Effects of microstructural changes, loading conditions and test temperature on toughness of fully pearlitic eutectoid steel used in transportation industry
Source abstract
Abstract
The mode I fracture toughness of fully pearlitic eutectoid steel used in the transportation industry has been investigated at temperatures ranging from −196 to 225°C using bend bar specimens notched and fatigue precracked to contain different root radii. The effects of changes in microstructure on the cleavage fracture stress were determined over a similar range. In addition, the notched and fatigue precracked specimens have been subjected to combined mode I/II fracture under asymmetric three point bend loading at −125°C on different microstructural conditions. Increasing the offset distance between the notch and the loading point produces an increase in the ratio mode II/mode I, a change in the crack deflection angle and a reduction in the total energy of fracture. Significant effects of changes in microstructure, test temperature and notch root radius on the toughness will be presented, followed by the significant effects of changes in microstructure and the ratio mode II/mode I on the fracture load, crack deflection angle and resulting toughness. Fractured specimens were examined both macroscopically and microscopically using stereomicroscope and scanning electron microscopy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. 10.1007/BF0322240510.1007/BF03222405 ↗
2. 10.1016/S0921-5093(00)01947-X10.1016/S0921-5093(00)01947-X ↗
3. Ueda M., and Uchino K. ‘Thermomechanical processing and mechanical properties of hypereutectoid steels and cast irons’, (ed.Lesuer D. R.), 161-174; 1997, Warrendale, PA, TMS.
4. 10.1007/BF0270098210.1007/BF02700982 ↗
5. Ochiai I., Nishida S., and Tashiro H.: Proc. 63rd Annual Convention of The Wire Association International, Atlanta, GA, USA, 39–49; 1993.
6. Taleff E. M., Syn C. K., Lesuer D. R., and Sherby O. D. ‘Thermomechanical processing and mechanical properties of hypereutectoid steels and cast irons’, (ed. Lesuer D. R. et al.),127–142; 1997, Warrendale, PA, TMS.
7. Alexander D. J. · Metall Mater. Trans. A · 1987 · 20 · 232110.1007/BF02666667 ↗
8. Porter D. A., Easterling K. E., and Smith G. D. W.: Acta Metall. 1978, 26, 1405–142210.1016/0001-6160(78)90156-6 ↗
9. 10.1007/BF0281169810.1007/BF02811698 ↗
10. 10.1007/BF0281727510.1007/BF02817275 ↗
11. 10.1007/BF0265660610.1007/BF02656606 ↗
12. 10.1007/BF0264283210.1007/BF02642832 ↗
13. 10.1179/03071698480327483710.1179/030716984803274837 ↗
14. 10.1007/BF0264395310.1007/BF02643953 ↗
15. 10.1007/BF0264422010.1007/BF02644220 ↗
16. Toribio J. · Int. J. Fracture · 1997 · 87
17. 10.1016/S0142-1123(03)00140-310.1016/S0142-1123(03)00140-3 ↗
18. Alexander D. J., and Bernstein I. M.: in ‘Phase transformation in ferrous alloys’, (ed.Marder A. R., and Goldstein J. I.), 243–257;1984, Warrendale, PA, TMS-AIME
19. Irwin G. R.: in ‘Encyclopedia of physics’, (ed.Flugge S.), Vol. 6,551–590;1958, Berlin, Springer.10.1007/978-3-642-45887-3_5 ↗
20. 10.1016/0013-7944(89)90243-910.1016/0013-7944(89)90243-9 ↗
21. Erodogan F., and Sih G. C.: J. Basic Eng. Trans., 1963, ASME Ser.D85, 519–527.10.1115/1.3656897 ↗
22. 10.1016/0956-7151(90)90037-H10.1016/0956-7151(90)90037-H ↗
23. 10.1111/j.1151-2916.1990.tb05189.x10.1111/j.1151-2916.1990.tb05189.x ↗
24. Shah R. C. ‘Fracture analysis’, ASTM STP 560, 29-52; 1974, Philadelphia, PA, ASTM.
25. 10.1016/0013-7944(92)90233-510.1016/0013-7944(92)90233-5 ↗
26. 10.1016/0956-7151(94)90385-910.1016/0956-7151(94)90385-9 ↗
27. 10.1016/0022-5096(71)90009-310.1016/0022-5096(71)90009-3 ↗
28. ‘Standard test method for measurement of fatigue crack growth rate’, Annual Book of ASTM Standards, E 647-98, ASTM, Philadelphia, PA, USA, 2000.
29. ‘Standard test method for plane strain fracture toughness of metallic materials’, Annual Book of ASTM Standards, E 399-98, ASTM, Philadelphia, PA, USA, 2000.
30. Wang K. J. · Fracture · 1977 · 4 · 123
31. Margevicius R. W. · Mater. Sci. Eng. A · 1990 · 270 · 19710.1016/S0921-5093(99)00252-X ↗
32. Lewandowski J. J., and Thompson A. W.: Acta Metall., 1987, >35,1453–1462.10.1016/0001-6160(87)90091-5 ↗
33. 10.1016/0022-5096(68)90014-810.1016/0022-5096(68)90014-8 ↗
34. 10.1016/0022-5096(68)90013-610.1016/0022-5096(68)90013-6 ↗
35. 10.1016/0022-5096(73)90008-210.1016/0022-5096(73)90008-2 ↗
36. 10.1007/s11661-997-0140-410.1007/s11661-997-0140-4 ↗
37. 10.1007/s11661-997-0187-210.1007/s11661-997-0187-2 ↗
38. 10.1007/BF0264948010.1007/BF02649480 ↗
39. 10.1016/0001-6160(65)90121-510.1016/0001-6160(65)90121-5 ↗
40. 10.1179/03063457679043145310.1179/030634576790431453 ↗
41. 10.1016/0013-7944(91)90076-D10.1016/0013-7944(91)90076-D ↗