journal article·2022-01

Properties of TiC p /Cu composites fabricated by powder metallurgy and electrodeless copper plating

Dong-Dong Zhang, Xi-Ya He, Hua Zhao, Ya-Li Gao

Materials Science and Technology· Volume 38· Issue 1
Publisher page

Abstract

In situ spherical TiC p -reinforced copper matrix composites were prepared via hot-pressing sintering assisted with copper plating. Brinell hardness and electrical conductivity of composites with various contents were investigated, room temperature compression properties and fractography of optimal TiC p /Cu composites and sintered pure copper were analysed. It was found that with the increase of TiC p content, Brinell hardness of composites was increased, while electrical conductivity decreased. When TiC p content was 1.0 wt-%, the Brinell hardness increased significantly and the conductivity was maintained at a high level. Compared with sintered pure copper, the yield strength and ultimate compressive strength of the composites were improved, while the fracture strain was reduced.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Northeast Electric Power University, Jilin, People's Republic of China

Gongqing Institute of Science and Technology, Gongqing, People's Republic of China

Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, P. R. China

References (30)

Show source-provided references
1. 10.1016/j.matdes.2014.09.02510.1016/j.matdes.2014.09.025 ↗
2. 10.1016/j.jallcom.2015.10.06110.1016/j.jallcom.2015.10.061 ↗
3. 10.1016/j.powtec.2016.06.04510.1016/j.powtec.2016.06.045 ↗
4. 10.1016/j.jmst.2018.05.02010.1016/j.jmst.2018.05.020 ↗
5. 10.1016/j.msea.2017.01.05210.1016/j.msea.2017.01.052 ↗
6. 10.1016/j.carbon.2015.10.02310.1016/j.carbon.2015.10.023 ↗
7. 10.1016/j.vacuum.2017.12.03510.1016/j.vacuum.2017.12.035 ↗
8. 10.1007/s40195-014-0158-810.1007/s40195-014-0158-8 ↗
9. 10.1016/j.powtec.2017.07.03610.1016/j.powtec.2017.07.036 ↗
10. 10.1016/j.powtec.2017.08.01910.1016/j.powtec.2017.08.019 ↗
11. 10.1016/j.vacuum.2018.10.05410.1016/j.vacuum.2018.10.054 ↗
12. 10.1016/j.matdes.2019.10803010.1016/j.matdes.2019.108030 ↗
13. 10.1016/j.msea.2017.12.07110.1016/j.msea.2017.12.071 ↗
14. 10.1016/j.jmrt.2020.02.01310.1016/j.jmrt.2020.02.013 ↗
15. 10.1016/j.compositesb.2020.10829110.1016/j.compositesb.2020.108291 ↗
16. 10.1016/j.ceramint.2019.03.04310.1016/j.ceramint.2019.03.043 ↗
17. 10.1016/j.compositesb.2017.05.03510.1016/j.compositesb.2017.05.035 ↗
18. 10.1016/j.rinp.2018.02.05910.1016/j.rinp.2018.02.059 ↗
19. 10.1016/j.pnsc.2016.11.01310.1016/j.pnsc.2016.11.013 ↗
20. 10.1016/j.ceramint.2018.08.31610.1016/j.ceramint.2018.08.316 ↗
21. 10.1016/j.jmrt.2020.07.06310.1016/j.jmrt.2020.07.063 ↗
22. 10.1016/j.matchemphys.2012.09.00710.1016/j.matchemphys.2012.09.007 ↗
23. 10.1016/j.jallcom.2016.03.08510.1016/j.jallcom.2016.03.085 ↗
24. 10.1016/j.jallcom.2016.12.01810.1016/j.jallcom.2016.12.018 ↗
25. 10.1016/j.jallcom.2018.04.32710.1016/j.jallcom.2018.04.327 ↗
26. 10.1016/j.vacuum.2020.10954410.1016/j.vacuum.2020.109544 ↗
27. 10.1038/s41598-020-69105-910.1038/s41598-020-69105-9 ↗
28. 10.1016/j.msea.2015.09.11110.1016/j.msea.2015.09.111 ↗
29. 10.1016/j.matdes.2012.03.05010.1016/j.matdes.2012.03.050 ↗
30. 10.1016/j.jallcom.2018.08.11610.1016/j.jallcom.2018.08.116 ↗