journal article·2017-07

The effect of deformation-induced-ferrite-transformation on nanometre-sized carbides in Ti–Mo ferritic steel

Zhen Ning, Qingwu Cai, Baosheng Xie, Entao Dong

Materials Science and Technology· Volume 33· Issue 10
Publisher page

Abstract

In this study, the effect of deformation-induced-ferrite-transformation (DIFT) rolling on precipitation in Ti–Mo ferrite matrix micro-alloyed steel was investigated by comparing to rolling in austenite non-recrystallisation region. The precipitate volume fraction and precipitation-starting time-temperature (PTT) curves under two kinds of process were calculated by thermodynamic and kinetic calculation, and the effects of non-recrystallisation rolling and DIFT rolling on the contribution of strengthening mechanisms were quantitatively analysed. The results showed that comparing with rolling in the austenite non-recrystallisation region, carbides in the steel by DIFT rolling were finer and more uniform. Moreover, DIFT rolling could enhance fine grain strengthening and precipitation strengthening simultaneously, and the increments of fine grain and precipitation strengthening were 34 and 63.7 MPa, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing, People's Republic of China

Funding

National Natural Science Foundation of China

References (22)

Show source-provided references
1. Duan XG · Acta Metall Sin · 2011 · 47 · 251
2. 10.2355/isijinternational.44.194510.2355/isijinternational.44.1945 ↗
3. 10.3724/SP.J.1037.2012.0034810.3724/SP.J.1037.2012.00348 ↗
4. 10.4028/www.scientific.net/MSF.539-543.481310.4028/www.scientific.net/MSF.539-543.4813 ↗
5. 10.1016/j.msea.2007.11.11010.1016/j.msea.2007.11.110 ↗
6. 10.1016/j.msea.2012.12.05510.1016/j.msea.2012.12.055 ↗
7. 10.1016/j.msea.2014.03.05410.1016/j.msea.2014.03.054 ↗
8. 10.1016/j.msea.2014.07.07710.1016/j.msea.2014.07.077 ↗
9. 10.1016/0956-7151(92)90006-Z10.1016/0956-7151(92)90006-Z ↗
10. 10.1016/j.cossms.2006.02.01410.1016/j.cossms.2006.02.014 ↗
11. 10.1179/174328006X10253810.1179/174328006X102538 ↗
12. 10.4028/www.scientific.net/MSF.561-565.249110.4028/www.scientific.net/MSF.561-565.2491 ↗
13. GB/T 228.1-2010, Metallic materials-tensile testing-part 1: method of test at room temperature, 2011.
14. Xu ZY · 2000
15. 10.1179/174328406X8389710.1179/174328406X83897 ↗
16. 10.2355/isijinternational.32.32610.2355/isijinternational.32.326 ↗
17. 10.1007/BF0266758610.1007/BF02667586 ↗
18. 10.2355/isijinternational.32.26110.2355/isijinternational.32.261 ↗
19. Yong QL · 2006
20. 10.1007/BF0280436010.1007/BF02804360 ↗
21. 10.1016/j.actamat.2011.06.03710.1016/j.actamat.2011.06.037 ↗
22. Pickering FB · 1978