The microstructure and mechanical properties of the B 4 C/Cu matrix composite fabricated by SPS-HR
Source abstract
Abstract
Copper matrix composites containing different volume fractions of B 4 C particles (0–15%) were first fabricated by spark plasma sintering followed by hot rolling in atmospheric environments, then their microstructures, phase compositions, mechanical properties and sintering mechanism were investigated. It was found that B 4 C particles distributed relatively homogeneously in the copper matrix. Reaction products of CuC 8 and B were observed and identified in the composite. Under increasing B 4 C particle content, the ultimate tensile, yield strength and elongation to fracture of the composites decreased. Failure mode of composites included: (1) the interfacial debonding and (2) the cleavage fracture of copper. Moreover, micro-discharge between the adjacent particles occurred, and its led to local high temperature at the interface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan, People's Republic of China
Shanxi key laboratory of advanced magnesium-based materials, Taiyuan, People's Republic of China
College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, People's Republic of China
Department of Mechanical Engineering, Pennsylvania State University, The Behrend College, Erie, PA, USA
Funding
National Natural Science Foundation of China
References (23)
Show source-provided references
1. 10.1016/j.nucengdes.2014.10.02010.1016/j.nucengdes.2014.10.020 ↗
2. 10.1016/j.msea.2014.10.02510.1016/j.msea.2014.10.025 ↗
3. 10.1016/j.matdes.2016.07.14010.1016/j.matdes.2016.07.140 ↗
4. 10.1016/j.radphyschem.2017.07.01310.1016/j.radphyschem.2017.07.013 ↗
5. 10.1016/j.proeng.2014.12.36810.1016/j.proeng.2014.12.368 ↗
6. 10.1016/j.jnucmat.2005.02.00310.1016/j.jnucmat.2005.02.003 ↗
7. 10.1016/j.jssc.2003.01.00110.1016/j.jssc.2003.01.001 ↗
8. 10.1016/j.jallcom.2018.01.19910.1016/j.jallcom.2018.01.199 ↗
9. 10.1016/j.matlet.2018.01.09710.1016/j.matlet.2018.01.097 ↗
10. 10.1016/j.mspro.2015.11.08010.1016/j.mspro.2015.11.080 ↗
11. 10.1016/j.powtec.2014.03.03410.1016/j.powtec.2014.03.034 ↗
12. 10.1016/j.matdes.2014.04.01610.1016/j.matdes.2014.04.016 ↗
13. 10.1016/j.jnucmat.2013.02.05010.1016/j.jnucmat.2013.02.050 ↗
14. 10.1016/j.msea.2011.02.07910.1016/j.msea.2011.02.079 ↗
15. 10.1016/j.compositesb.2017.05.05510.1016/j.compositesb.2017.05.055 ↗
16. 10.1016/j.ceramint.2016.11.07410.1016/j.ceramint.2016.11.074 ↗
17. 10.1016/j.ceramint.2013.01.02710.1016/j.ceramint.2013.01.027 ↗
18. 10.1016/j.ceramint.2016.10.20210.1016/j.ceramint.2016.10.202 ↗
19. 10.1016/j.matdes.2017.03.05310.1016/j.matdes.2017.03.053 ↗
20. 10.1016/j.msea.2014.06.04410.1016/j.msea.2014.06.044 ↗
21. 10.1016/j.jmatprotec.2011.10.01610.1016/j.jmatprotec.2011.10.016 ↗
22. 10.1016/j.msea.2014.04.06510.1016/j.msea.2014.04.065 ↗
23. 10.1111/j.1551-2916.2005.00777.x10.1111/j.1551-2916.2005.00777.x ↗