journal article·2006-11

Characterisation of microstructure and thermal stability of rapidly solidified Al–8·5Fe–1·3V–1·7Si alloy during prolonged exposure at 625°C

E. Solis-Ramos, H. Jones, W. M. Rainforth

Materials Science and Technology· Volume 22· Issue 11
Publisher page

Abstract

Al–8·5Fe–1·3V–1·7Si (wt-%) alloy consolidated and rolled into sheet from pulverised planar flow cast material has been subjected to exposure times up to 575 h at 625°C. Both as received and exposed samples were investigated to reveal the effect of the exposure on microstructural stability, including dispersoid size. Microstructural characterisation was performed by a combination of X-ray diffraction, differential thermal analysis, and scanning and transmission electron microscopy. The results showed the presence of coarse plate shaped Al13Fe4 particles after 2 h at 625°C and additional polyhedral shaped Al13(Fe,V)3Si particles were observed evenly distributed within the matrix after exposure at 625°C for 290 h. Even after 575 h at 625°C, the silicide phase in the material retained the same bcc structure as in the as received condition but with a slightly increased lattice parameter. The experimentally determined coarsening rates of silicides in the material were a factor of 2 to 3 lower than predictions based on control by volume diffusion of V in the α-Al matrix.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. 10.1016/0036-9748(86)90456-410.1016/0036-9748(86)90456-4 ↗
2. Gilman P. S. · Met. Powder Rep · 1989 · 44 · 616
3. Gilman P. S. · Met. Mater · 1990 · 6 · 504
4. Das S. K. · Mater. Set Eng. A · 1991 · A134
5. Zedalis M. S., Raybould D., Skinner D. J., and Das S. K.: in ‘Processing of structural materials by rapid solidification’, (ed.Froes F. H., and Savage S. J.), 347-354; 1987, Metals Park, OH, ASM.
6. 10.1016/0036-9748(89)90103-810.1016/0036-9748(89)90103-8 ↗
7. 10.1007/BF0265899410.1007/BF02658994 ↗
8. Park W. J., Ahn S., and Kim N. J.: Mater. Sei. Eng. A, 1994, A189,291–299.10.1016/0921-5093(94)90427-8 ↗
9. Wang J.Q., Tseng M.K., Chen X.F., Zhang B.J., and Ze X.Y.: Mater. SeL Eng. A, 1994, A179/180,412–415.10.1016/0921-5093(94)90237-2 ↗
10. Wilkes D. M. J., and Jones H.: in ‘Science and technology of rapid solidification and processing’, (ed.Otooni M. A.), 158–171; 1995, Dordrecht, Kluwer.
11. Wilkes D. M. J., Jones H., and Gardiner R. W.: Mater. Sei. Forum, 1996, 217-222,943–948.10.4028/www.scientific.net/MSF.217-222.943 ↗
12. Ezersky V., and Talianker M.: Mater. SeL Forum, 1998, 269-272,607–612.10.4028/www.scientific.net/MSF.269-272.607 ↗
13. 10.1023/A:101758413135710.1023/A:1017584131357 ↗
14. Hambleton R., Jones H., and Rainforth W. M.: Mater. Set Eng. A, 2001, A304/306,524–528.10.1016/S0921-5093(00)01508-2 ↗
15. 10.1023/A:100435270411310.1023/A:1004352704113 ↗
16. 10.1007/BF0264947610.1007/BF02649476 ↗
17. Kim N. J. · Int. J. Rapid Solidif · 1991 · 6 · 175
18. 10.1007/BF0072652310.1007/BF00726523 ↗
19. Yaneva S., Kalkanli A., Petrov K., Petrov R.Jr, Houbaert Y., and Kassabov S.: Mater. Sei. Eng. A, 2004, A373,90–98.10.1016/j.msea.2003.12.034 ↗
20. Gilman P. S., Das S. K., Raybould D., Zedalis M. S., and Peltier J. M.: Proc. 2nd Int. Conf. on ‘Metals and metals processing’, (ed.Froes F. H., and Cull R. A.), 91-101; 1988, Covina, CA, SAMPE.
21. Pontikakos I., and Jones H.: Met. SeL 1, 1982, 16,27–30.10.1179/030634582790427037 ↗
22. 10.1007/s11661-005-0094-310.1007/s11661-005-0094-3 ↗
23. 10.1007/s11661-003-0343-210.1007/s11661-003-0343-2 ↗
24. 10.1179/02670830422502221410.1179/026708304225022214 ↗
25. Skinner D. J.: in ‘Dispersion strengthened aluminium alloys’, (ed.Kim Y. W., and Griffith W. M.), 181-197; 1988, Warrendale, PA, TMS.
26. Khatri S. C., Lawley A., Koczak M. J., and Grassett K. G.: Mater. Sci. Eng. A, 1993, A167,11–21.10.1016/0921-5093(93)90331-8 ↗
27. Wang J. · Chin. J. Mater. Res · 1997 · 11 · 316
28. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
29. Wagner C. · Z. Elektrochem · 1961 · 65 · 581
30. 10.4028/www.scientific.net/MSF.13-14.10110.4028/www.scientific.net/MSF.13-14.101 ↗
31. Rummel G. · Z. Metaad · 1995 · 85 · 122
32. Massalski T. B. · 1986
33. Bergner D. · Halle · 1977 · 15 · 15
34. 10.1016/S1359-6462(02)00153-710.1016/S1359-6462(02)00153-7 ↗
35. Voorhees P. W. · Metall · 1984 · 0
36. Ardell A. J.: in ‘Phase transformations 1987’, (ed.Lorimer G. W.), 485-494; 1988, London, The Institute of Materials.