
33. 10.1016/S1003-6326(17)60085-210.1016/S1003-6326(17)60085-2 ↗
34. 10.1016/j.actamat.2016.09.05210.1016/j.actamat.2016.09.052 ↗
35. 10.1016/j.mtla.2018.09.01210.1016/j.mtla.2018.09.012 ↗
36. 10.1016/j.actamat.2019.02.04710.1016/j.actamat.2019.02.047 ↗
37. 10.1016/j.msea.2020.13997510.1016/j.msea.2020.139975 ↗
38. 10.1023/A:101864801178810.1023/A:1018648011788 ↗
39. 10.1007/s12598-013-0099-910.1007/s12598-013-0099-9 ↗
40. 10.1016/S1003-6326(13)62766-110.1016/S1003-6326(13)62766-1 ↗
41. 10.1016/S1875-5372(16)30141-210.1016/S1875-5372(16)30141-2 ↗
42. 10.1016/j.actamat.2015.03.05710.1016/j.actamat.2015.03.057 ↗
43. 10.1016/j.jallcom.2012.03.10810.1016/j.jallcom.2012.03.108 ↗
44. 10.1016/j.actamat.2014.05.02810.1016/j.actamat.2014.05.028 ↗
45. 10.1051/jp4:200412000610.1051/jp4:2004120006 ↗
46. 10.1016/j.actamat.2012.06.01210.1016/j.actamat.2012.06.012 ↗
47. Forbord B · 2004 · 1179
48. 10.1007/s11661-013-2103-210.1007/s11661-013-2103-2 ↗
49. 10.1016/S0921-5093(99)00652-810.1016/S0921-5093(99)00652-8 ↗
50. 10.1016/j.actamat.2006.12.01510.1016/j.actamat.2006.12.015 ↗
51. 10.1016/j.msea.2007.04.05410.1016/j.msea.2007.04.054 ↗
52. 10.1016/j.jallcom.2017.12.04510.1016/j.jallcom.2017.12.045 ↗
53. 10.1016/j.matlet.2020.12809610.1016/j.matlet.2020.128096 ↗
54. 10.1016/0956-7151(94)90307-710.1016/0956-7151(94)90307-7 ↗
55. 10.1016/j.jallcom.2011.07.05010.1016/j.jallcom.2011.07.050 ↗
56. 10.1016/j.jallcom.2014.06.03310.1016/j.jallcom.2014.06.033 ↗
57. 10.1007/s11661-001-0079-910.1007/s11661-001-0079-9 ↗
58. 10.1016/S0921-5093(98)00615-710.1016/S0921-5093(98)00615-7 ↗
59. 10.1179/mst.1996.12.9.71710.1179/mst.1996.12.9.717 ↗
60. 10.1016/j.msea.2010.01.01210.1016/j.msea.2010.01.012 ↗
61. 10.1007/s10853-010-4828-210.1007/s10853-010-4828-2 ↗
62. 10.1016/S1003-6326(11)61512-410.1016/S1003-6326(11)61512-4 ↗
63. 10.1016/j.matchar.2015.02.01610.1016/j.matchar.2015.02.016 ↗
64. 10.1016/j.matchar.2016.02.00810.1016/j.matchar.2016.02.008 ↗
65. 10.1016/j.actamat.2012.06.02210.1016/j.actamat.2012.06.022 ↗
66. 10.1016/0167-577X(96)00094-810.1016/0167-577X(96)00094-8 ↗
67. 10.4028/www.scientific.net/MSF.217-222.182910.4028/www.scientific.net/MSF.217-222.1829 ↗
68. 10.1007/s11661-019-05368-w10.1007/s11661-019-05368-w ↗
69. 10.1016/S1003-6326(07)60095-810.1016/S1003-6326(07)60095-8 ↗
70. 10.1016/j.jallcom.2007.02.05410.1016/j.jallcom.2007.02.054 ↗
71. 10.1016/j.jallcom.2014.05.12810.1016/j.jallcom.2014.05.128 ↗
72. 10.1016/j.jallcom.2015.10.12210.1016/j.jallcom.2015.10.122 ↗
73. 10.1016/j.msea.2014.08.02410.1016/j.msea.2014.08.024 ↗
74. 10.1016/j.msea.2014.08.04110.1016/j.msea.2014.08.041 ↗
75. 10.1016/j.jallcom.2013.06.02010.1016/j.jallcom.2013.06.020 ↗
76. 10.4028/www.scientific.net/MSF.558-559.15310.4028/www.scientific.net/MSF.558-559.153 ↗
77. 10.1007/BF0267368710.1007/BF02673687 ↗
78. 10.1016/S1359-6462(96)00355-710.1016/S1359-6462(96)00355-7 ↗
79. 10.1016/j.msea.2005.11.02310.1016/j.msea.2005.11.023 ↗