journal article·2019-09

The microstructure and the mechanical property of AZ91D solidified under GPa-grade high-pressure

Wang Lin, Lin Xiaoping, Xu Chang, Zhao Shengshi, Sun Heng, Zhang Ning

Materials Science and Technology· Volume 35· Issue 14
Publisher page

Abstract

High-pressure (2–4 GPa) solidified AZ91D alloy was prepared and the microstructure was investigated by X-ray energy diffraction and scanning electronic microscopy. The room-temperature compression deformation behaviour was also studied. The results showed that the high-pressure solidified AZ91D alloy was composed of nanometre β-Mg 17 Al 12 and equiaxed α-Mg dendrites. The average size of α-Mg grains decreased from 395 ± 5 µm (atmosphere pressure) to 12 ± 3 µm (4 GPa) and the solubility of Al in α-Mg increased to 6.25 wt-% at 4 GPa. The compression strength of 402 MPa and the relative compression ratio of 27% (4 GPa) were 50% and 93% higher than the original AZ91D. Meanwhile, high pressure can also decreased the corrosion rate from 0.0675 mA/cm 2 (atmosphere pressure) to 0.0122 mA/cm 2 (4 GPa).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Northeastern University, Shenyang, People's Republic of China

School of Resources and Materials, Northeastern University, Qinhuangdao, People's Republic of China

Qinhuangdao Key Laboratory of Advanced Metal Materials and Molding Technology, Qinhuangdao, People's Republic of China

Funding

National Natural Science Foundation of China · Natural Science Foundation of Hebei Province

References (30)

Show source-provided references
1. Liu QX · Jiangxi Sci · 2014 · 32 · 62
2. Zhao Z · Spec Cast Nonferr Alloys · 2008 · 04 · 294
3. Ren J · Cast Technol · 2016 · 37 · 1212
4. Cui HW · Spec Cast Nonferr Alloys · 2007 · 12 · 968
5. Guo F · J Chin Soc Rare Earth · 2010 · 05 · 596
6. Zhao HJ · Spec Cast Nonferr Alloys · 2007 · 1 · 360
7. Liu QX · Heat Treat Metal · 2016 · 41 · 69
8. Xu J · Trans Metal Heat Treat · 2011 · 32 · 30
9. Zheng WC · Acta Metall Sin · 2006 · 42 · 835
10. 10.1016/j.jallcom.2005.06.05910.1016/j.jallcom.2005.06.059 ↗
11. 10.1016/j.scriptamat.2010.11.04910.1016/j.scriptamat.2010.11.049 ↗
12. Sobczak JJ · Cast Metal · 2013 · 25 · 1
13. 10.1016/S1002-0721(16)60045-510.1016/S1002-0721(16)60045-5 ↗
14. 10.1016/j.jallcom.2013.09.02610.1016/j.jallcom.2013.09.026 ↗
15. 10.1016/j.jallcom.2016.07.01610.1016/j.jallcom.2016.07.016 ↗
16. Jin W. Harbin Institute of Technology. 2014.
17. 10.1016/j.matdes.2011.08.03010.1016/j.matdes.2011.08.030 ↗
18. 10.1016/j.jre.2017.09.00210.1016/j.jre.2017.09.002 ↗
19. 10.1007/s10853-017-1698-x10.1007/s10853-017-1698-x ↗
20. Guo XF. · 2010
21. 10.1179/136404606X14776510.1179/136404606X147765 ↗
22. Liu C · Foundry · 2017 · 66 · 1057
23. 10.1016/S1003-6326(09)60097-210.1016/S1003-6326(09)60097-2 ↗
24. Wei ZJ · Spec Cast Nonferr Alloys · 2006 · 26 · 685
25. 10.1016/j.jmst.2017.07.02210.1016/j.jmst.2017.07.022 ↗
26. 10.1016/j.jallcom.2010.12.06510.1016/j.jallcom.2010.12.065 ↗
27. 10.1016/j.msea.2017.04.06910.1016/j.msea.2017.04.069 ↗
28. Yong QL. The second phase in steel materials. Beijing: Metallurgical Industry Press; 2006. p. 42–43.
29. 10.1016/j.materresbull.2018.09.01110.1016/j.materresbull.2018.09.011 ↗
30. 10.1016/j.matdes.2017.03.05310.1016/j.matdes.2017.03.053 ↗