journal article·2020-05

Microstructural and mechanical properties of ultra-high-strength dual-phase steel produced by ultra-fast cooling

Teng Wu, Run Wu, Bin Liu, Wen Liang, Deqing Ke

Materials Science and Technology· Volume 36· Issue 7
Publisher page

Abstract

In the present study, grain refinement of Fe–Si–Mn–Nb–B steel was achieved by high reduction hot rolling. Through the following ultra-fast cooling (UFC) and relaxation process, martensite-ferrite complexes with soft phase embedded in the hard phase were prepared. Extremely tiny ferrite grains significantly increased the toughness of the test steel, a large number of big-angle grain boundaries existing in fine martensite lath bundles effectively improved the strength and the strain hardening ability of the investigated material. The test steel with a relaxation time of 6 s shows the best comprehensive performance with a tensile strength of 1473 MPa, an elongation of 15.0%, a low yield ratio of 0.72 and a product of strength and elongation (PSE) of 22.10 GPa%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan, People's Republic of China

Wuhan Branch of Baosteel Central Research Institute, Wuhan, People's Republic of China

Funding

National Natural Science Foundation of China · State Key Laboratory of Refractories and Metallurgy

References (25)

Show source-provided references
1. 10.1016/j.crhy.2018.11.00410.1016/j.crhy.2018.11.004 ↗
2. 10.1016/S1644-9665(12)60197-610.1016/S1644-9665(12)60197-6 ↗
3. 10.1080/02670836.2017.142102110.1080/02670836.2017.1421021 ↗
4. 10.1016/j.msea.2018.07.08010.1016/j.msea.2018.07.080 ↗
5. Bittence JC. · Mater Eng · 1978 · 87 · 39
6. Jin YS. · La Metall Italiana · 2011 · 6 · 43
7. 10.1016/j.msea.2012.10.04710.1016/j.msea.2012.10.047 ↗
8. 10.1016/j.msea.2014.09.00510.1016/j.msea.2014.09.005 ↗
9. 10.1016/j.msea.2012.12.05510.1016/j.msea.2012.12.055 ↗
10. 10.1016/j.matdes.2013.07.07110.1016/j.matdes.2013.07.071 ↗
11. Peng LG · Adv Mat Res · 2012 · 442 · 199
12. 10.1016/j.actamat.2013.10.00110.1016/j.actamat.2013.10.001 ↗
13. 10.1016/j.actamat.2015.05.00510.1016/j.actamat.2015.05.005 ↗
14. 10.1016/j.actamat.2006.11.02910.1016/j.actamat.2006.11.029 ↗
15. 10.1016/j.actamat.2016.08.01010.1016/j.actamat.2016.08.010 ↗
16. 10.1016/0001-6160(85)90114-210.1016/0001-6160(85)90114-2 ↗
17. 10.1016/j.actamat.2013.06.04310.1016/j.actamat.2013.06.043 ↗
18. 10.4028/www.scientific.net/MSF.783-786.87510.4028/www.scientific.net/MSF.783-786.875 ↗
19. 10.1016/j.msea.2007.02.04210.1016/j.msea.2007.02.042 ↗
20. 10.1016/j.msea.2012.01.01010.1016/j.msea.2012.01.010 ↗
21. 10.1179/03063458279042743310.1179/030634582790427433 ↗
22. 10.1016/j.msea.2012.01.00810.1016/j.msea.2012.01.008 ↗
23. 10.1179/02670830110151104010.1179/026708301101511040 ↗
24. 10.1016/j.msea.2015.05.00510.1016/j.msea.2015.05.005 ↗
25. 10.1007/s10853-009-3392-010.1007/s10853-009-3392-0 ↗