Effect of Si and Al on microstructure-property-relationship of Q&P-steels during galvannealing
Source abstract
Abstract
The influence of a thermal-treatment simulating a galvannealing-process (GA) on the microstructure of a 0.2C–4Mn–1.5Si and 0.2C–4Mn–1.5Al (in wt-%) medium-Mn-Q&P-steel was investigated in detail using dilatometry. After Q&P-process, the retained austenite (RA) fraction is higher and mechanical properties are superior for the Si-concept. Owing to galvannealing, strength decreases substantial for both concepts. For the Si-concept however, RA starts to decompose into pearlite upon galvannealing temperatures of 520°C, leading to a significant decrease in elongation. For the Al-concept, the RA-fraction remains constant up to 560°C, which even results in increased elongations values compared to the galvannealed Si concept. This contribution shows that Al as an alloy-element in Q&P-steel is more suitable for RA stabilisation at higher temperature than Si.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department for Materials Technology, University of Applied Sciences Upper Austria, Wels, Austria
Institute of Material Science, Joining and Forming, Graz University of Technology, Graz, Austria
Research & Development and Innovation, voestalpine Steel GmbH, Linz, Austria
Funding
Österreichische Forschungsförderungsgesellschaft
References (31)
Show source-provided references
1. Spenger F, Hebesberger T, Pichler A AHSS steel grades: strain hardening and damage as material design criteria. Int. Conf. on New Developments in AHSS, Orlando, USA; 2008: 39–49.
2. Matlock DK · Jestech · 2012 · 15 · 1
3. 10.1016/S1359-6454(03)00059-410.1016/S1359-6454(03)00059-4 ↗
4. 10.1016/j.actamat.2011.06.01410.1016/j.actamat.2011.06.014 ↗
5. 10.3390/met910112210.3390/met9101122 ↗
6. De Moor E · Mater Sci Technol · 2009 · 1554
7. Speer JG, Streicher AM, Matlock DK Quenching and partitioning: A fundamentally new process to create high strength TRIP sheet microstructures. Symp. on Austenite formation and decomposition, Chicago, USA; 2003: 505–22.
8. 10.1016/j.msea.2016.02.07110.1016/j.msea.2016.02.071 ↗
9. 10.1016/j.cossms.2004.09.00310.1016/j.cossms.2004.09.003 ↗
10. 10.1016/j.actamat.2007.08.05110.1016/j.actamat.2007.08.051 ↗
11. 10.1016/j.matdes.2019.10786210.1016/j.matdes.2019.107862 ↗
12. 10.1002/srin.20200018110.1002/srin.202000181 ↗
13. 10.2355/isijinternational.51.13710.2355/isijinternational.51.137 ↗
14. 10.1179/174328408X27597310.1179/174328408X275973 ↗
15. 10.1016/j.actamat.2007.05.02310.1016/j.actamat.2007.05.023 ↗
16. 10.1007/BF0264638310.1007/BF02646383 ↗
17. 10.1016/j.actamat.2015.11.03210.1016/j.actamat.2015.11.032 ↗
18. 10.1016/j.actamat.2015.01.02410.1016/j.actamat.2015.01.024 ↗
19. 10.1016/j.matchar.2020.11024210.1016/j.matchar.2020.110242 ↗
20. 10.1007/s10853-018-2037-610.1007/s10853-018-2037-6 ↗
21. De Moor E, Lacroix S, Samek L Dilatometric study of the quench and partitioning process. 3rd Int. Conf. of advanced structural steels Gyeongju, Korea; 2006.
22. 10.1016/S0079-6425(98)00006-110.1016/S0079-6425(98)00006-1 ↗
23. 10.1179/09506600177104875410.1179/095066001771048754 ↗
24. 10.1179/02670830322500930010.1179/026708303225009300 ↗
25. 10.1016/j.jmst.2017.09.00210.1016/j.jmst.2017.09.002 ↗
26. 10.1016/j.msea.2017.03.01710.1016/j.msea.2017.03.017 ↗
27. 10.3139/146.11074410.3139/146.110744 ↗
28. 10.3390/met903035310.3390/met9030353 ↗
29. Bhadeshia HKDH · 2006
30. 10.1007/s11661-015-3285-610.1007/s11661-015-3285-6 ↗
31. 10.1016/j.mtla.2019.10049210.1016/j.mtla.2019.100492 ↗