Effect of strain rate on acoustic emission during tensile deformation of α-brass
Source abstract
Abstract
In the present investigation, acoustic emission (AE) technique has been used to study the effect of variation in strain rate on AE signals during tensile deformation of α-brass. Tensile tests have been carried out at four different strain rates, i.e. 3·33×10−4, 6·66×10−4, 1·33×10−3 and 2×10−3 s−1 with simultaneous monitoring of AE parameters. Results indicated that the intensity of AE signals increased with increase in strain rate, which had been attributed to the combined effect of dislocation motion and twinning. Optical microscopy results of deformed samples showed an increase in twin density, i.e. the number of twins per unit area with that of strain rate, which had a profound effect on AE cumulative counts. The fracture surface analysis of deformed sample by field emission scanning electron microscopy showed a transition from ductile to brittle behaviour with increase in the value of strain rate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Science · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Surface Engineering Department CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha, India
References (17)
Show source-provided references
1. Liptai RG, Harris DO, Tatro CA: ASTM STP 505, ASTM, Philadelphia, PA, USA, 1972, 3–10.10.1520/STP35377S ↗
2. Beattie AG · J. Acoust. Emiss. · 1983 · 2 · 95
3. Schofield BH: ASTM STP 505, ASTM, Philadelphia, PA, USA, 1972, 11–19.
4. Raj B, Jayakumar T:‘Acoustic emission during tensile deformation and fracture in austenitic alloys’, ASTM-STP-1077(, Sachse W, et al.), 218; 1991, Philadelphia, PA, ASTM.10.1520/STP19096S ↗
5. Mukhopadyay CK · 1998
6. 10.1016/S0921-5093(00)01042-X10.1016/S0921-5093(00)01042-X ↗
7. Dunegan HL, Green AT: ASTM STP 505, ASTM, Philadelphia, PA, USA, 1972, 100–113.10.1520/STP35383S ↗
8. 10.1179/02670830422502220510.1179/026708304225022205 ↗
9. 10.1016/j.msea.2011.02.04210.1016/j.msea.2011.02.042 ↗
10. Tyler DE, Black WT: ‘Introduction to copper and copper alloys’, in ‘ASM metals handbook’, Vol. 2, 759; 1992, Materials Park, OH, ASM.
11. 10.1080/09349847.2011.62206810.1080/09349847.2011.622068 ↗
12. 10.1016/j.msea.2004.01.07410.1016/j.msea.2004.01.074 ↗
13. 10.1016/j.actamat.2006.06.03310.1016/j.actamat.2006.06.033 ↗
14. 10.1016/j.phpro.2010.01.10210.1016/j.phpro.2010.01.102 ↗
15. 10.1016/j.msea.2003.09.10010.1016/j.msea.2003.09.100 ↗
16. Dieter GE: ‘Mechanical metallurgy’; 1990, New Delhi, Tata MacGraw Hill.
17. 10.1063/1.173565510.1063/1.1735655 ↗