journal article·2018-04Open access

Non-isothermal aging of a high-Zn-containing Al–Zn–Mg–Cu alloy: Microstructure and mechanical properties

Shabnam Emami Kervee, Parnian Pourshayan, Farzaneh Nasrollahnezhad, Saeed Khani Moghanaki, Mohsen Kazeminezhad, Roland E. Logé, Saeed Nobakht

Materials Science and Technology· Volume 34· Issue 6

Abstract

The non-isothermal aging behaviour of a newly developed Al–Zn–Mg–Cu alloy containing 17 wt-% Zn was investigated. Hardness and shear punch tests demonstrated that during non-isothermal aging, the mechanical properties of the alloy first increased and then decreased. The best properties were obtained in a sample which was non-isothermally aged upto 250°C with heating rate of 20°C min −1 , due to the presence of η′/η (MgZn 2 ) phases. This was confirmed by differential scanning calorimetery. After homogenisation, residual eutectic phases remained at triple junctions or in a spherical form. During aging, these phases transformed into rodlike S (Al 2 CuMg)-phase at 400°C, with sizes ranging from 50 to 250 nm. The precipitation sequence in this high-Zn alloy was similar to that for conventional Al–Zn–Mg–Cu alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, Sharif University of Technology, Azadi Avenue, Tehran, Iran

Thermomechanical Metallurgy laboratory - PX Group Chair, Ecole Polytechnique Fédérale de Lausanne (EPFL), Neuchâtel, Switzerland

References (31)

Show source-provided references
1. 10.1016/j.msea.2008.12.01010.1016/j.msea.2008.12.010 ↗
2. 10.4028/www.scientific.net/MSF.788.18710.4028/www.scientific.net/MSF.788.187 ↗
3. 10.1016/j.matchar.2014.04.00410.1016/j.matchar.2014.04.004 ↗
4. 10.1007/s11669-011-9911-010.1007/s11669-011-9911-0 ↗
5. 10.1016/j.matchar.2013.10.03010.1016/j.matchar.2013.10.030 ↗
6. 10.1016/j.matchar.2012.05.01410.1016/j.matchar.2012.05.014 ↗
7. 10.1016/j.matdes.2016.03.15010.1016/j.matdes.2016.03.150 ↗
8. Fan Y · Asia-Pac Eng Technol Conf · 2017 · 421
9. 10.1016/j.pnsc.2017.02.00210.1016/j.pnsc.2017.02.002 ↗
10. 10.1016/j.matdes.2014.09.08610.1016/j.matdes.2014.09.086 ↗
11. 10.1007/s10853-016-0433-310.1007/s10853-016-0433-3 ↗
12. 10.1016/j.msea.2016.05.06010.1016/j.msea.2016.05.060 ↗
13. 10.1016/j.msea.2014.03.02310.1016/j.msea.2014.03.023 ↗
14. 10.1016/j.jallcom.2016.04.20810.1016/j.jallcom.2016.04.208 ↗
15. 10.1016/j.jallcom.2014.04.11910.1016/j.jallcom.2014.04.119 ↗
16. 10.1016/j.matdes.2014.03.06010.1016/j.matdes.2014.03.060 ↗
17. 10.1016/j.jallcom.2016.08.01710.1016/j.jallcom.2016.08.017 ↗
18. 10.1016/j.msea.2017.01.08610.1016/j.msea.2017.01.086 ↗
19. 10.1016/S1359-6454(03)00429-410.1016/S1359-6454(03)00429-4 ↗
20. 10.1080/1478643050015451310.1080/14786430500154513 ↗
21. 10.1016/j.msea.2014.04.04010.1016/j.msea.2014.04.040 ↗
22. 10.1007/s12613-014-1029-z10.1007/s12613-014-1029-z ↗
23. 10.1007/s11661-013-1731-x10.1007/s11661-013-1731-x ↗
24. 10.4028/www.scientific.net/MSF.331-337.107110.4028/www.scientific.net/MSF.331-337.1071 ↗
25. 10.1007/s11665-011-9973-510.1007/s11665-011-9973-5 ↗
26. 10.1016/j.actamat.2004.10.04810.1016/j.actamat.2004.10.048 ↗
27. 10.1016/j.jmatprotec.2015.07.01810.1016/j.jmatprotec.2015.07.018 ↗
28. 10.1016/S1359-6454(98)00293-610.1016/S1359-6454(98)00293-6 ↗
29. 10.1007/s12598-014-0222-610.1007/s12598-014-0222-6 ↗
30. Panahi D. · master's thesis] · 2009
31. 10.1007/s10853-010-4828-210.1007/s10853-010-4828-2 ↗