journal article·2023-03

Microstructure evolution and microhardness of thermal-simulated HAZ in Fe–Mn–Al–C steel

Mei Xing, Ya-xiong Wan, Xiao-feng Zhang, Fang-min Lin, Peng-yan Zhang, Zhen-yi Huang

Materials Science and Technology· Volume 39· Issue 5
Publisher page

Abstract

The microstructure evolution and microhardness of Fe–Mn–Al–C steel heat-affected zone (HAZ) were investigated systematically using the weld thermal simulation technique. The results illustrated that the microstructure in HAZ with different peak temperatures (600, 800, 1000 and 1300°C) and heat inputs (10, 20 and 30 kJ cm –1 ) mainly consisted of ferrite and austenite. When the peak temperature was 1300°C, there are many high-angle grain boundaries which may inhibit crack propagation. With the increase in heat input, κappa carbide precipitation increased, the grain size became finer and microhardness increased. The microhardness was 438 HV when the peak temperature was 1300°C at 30 kJ cm –1 . Highlights The welding of high carbon, high aluminium and low-density steel was simulated. The HAZ was composed of austenite and a small amount of high-temperature δ-ferrite. The proportion of high- and low-angle grain boundaries has a great influence on the mechanical properties. The welding heat input was 30 kJ cm –1 , the grain size of the HAZ decreased and microhardness was the largest.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Anhui Province Key Laboratory of Metallurgical Engineering & Resources Recycling, Anhui University of Technology, Ma'anshan, People's Republic of China

School of Metallurgical Engineering, Anhui University of Technology, Ma'anshan, People's Republic of China

Funding

National Natural Science Fund · Anhui Provincial Natural Science Foundation · Natural Science Research Project of Colleges of Anhui Provincial Education Department

References (44)

Show source-provided references
1. Howell RA, Van Aken DC. A literature review of age hardening Fe-Mn-Al-C alloys[J]. Iron Steel Tech. 2009;6:193–212.
2. 10.1088/1468-6996/14/1/01420510.1088/1468-6996/14/1/014205 ↗
3. 10.1002/srin.20060644010.1002/srin.200606440 ↗
4. 10.1361/10599490077034543010.1361/105994900770345430 ↗
5. 10.2355/isijinternational.50.89310.2355/isijinternational.50.893 ↗
6. 10.1007/s11837-014-1032-x10.1007/s11837-014-1032-x ↗
7. 10.1016/j.actamat.2020.08.00310.1016/j.actamat.2020.08.003 ↗
8. 10.1007/s11661-020-05947-210.1007/s11661-020-05947-2 ↗
9. 10.1016/j.jmrt.2020.02.08810.1016/j.jmrt.2020.02.088 ↗
10. 10.1016/j.scriptamat.2012.11.03710.1016/j.scriptamat.2012.11.037 ↗
11. 10.1007/s11661-004-0025-810.1007/s11661-004-0025-8 ↗
12. 10.1016/0001-6160(84)90234-710.1016/0001-6160(84)90234-7 ↗
13. Easterling K. Introduction to the physical metallurgy of welding[M]. Elsevier; 2013.
14. Kou S. Welding metallurg. New York: John Wiley; 2003.
15. 10.1007/s10853-014-8586-410.1007/s10853-014-8586-4 ↗
16. Tjong S, Zhu S, Ho N Solidification microstructure and creep rupture behaviour of electron beam welded austenitic Fe-28M-6Al-1C alloy. Mater SciTechnol. 1997;13:251–256.
17. 10.1007/BF0035622310.1007/BF00356223 ↗
18. 10.1016/j.matchemphys.2019.12190410.1016/j.matchemphys.2019.121904 ↗
19. 10.5781/JWJ.2017.35.1.910.5781/JWJ.2017.35.1.9 ↗
20. 10.1051/metal/201904310.1051/metal/2019043 ↗
21. 10.1016/j.msea.2018.04.08810.1016/j.msea.2018.04.088 ↗
22. 10.1016/j.msea.2018.10.12510.1016/j.msea.2018.10.125 ↗
23. Jeong S, Park G, Kim B. Heat-Affected Zone Characteristics with Post-Weld Heat Treatments in Austenitic Fe–Mn–Al–C Lightweight Steels[J]. Met Mater Int. 2022: 1–10.
24. 10.1002/srin.20210022910.1002/srin.202100229 ↗
25. Rykalin RR. Energy source for welding. Weld World. 1974;12:227–248.
26. 10.1016/j.matdes.2021.11033610.1016/j.matdes.2021.110336 ↗
27. 10.1016/0001-6160(82)90100-610.1016/0001-6160(82)90100-6 ↗
28. 10.1016/S1359-6454(03)00090-910.1016/S1359-6454(03)00090-9 ↗
29. 10.1016/j.jmapro.2021.06.00310.1016/j.jmapro.2021.06.003 ↗
30. 10.1016/S0924-0136(01)00797-X10.1016/S0924-0136(01)00797-X ↗
31. 10.3390/ma1411298110.3390/ma14112981 ↗
32. 10.1016/0956-716X(94)90610-610.1016/0956-716X(94)90610-6 ↗
33. 10.1007/s11837-014-1032-x10.1007/s11837-014-1032-x ↗
34. 10.1016/j.actamat.2012.05.01710.1016/j.actamat.2012.05.017 ↗
35. 10.1016/j.jmrt.2021.06.06210.1016/j.jmrt.2021.06.062 ↗
36. 10.1016/j.jallcom.2015.06.04810.1016/j.jallcom.2015.06.048 ↗
37. 10.1007/s11661-014-2187-310.1007/s11661-014-2187-3 ↗
38. 10.1007/s12540-010-1202-510.1007/s12540-010-1202-5 ↗
39. 10.1016/S1359-6462(01)01142-310.1016/S1359-6462(01)01142-3 ↗
40. 10.1016/j.actamat.2017.08.04910.1016/j.actamat.2017.08.049 ↗
41. 10.1016/j.msea.2016.07.02910.1016/j.msea.2016.07.029 ↗
42. 10.1016/j.msea.2013.07.02310.1016/j.msea.2013.07.023 ↗
43. 10.1007/s12540-018-0089-410.1007/s12540-018-0089-4 ↗
44. 10.1016/j.matchar.2019.10981810.1016/j.matchar.2019.109818 ↗