journal article·2020-09

Effects of TiC formation on the microstructure and hardness of wear-resistant steel

Yongfu Wang, Changlin Yang, Jianbin Li, Yifei Wang, Feng Liu, XiaoKai Liang, Xinjun Sun

Materials Science and Technology· Volume 36· Issue 13
Publisher page

Abstract

In this study, as-cast low alloy wear-resistant steels with Ti contents of 0.6 and 3.0 wt-% were prepared at different solidification cooling rates, and the effects of TiC formation on their microstructures, hardness values, and wear resistances were investigated. The obtained phase diagrams and experimental data revealed that the TiC phase was formed via a divorced eutectic reaction in a residual liquid phase during solidification. The larger Ti content promoted the formation of TiC particles, while the solidification cooling rate represented the main influencing factor. Moreover, the produced TiC phase increased the wear resistance of the studied steel and decreased the matrix hardness, suggesting a new method for enhancing its mechanical properties through the formation of a hard ceramic phase.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, Shanxi, People's Republic of China

CNMC Ningxia Orient Group Co., Ltd., Shizuishan, People's Republic of China

Division of Engineering Steels, Central Iron and Steel Research Institute, Beijing, People's Republic of China

Funding

National Key R&D Program of China

References (30)

Show source-provided references
1. 10.1016/0301-679X(80)90092-410.1016/0301-679X(80)90092-4 ↗
2. Egawa K. · J JSLE Int Edn · 1982 · 3 · 27
3. 10.1016/j.wear.2019.20312010.1016/j.wear.2019.203120 ↗
4. 10.1016/j.wear.2019.20312510.1016/j.wear.2019.203125 ↗
5. 10.1016/j.wear.2017.01.01510.1016/j.wear.2017.01.015 ↗
6. 10.1016/S0043-1648(03)00185-610.1016/S0043-1648(03)00185-6 ↗
7. 10.1016/0043-1648(83)90060-110.1016/0043-1648(83)90060-1 ↗
8. 10.1007/BF0035215910.1007/BF00352159 ↗
9. 10.1016/1359-6454(95)00217-010.1016/1359-6454(95)00217-0 ↗
10. Alman DE, Hawk JA, Petrovic JJ, Hennager CHJr, Singh M. In: Hawk JA, editor. Proceedings of wear of engineering materials. ASM International; 1997. pp. 51–61.
11. 10.1021/acsami.7b1728610.1021/acsami.7b17286 ↗
12. 10.1016/j.optlastec.2018.01.00510.1016/j.optlastec.2018.01.005 ↗
13. 10.1016/j.matdes.2016.02.02210.1016/j.matdes.2016.02.022 ↗
14. 10.1016/j.jallcom.2017.01.14910.1016/j.jallcom.2017.01.149 ↗
15. 10.1016/j.wear.2018.02.00710.1016/j.wear.2018.02.007 ↗
16. Cui C · J Mater Sci Technol · 2000 · 16 · 619
17. 10.1016/S0924-0136(96)00020-910.1016/S0924-0136(96)00020-9 ↗
18. 10.1016/j.jallcom.2017.01.00510.1016/j.jallcom.2017.01.005 ↗
19. 10.1016/j.powtec.2013.06.00210.1016/j.powtec.2013.06.002 ↗
20. 10.1016/j.cej.2014.06.07810.1016/j.cej.2014.06.078 ↗
21. 10.1016/j.wear.2018.06.00810.1016/j.wear.2018.06.008 ↗
22. 10.1361/105994906X10858510.1361/105994906X108585 ↗
23. 10.1179/1879139514Y.000000014010.1179/1879139514Y.0000000140 ↗
24. 10.1016/0921-5093(90)90232-R10.1016/0921-5093(90)90232-R ↗
25. 10.1016/S0301-679X(98)00011-510.1016/S0301-679X(98)00011-5 ↗
26. 10.1016/j.jallcom.2007.05.01810.1016/j.jallcom.2007.05.018 ↗
27. 10.1016/j.msea.2006.12.01310.1016/j.msea.2006.12.013 ↗
28. 10.1016/j.jmatprotec.2007.06.01610.1016/j.jmatprotec.2007.06.016 ↗
29. 10.1016/0364-5916(94)90028-010.1016/0364-5916(94)90028-0 ↗
30. 10.1016/j.matdes.2012.02.02810.1016/j.matdes.2012.02.028 ↗