Application of a mathematical model to multipass hot deformation of aluminium alloy AA5083
Source abstract
Abstract
Sheet metal forming operations are used extensively in industry to alter the shape of the metal through plastic deformation. A critical step in the sheet manufacturing process is hot rolling which reduces the thickness of the ingot and can significantly impact the final sheet properties based on the microstructure evolution during this operation. A two-dimensional mathematical model was developed and experimentally validated to simulate deformation and microstructure evolution during multipass hot rolling for an AA5083 aluminium alloy. The details of model development and experimental validation can be found in earlier work. In this article, the application of the validated model to further understand and optimise the material stored energy and ensuing microstructure during multipass hot rolling is described. Specifically, the model was employed to examine the effect of changing the number of rolling passes as well as strain partitioning during multipass rolling on the material stored energy and the resulting microstructure. Results indicate that the number of passes has a significant effect on the stored energy which increases as the number of passes increases. In addition within a multipass rolling schedule the way in which the strain is partitioned is also shown to have an effect on the stored energy with a decreasing strain/pass schedule providing the highest material stored energy after rolling is complete. In contrast an increasing strain/pass schedule provides the lowest stored energy in the material after rolling. This overall effect is attributed to the differences in strip temperature as the lowest exit temperature strip has the highest stored energy. The model was further utilised to generate operational curves to predict the material stored energy and subsequent recrystallisation under different rolling conditions, namely at different interpass times and total strains for various start deformation temperatures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Ahmed H. · 2005
2. Ahmed H. · Mater. Sci. Eng. A, 2005, A390 · 278
3. 10.1007/s11661-007-9101-110.1007/s11661-007-9101-1 ↗
4. Ahmed H., Wells M. A., Maijer D. M., and van der Winden M. R.: Proc. Symp. on ‘Hot deformation of aluminum alloys III’, San Diego, CA, USA, March 2003, TMS, 109–123.
5. Hirsch J. · Aluminium · 2004 · 80 · 553
6. Humphreys F. J., and Hatherly M. ‘Recrystallization and related annealing phenomena’, 363; 1996, NewYork, Pergamon Press.10.1016/B978-0-08-041884-1.50018-0 ↗
7. Marshall G. J. · Mater. Sci. Forum · 1996 · 19 · 217
8. Marthinsen K. · Aluminium · 2004 · 80 · 729
9. Puchi E. S. · Proc. Int. Conf. on ‘Thermomechanical processing of steels and other materials’, Tokyo, Japan, June 1988, The Iron and Steel Institute of Japan, · 572
10. VAT rolling technology report, Private communication.
11. 10.1179/mst.1990.6.11.107210.1179/mst.1990.6.11.1072 ↗
12. Sellars C. M. · Proc. Int. Conf. on ‘Thermomechanical processing of steels and other materials’, Wollongong, Australia, July 1997, TMS, · 3
13. 10.1179/msc.1979.13.3-4.18710.1179/msc.1979.13.3-4.187 ↗
14. Sellars C. M. · Proc. Symp. on ‘Hot deformation of aluminum alloys II’, Rosemont, IL, USA, October 1998, TMS, · 185
15. van der Winden M. R. ‘Laboratory simulation and modelling of the break-down rolling of AA3104’, PhD thesis, Sheffield University, Sheffield, UK, 1999
16. Vatne H. E. · 1995
17. 10.1007/BF0259566110.1007/BF02595661 ↗
18. Wells M. A. · 1995
19. 10.1007/s11663-998-0097-810.1007/s11663-998-0097-8 ↗
20. 10.1179/02670830322501071310.1179/026708303225010713 ↗
21. Zurob H. S., Hutchinson C. R., Brechet Y., and Purdy G.: Acta Mater. 2002, 50, 3075–3092.10.1016/S1359-6454(02)00097-6 ↗