Simulation, analysis and validation of residual stresses on LY2 aluminium alloy by laser shock processing with elliptical spot
Source abstract
Abstract
The effects of laser shock processing on the residual stresses of the LY2 aluminium alloy samples with elliptical spot (long axis length, 12 mm; short axis length, 3 mm) were experimentally investigated, and the effects of the overlapping rate on the residual stresses were simulated using the Abaqus software. The simulated residual stresses were basically in agreement with the measured data, and the relationship between the magnitude and uniformity of residual stress and the overlapping rate was also addressed. Results show that the largest stress magnitudes are located on the top surface of the sample, and the greatest uniformity is achieved by the overlapping of elliptical laser spots. The overlapping rate is critical for the uniformity of the residual stress across the surface. Within a certain impact number range of one to four times, increasing the shocked number can increase the magnitude of residual stress near the surface but not effectively increase the plastically affected depth.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal and Thin Film Mechanics · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangsu Provincial Key Laboratory for Science and Technology of Photon Manufacturing, Jiangsu University, Xuefu Road 301, Jingkou District, Zhenjiang 212013, China
References (24)
Show source-provided references
1. 10.1088/0022-3727/40/21/03810.1088/0022-3727/40/21/038 ↗
2. 10.1016/S0142-1123(02)00022-110.1016/S0142-1123(02)00022-1 ↗
3. 10.1007/s00339000053310.1007/s003390000533 ↗
4. 10.1016/j.jmatprotec.2007.11.14710.1016/j.jmatprotec.2007.11.147 ↗
5. 10.1016/j.msea.2004.07.02510.1016/j.msea.2004.07.025 ↗
6. 10.1063/1.236403710.1063/1.2364037 ↗
7. 10.1016/j.scriptamat.2007.12.02310.1016/j.scriptamat.2007.12.023 ↗
8. 10.1016/S0257-8972(97)00009-110.1016/S0257-8972(97)00009-1 ↗
9. 10.1016/j.ijfatigue.2007.01.03310.1016/j.ijfatigue.2007.01.033 ↗
10. Dane C. B. · Adv. Mater. Process. · 1997 · 5 · 13
11. Vaccari J. A. · Am. Mach. · 1992 · 6 · 62
12. 10.1179/02670849910151684910.1179/026708499101516849 ↗
13. 10.1179/02670840322500756310.1179/026708403225007563 ↗
14. 10.1016/j.surfcoat.2006.02.01810.1016/j.surfcoat.2006.02.018 ↗
15. 10.1016/S0921-5093(03)00069-810.1016/S0921-5093(03)00069-8 ↗
16. 10.1016/j.scriptamat.2004.02.01210.1016/j.scriptamat.2004.02.012 ↗
17. 10.1016/S1006-7191(08)60029-010.1016/S1006-7191(08)60029-0 ↗
18. Evans A. D., Bruno G., King A., and Withers P. J. ‘Laser shock peening for aerospace Ti–6Al–4V alloy: a residual stress study’, Annual Report of the Institut Laue-Langevin (ILL), Grenoble, France, ILL, 2002, 42–43.
19. Clauer H. A., Walters C. T., and Ford S. C. ‘The effects of laser shock processing on the fatigue properties of -T3 aluminum’, in ‘Lasers in materials processing’, (ed. Metzbower E. A.), 7–22; 1983, Metals Park, OH, American Society for Metals.
20. 10.1007/BF0032647710.1007/BF00326477 ↗
21. 10.1016/S0921-5093(00)01264-810.1016/S0921-5093(00)01264-8 ↗
22. Abaqus, Inc. ‘Abaqus user's manual’, Ver. 6.4; 2003, Pawtucket, RI, Abaqus, Inc.
23. 10.1179/02670840322500256810.1179/026708403225002568 ↗
24. 10.1016/S0043-1648(03)00405-810.1016/S0043-1648(03)00405-8 ↗