Improvement of Charpy impact properties in heat affected zones of API X80 pipeline steels containing complex oxides
Source abstract
Abstract
The present study aimed at investigating the improvement of Charpy impact properties in heat affected zones (HAZs) of API X80 pipeline steels containing complex oxides. Three kinds of steels were fabricated by adding Ti, Al and Mg to form complex oxides and their microstructures, tensile properties and Charpy impact properties were investigated. The number of complex oxides increased as the excess amount of Ti, Al and Mg was included in the steels. After the HAZ simulation test, the steel having a number of oxides contained about 72 vol.-% of acicular ferrite in the simulated HAZ, together with bainitic ferrite and granular bainite, whereas the HAZ microstructures of the conventional steels consisted of bainitic ferrite and granular bainite with a small amount of acicular ferrite. The volume fraction of acicular ferrite increased as the amount of complex oxides increased and the heat input decreased, and thus, Charpy impact properties of the oxide containing steel HAZs were greatly improved over those of the conventional steel HAZs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Advanced Aerospace MaterialsPohang University of Science and Technology, Pohang 790-784, Korea
Steelmaking Research GroupTechnical Research Laboratories, POSCO, Pohang 790-785, Korea
Steel Solutions Research GroupTechnical Research Laboratories, POSCO, Pohang 790-785, Korea
Center for Advanced Aerospace MaterialsPohang University of Science and Technology, Pohang 790-784, Korea;, Email: shlee@postech.ac.kr
References (22)
Show source-provided references
1. Dye S. A. · Met. Construct. Br. Weld J · 1970 · 2 · 111
2. Fairchild D. P., Macia M. L., Papka S. D., Petersen C. W., Stevens J. H., Barbas S. T., Bangaru N. V., Koo J. Y., and Luton M. J.: Proc. Int. Pipe Dreamer's Conf., Yokohama, Japan, November 2002, Scientific Surveys, Ltd, Paper 307.
3. Corbett K. T. · Int. J. Offshore Polar Eng · 2004 · 14 · 75
4. Koo J. Y., Luton M. J., Bangaru N. V., Petkovic R. A., Fairchild D. P., Petersen C. W., Asahi H., Hara T., Terada Y., Sugiyama M., Tamehiro H., Komizo Y., Okaguchi S., Hamada M., Yamamoto A., and Takeuchi I.: Proc. 13th Int. Offshore and Polar Engineering Conf., Honolulu, HI, USA, May 2003, ISOPE, Paper 10.
5. Denys R. ‘Pipeline technology’, 1; 2000, Amsterdam, Elsevier.
6. 10.3365/met.mat.2008.08.52310.3365/met.mat.2008.08.523 ↗
7. 10.1007/BF0302787710.1007/BF03027877 ↗
8. Takamura J., and Mizoguchi S.: Proc. 6th Int. Iron Steel Cong., Nagoya, Japan, October 1990, ISIJ, Paper 591.
9. 10.2320/materia.36.93710.2320/materia.36.937 ↗
10. 10.1179/mst.1989.5.11.105710.1179/mst.1989.5.11.1057 ↗
11. 10.1007/BF0054036910.1007/BF00540369 ↗
12. Bhadeshia H. K. D. H. ‘Bainite in steels’, 2nd edn, 237; 1992, London, Institute of Materials.
13. Japan Welding Engineering Society: ‘Weldable high strength steel plates’, 3001; 1996, Japan, JWES.
14. Tamura I., Sekine H., Tanaka T., and Ouchi C. ‘Thermomechanical processing of high-strength low-alloy steels’, 80; 1988, London, Butterworth & Co., Ltd.10.1016/B978-0-408-11034-1.50007-6 ↗
15. 10.1007/s11661-003-0010-710.1007/s11661-003-0010-7 ↗
16. Hong K. J. · J R&D · 2006 · 20 · 211
17. ‘Standard test method for notched bar impact testing of metallic materials’, E 23-06, ASTM, West Conshohocken, PA, USA, 2006.
18. 10.1016/B978-0-08-022714-6.50009-510.1016/B978-0-08-022714-6.50009-5 ↗
19. 10.1007/BF0302781310.1007/BF03027813 ↗
20. Kim Y. M. · 2005 · POSTECH
21. Krauss G., and Thompson S. W.: ISIJ Int. 1995, 35, 937–945.10.2355/isijinternational.35.937 ↗
22. 10.1016/S0921-5093(03)00477-510.1016/S0921-5093(03)00477-5 ↗