journal article·2011-12

Effects of spiral geometries on grain selection during casting of single crystal superalloys

S F Gao, L Liu, X B Zhao, T W Huang, J Zhang, H Z Fu

Materials Science and Technology· Volume 27· Issue 12
Publisher page

Abstract

Grain texture evolution in starter block during single crystal (SX) casting with a grain selector had been investigated. Several spiral grain selectors with different spiral geometries were designed to investigate the effects of spiral geometries on grain selection in spiral passage. The results indicated that the percentage of grains with a deviation angle of <10° from the axial orientation increased simultaneously with distance from the chill plate. When the distance reached 36·1 mm, nearly 90 of the grains’ misorientations were <10°, and the minor grains deviated >12°. As the spiral angle θ and the spiral thickness T decrease, the SX structure occurred at the lower position of the grain selector. In addition, it was concluded that the SX structure cannot be selected when the spiral angle is <15°. Moreover, the effect of spiral geometries on grain selection has also been discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Solidification Processing Northwestern Polytechnical University, Xi'an, China

References (25)

Show source-provided references
1. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
2. 10.1179/026708309X1246892734945110.1179/026708309X12468927349451 ↗
3. 10.1179/026708309X1256033273663810.1179/026708309X12560332736638 ↗
4. 10.1179/174328408X36940110.1179/174328408X369401 ↗
5. 10.7449/1980/Superalloys_1980_205_21410.7449/1980/Superalloys_1980_205_214 ↗
6. Ross EW, O'Hara KS: ‘Rene N4: a first generation single crystal turbine airfoil alloy with improved oxidation resistance, low angle boundary strength superior long time rupture strength’, Proc. 8th Int. Symp. on ‘Superalloys 1996’, Champion, PA, USA, September 1996, TMS, 19–25.10.7449/1996/Superalloys_1996_19_25 ↗
7. Kear BH · Trans. Metall. Soc. AIME · 1967 · 239 · 1209
8. 10.7449/2008/Superalloys_2008_443_45110.7449/2008/Superalloys_2008_443_451 ↗
9. 10.1016/0025-5416(70)90050-910.1016/0025-5416(70)90050-9 ↗
10. 10.1016/S0921-5093(00)01318-610.1016/S0921-5093(00)01318-6 ↗
11. 10.1179/mst.1986.2.5.44210.1179/mst.1986.2.5.442 ↗
12. 10.1016/S0921-5093(99)00701-710.1016/S0921-5093(99)00701-7 ↗
13. 10.1016/j.msea.2005.08.15410.1016/j.msea.2005.08.154 ↗
14. 10.1179/136404609X36731710.1179/136404609X367317 ↗
15. 10.1007/s12540-009-0391-210.1007/s12540-009-0391-2 ↗
16. 10.7449/2008/Superalloys_2008_367_37410.7449/2008/Superalloys_2008_367_374 ↗
17. 10.1007/BF0283035110.1007/BF02830351 ↗
18. 10.1007/BF0264760510.1007/BF02647605 ↗
19. 10.1007/BF0283035010.1007/BF02830350 ↗
20. 10.1016/0025-5416(84)90210-610.1016/0025-5416(84)90210-6 ↗
21. Walton D · Trans. Metall. Soc. AIME · 1959 · 215 · 447
22. 10.7449/2008/Superalloys_2008_317_32410.7449/2008/Superalloys_2008_317_324 ↗
23. 10.1016/j.actamat.2008.02.02210.1016/j.actamat.2008.02.022 ↗
24. Zhao XB: ‘Crystal orientation of single crystal superalloys under high thermal gradient directional solidification’, PhD thesis, Northwestern Polytechnical University, Xi'an, China, 2010.
25. 10.1007/BF0264895610.1007/BF02648956 ↗