journal article·2014-06

In situ high resolution transmission electron microscopy investigation of deformation mechanism in sub-10-nm Au crystals

X. Q. Zhu, Q. Feng, D. Z. Liu, A. M. Nie, J. B. Liu, X. B. Zhang, L. M. Geng

Materials Science and Technology· Volume 30· Issue 7
Publisher page

Abstract

In situ high resolution transmission electron microscopy investigations were performed on sub-10-nm Au crystals. The effects of tensile loading direction and crystal size on the deformation mechanism of Au crystals were analysed. For the Au crystals with a width below 2 nm, the surface atom diffusion with a phenomenon of layer by layer peeling is the main deformation mechanism and the tensile loading direction plays negligible effect. For the Au crystals with a width over 7 nm, the dislocations generated form surface and gliding into crystal dominate the plastic deformation and the tensile loading direction plays important role. Lomer dislocations are produced and destructed by dislocation reaction during tensile strain process in <001> oriented Au crystal. The Schmid law is the key intrinsic issue controlling the deformation mechanism for the nanowires with a size larger than 7 nm.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Advanced Materials Characterization Techniques · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Zhejiang University, Hangzhou 310027, China

Institute of Applied Mechanics, Zhejiang University, Hangzhou 310027, China

China Ship Development and Design Center, Wuhan 430064, China

References (29)

Show source-provided references
1. 10.1103/PhysRev.85.1060.210.1103/PhysRev.85.1060.2 ↗
2. Brenner S. S. · J. Appl. Phys. · 1956 · 30 · 26610.1063/1.1735145 ↗
3. 10.1016/j.actamat.2004.12.03110.1016/j.actamat.2004.12.031 ↗
4. 10.1103/PhysRevB.73.24541010.1103/PhysRevB.73.245410 ↗
5. 10.1016/j.tsf.2006.01.03010.1016/j.tsf.2006.01.030 ↗
6. 10.1038/nmat208510.1038/nmat2085 ↗
7. Gilman J. J. ‘Micromechanics of flow in solids’, 1st edn, Vol. 1, 187; 1969, New York, McGraw-Hill Inc.
8. 10.1038/ncomms276810.1038/ncomms2768 ↗
9. 10.1016/j.scriptamat.2004.08.02510.1016/j.scriptamat.2004.08.025 ↗
10. 10.1016/j.jmps.2007.01.00110.1016/j.jmps.2007.01.001 ↗
11. Liang W. · Philos. Mag., 2007, 87 · 2191
12. 10.1021/nl051591010.1021/nl0515910 ↗
13. 10.1115/1.192891510.1115/1.1928915 ↗
14. 10.1103/PhysRevB.73.11540910.1103/PhysRevB.73.115409 ↗
15. 10.1103/PhysRevLett.95.25550410.1103/PhysRevLett.95.255504 ↗
16. 10.1557/mrs2009.4910.1557/mrs2009.49 ↗
17. 10.1109/JMEMS.2007.91271410.1109/JMEMS.2007.912714 ↗
18. 10.1007/s12274-011-0177-y10.1007/s12274-011-0177-y ↗
19. 10.1038/ncomms114910.1038/ncomms1149 ↗
20. 10.1016/j.scriptamat.2011.05.00910.1016/j.scriptamat.2011.05.009 ↗
21. 10.1103/PhysRevLett.109.22550110.1103/PhysRevLett.109.225501 ↗
22. 10.1103/PhysRevLett.79.345510.1103/PhysRevLett.79.3455 ↗
23. 10.1103/PhysRevLett.85.412410.1103/PhysRevLett.85.4124 ↗
24. 10.1016/j.actamat.2012.09.01810.1016/j.actamat.2012.09.018 ↗
25. 10.1007/BF0054816010.1007/BF00548160 ↗
26. Hull D., and Bacon (eds.) D. J. ‘Introduction to dislocations’; 5th edn, 100; 2011, Oxford, Butterworth-Heinemann.10.1016/B978-0-08-096672-4.00003-7 ↗
27. 10.1002/adfm.20110122410.1002/adfm.201101224 ↗
28. 10.1038/nnano.2012.11610.1038/nnano.2012.116 ↗
29. 10.1063/1.9773910.1063/1.97739 ↗