journal article·2014-07

Effect of nickel and vanadium on iron bearing intermetallic phases in AA 5657 simulated DC castings

Z. Zhang, G. Li, X-G. Chen

Materials Science and Technology· Volume 30· Issue 8
Publisher page

Abstract

The effect of Ni and V trace additions at various levels on the transition and distribution of Fe bearing intermetallic phases on AA 5657 was investigated with a direct chill casting simulator. Phase identification and quantification were performed using a combination of SEM, electron backscattered diffraction, energy dispersive spectrum and image analysis techniques to accurately evaluate the effect of Ni and V on ingot microstructures. The Ni addition promotes Al3Fe and α-AlFeSi while suppressing AlmFe. At high Ni levels, a new Ni rich AlFeNi phase was observed. On the other hand, V strongly encourages AlmFe and lowers the critical cooling rates of the phase formation. However, at low Ni or V levels (70–150 and 170–240 ppm respectively), the effect of Ni and V on phase selection is still weak and may not significantly affect the material properties. A counteractive effect of the combined Ni and V additions on the phase selection was observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Applied Science, University of Quebec at Chicoutimi, Saguenay, Que. G7H 2B1, Canada

References (26)

Show source-provided references
1. Westengen H · Aluminum · 1982 · 57 · 398
2. 10.1016/S0079-6425(98)00003-610.1016/S0079-6425(98)00003-6 ↗
3. Aliravci CA, Gruzleski JE and Pekguleryuz MO: ‘A thermodynamic study of metastable Al–Fe phase formation in direct chill (DC) cast aluminum alloy ingots’, (ed. Welch B), Proc. Light Metal, TMS Annual Meet. 1998, San Antonio, TX, USA, February 1998, TMS, 1381–1389.
4. 10.2464/jilm.25.4810.2464/jilm.25.48 ↗
5. Furu T and Vatne HE: ‘Effect of as-cast microstructure and subsequent processing on banding in rolled Al sheets’, (ed. Eckert C E), Proc. Light Metal, TMS Annual Meet. 1999, San Diego, CA, USA, February 1999, TMS, 749–754.
6. Chen X.G: ‘Effect of grain refiners on intermetallic phases in AA1XXX simulated castings’, (ed. Eckert C E), Proc. Light Metal, TMS Annual Meet. 1999, San Diego, CA, USA, February 1999, TMS, 803–809.
7. 10.4028/www.scientific.net/MSF.693.14910.4028/www.scientific.net/MSF.693.149 ↗
8. Grandfield JF and Taylor JA: ‘The impact of rising Ni and V impurity levels in smelter grade aluminium and potential control strategies’, in ‘Aluminium cast house technology 2009’, (ed. Grandfield J F et al.), 129–136; 2009, Transtech Publications. Durnten, Zurich, Switzerland.10.4028/www.scientific.net/MSF.630.129 ↗
9. Mages SJ, Cochrane RF, Flood SC and Evans PV: ‘The effect of trace elements on intermetallic phase selection in simulated DC castings’, (ed. Evans J), Proc. Light Metal, TMS annual Meeting 1995, Point Clear, CA, USA, November 1995, TMS, 1039–1047.
10. 10.1007/s11661-011-0764-210.1007/s11661-011-0764-2 ↗
11. 10.1016/S1359-6454(99)00250-510.1016/S1359-6454(99)00250-5 ↗
12. Chen X.G: ‘Growth mechanisms of intermetallic phases in DC cast AA1xxx alloys’, (ed. Welch B), Proc. Light Metal, TMS Annual Meet. 1998, San Antonio, TX, USA, February 1998, TMS, 1071–1076.
13. 10.1007/BF0282570010.1007/BF02825700 ↗
14. 10.1007/BF0048727310.1007/BF00487273 ↗
15. 10.1016/S1044-5803(96)00046-010.1016/S1044-5803(96)00046-0 ↗
16. 10.1016/j.scriptamat.2004.04.01510.1016/j.scriptamat.2004.04.015 ↗
17. 10.1016/j.jallcom.2009.09.18110.1016/j.jallcom.2009.09.181 ↗
18. Zhang Z, Li G and Chen X.G: ‘Identification and distribution of Fe intermetallic phases in AA5657 DC cast ingots’, Proc. 13th Int. Conf. on ‘Aluminum alloys’, Pittsburgh, PA, USA, June 2012, TMS, 1857–1863.10.1007/978-3-319-48761-8_278 ↗
19. Villars P and D Calvert L: ‘Pearson's handbook of crystallographic data for intermetallic phases’; 1991, Materials Park, OH, ASM International.
20. 10.1107/S010876818800524510.1107/S0108768188005245 ↗
21. Oxford Instruments HKL: ‘NKL Channel 5’, 5.27, 2006, Oxford Instruments HKL, Majsmarken, Denmark.
22. Gokhale AM: ‘Quantitative characterization and representation of global microstructure geometry’, Vol. 9, ‘Metallography and microstructures’, in ‘ASM handbook’, (ed. Voort G), 428–447; 2004, Materials Park, OH, ASM International.10.31399/asm.hb.v09.a0003759 ↗
23. Voor GFV: ‘Color metallography’, Vol. 9, ‘Metallography and microstructures’, in ‘ASM handbook’, (ed. Voort G F V), 535; 2004, Materials Park, OH, ASM international.
24. Kaufman L: Thermo-Calc Software (private database), 2004.
25. Meredith MW, Greer AL and Evans PV: ‘The effect of grain additions on intermetallic selection in dilute aluminium alloys’, (ed. Welch B), Proc. Light Metal, TMS Annual Meet. 1998, San Antonio, TX, USA, February 1998, TMS, 977–982.
26. Flemings MC: ‘Solidification process’, 295–300; 1974, New York, McGraw-Hill Book Company.