journal article·2023-02

Ellipsoidal equiaxial grain of 7055 aluminium alloy in vacuum centrifugal casting

Li Yong, Wang Yin, Qian Xiao-Ming, Zhang Bo-si, Wang Zhao-dong

Materials Science and Technology· Volume 39· Issue 3
Publisher page

Abstract

The 7055 aluminium alloy cast tube was prepared by vacuum centrifugal casting technology. The radial and axial microstructure of the alloy was observed by optical microscope and electron probe. The results showed that the as-cast microstructure is uniform and fine equiaxed, and intermetallic compounds are distributed at grain boundaries. In addition, the circumferential grain size and the number of intermetallic compounds were larger than that in the axial direction. The grains are ellipsoidal and equiaxed. This is the result of directional heat conduction, solid solubility migration and redistribution of solute during the solidification process of centrifugal casting. After homogenisation, the grains tend to be spherical equiaxed crystals, which is the result of different degrees of recrystallisation in the circumferential and axial directions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, People's Republic of China

Guangxi Advanced Aluminum Processing Innovation Center Co. LTD, Nanning, People's Republic of China

Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang, People's Republic of China

National Cold Rolling Strip Equipment and Process Engineering Technology Research Center, Yanshan University, Qinhuangdao, People's Republic of China

Funding

Major Special Project of Science and Technology in Nanning · Key Research and Development Program of Shandong · Key Laboratory of Electromagnetic Processing of Materials and the State Key Laboratory of Rolling and Automation · Northeastern University

References (18)

Show source-provided references
1. Ramesh S · Mater Today: Proc · 2021 · 46 · 5722
2. Guofu J · Trans Nonferrous Met Soc China · 2021 · 31 · 2313
3. Guoyuan X. · Met Work (Hot Working) · 2021 · 08 · 96
4. 10.1016/j.actamat.2003.08.02310.1016/j.actamat.2003.08.023 ↗
5. 10.1016/S1003-6326(11)61512-410.1016/S1003-6326(11)61512-4 ↗
6. 10.1016/j.vacuum.2020.10993710.1016/j.vacuum.2020.109937 ↗
7. 10.1016/j.jmapro.2020.10.07110.1016/j.jmapro.2020.10.071 ↗
8. 10.1016/j.matpr.2021.01.44710.1016/j.matpr.2021.01.447 ↗
9. Jitao S. · Light Alloy Process Technol · 2007 · 06 · 17
10. Zelei Z · Cast Technol · 2010 · 31 · 1517
11. Taifeng K · Spec Cast Nonferrous Alloys · 2020 · 40 · 824
12. Guojun L · Spec. Cast. Nonferrous Alloys · 2018 · 38 · 1277
13. Yong L · Trans. Nonferrous Met. Soc. China · 2021
14. 10.1051/mfreview/202002410.1051/mfreview/2020024 ↗
15. 10.1007/s12540-020-00690-010.1007/s12540-020-00690-0 ↗
16. 10.1007/s12540-019-00391-310.1007/s12540-019-00391-3 ↗
17. Jiayi W. Study on strengthening and toughening mechanism and aging stability of AA7021 aluminum alloy sheet [AA7021铝合金薄板强韧化机制及时效稳定性研究]. University of Science and Technology Beijing [北京科技大学]. 2019.
18. Jinrong Z. Improvement of microstructure and properties of 7055 aluminum alloy by deformation heat treatment based on strain-induced precipitation [基于应变诱导析出的形变热处理工艺对7055铝合金组织和性能的改善]. University of Science and Technology Beijing [北京科技大学]. 2018.