Sputter alloying of Ni, Ti and Hf for fabrication of high temperature shape memory thin films
Source abstract
Abstract
In the present paper, the fabrication and characterisation of typical high temperature Ni(Ti+Hf) alloyed thin films produced by simultaneous sputter deposition from separate elemental Ni, Ti and Hf targets are presented. Film composition, determined by energy dispersive X-ray spectroscopy, was controlled by adjusting the ratio of powers applied to each target. Films deposited at room temperature had an amorphous structure and subsequent annealing at 550°C was carried out in a high vacuum environment, based on crystallisation temperature evaluation by differential scanning calorimetry (DSC). High temperature martensitic transformation, confirmed by DSC and variable temperature X-ray diffraction (XRD), was achieved by deposition of (Ti+Hf) rich Ni–Ti–Hf films. Any slight change of composition towards Ni rich reduced the transformation temperature. Atomic force microscopy and XRD illustrated that the films had a fine grain structure (∼100 nm). One way shape memory effect was observed at ∼200°C in a film with composition of 15·6 at.-%Hf.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Otsuka K. · Frog. Mater. Sci. · 2005 · 50 · 511
2. 10.1016/j.sna.2004.02.01910.1016/j.sna.2004.02.019 ↗
3. Gyobu A., Kawamura Y., Horikawa H., and Saburi T.: Mater. Sci. Eng. A, 1999, A273-275,749–753.10.1016/S0921-5093(99)00409-8 ↗
4. Tuominen S. M.: Proc. 1st Int. Conf. on ‘Shape memory and superelastic technologies’, California, USA, 1994, Asilomar Conference Center, 49.
5. 10.1007/s11837-003-0006-110.1007/s11837-003-0006-1 ↗
6. Olier P. · J. Phys. IV · 1995 · 5 · 741
7. AbuJudom D. N., Thoma P. E., Kao M. Y., and Angst D. R.: US Patent No. 5114504, May 1992.
8. Miyazaki S., and Ishida A.: Mater. Sci. Eng. A, 1999, A273-A275,106–103.
9. Johnson A. D. · J. Phys. IV · 1995 · 5 · 783
10. Gu H. D., Leung K. M., and Chung C. Y.: J. Vac. Sci. Technot A, 1998, A16, (6),3420–3422.10.1116/1.581496 ↗
11. 10.1088/0022-3735/21/11/00510.1088/0022-3735/21/11/005 ↗
12. 10.1116/1.201140410.1116/1.2011404 ↗
13. 10.1016/j.tsf.2005.06.00410.1016/j.tsf.2005.06.004 ↗
14. Sanjabi S., Cao Y. Z., Barber Z. H.: Sens. Actuators A, 2005, A121, (2),543–548.10.1016/j.sna.2005.04.006 ↗
15. Cullity B. D., and Stock S. R. ‘Elements of X-ray diffraction’, 3rd edn, 167-171; 2001, Upper Saddle River, NJ, Prentice-Hall.
16. Melton K. N. · 1990 · 23
17. Angst D. R. · J. Phys. IV · 1995 · 5 · 747
18. Wu K. H., Pu Z., Tseng H. K., and Biancaniello F. S.: Proc. 1st Int. Conf. on ‘Shape memory and superelastic technologies’, CA, USA, 1994, Asilomar Conference Center,61–66.