journal article·2018-03

Effects of Al–8.5Si–25Cu– x Y filler metal foils on vacuum brazing of SiCp/Al composites

Yueyue Yu, Dongxia Xu, Jinfeng Tian, Dongbin Wang, Peng Wang, Jitai Niu

Materials Science and Technology· Volume 34· Issue 4
Publisher page

Abstract

Rapidly solidified Al–8.5Si–25Cu– xY (wt-%, x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) foils were used as filler metal to braze Al matrix composites with high SiC particle content (SiCp/Al-MMCs), and the filler presented fine microstructure and good wettability on the composites. The joint shear strength first increased, then decreased and a sound joint with a maximum shear strength of 135.32 MPa was achieved using Al–8.5Si–25Cu–0.3Y as the filler metal. After Y exceeded 0.3%, a needle-like intermetallic compound, Al3Y, was found in the brazing seam, resulting in a dramatic decline in the shear strength of the brazed joints. In this research, the Al–8.5Si–25Cu–0.3Y filler metal foil was found to be suitable for the brazing of SiCp/Al-MMCs with high SiC particle content.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo, People's Republic of China

Sanhua Micro Channel Heat Exchanger Co, Ltd, Hangzhou, People's Republic of China

School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, People's Republic of China

Funding

National Natural Science Foundation of China

References (39)

Show source-provided references
1. 10.1007/BF0111387210.1007/BF01113872 ↗
2. 10.1179/imr.1994.39.1.110.1179/imr.1994.39.1.1 ↗
3. 10.1016/S1003-6326(11)61593-810.1016/S1003-6326(11)61593-8 ↗
4. 10.1023/A:102156732977310.1023/A:1021567329773 ↗
5. 10.1016/S1003-6326(14)63159-910.1016/S1003-6326(14)63159-9 ↗
6. Chidambaram S · Indian J Sci Technol · 2015 · 8 · 110.17485/ijst/2015/v8i27/71559 ↗
7. 10.1016/j.jmatprotec.2007.02.02810.1016/j.jmatprotec.2007.02.028 ↗
8. 10.1007/s40195-014-0143-210.1007/s40195-014-0143-2 ↗
9. 10.2320/matertrans.M201429510.2320/matertrans.M2014295 ↗
10. 10.1016/j.jmatprotec.2008.08.01510.1016/j.jmatprotec.2008.08.015 ↗
11. 10.1016/S0266-3538(99)00168-210.1016/S0266-3538(99)00168-2 ↗
12. 10.1016/j.mseb.2011.12.04210.1016/j.mseb.2011.12.042 ↗
13. 10.1016/j.mseb.2012.08.00110.1016/j.mseb.2012.08.001 ↗
14. 10.1016/j.apsusc.2015.07.16410.1016/j.apsusc.2015.07.164 ↗
15. Wang P · Hanjie Xuebao (Trans China Weld Inst) · 2015 · 36 · 43
16. 10.1016/j.matdes.2014.06.03310.1016/j.matdes.2014.06.033 ↗
17. 10.1007/s11661-997-0024-710.1007/s11661-997-0024-7 ↗
18. Wei Yuan YU · Lanzhou, (Trans China Weld Inst) · 2004 · 4 · 69
19. 10.1016/j.jmatprotec.2011.07.01410.1016/j.jmatprotec.2011.07.014 ↗
20. 10.2207/qjjws.12.49510.2207/qjjws.12.495 ↗
21. 10.2464/jilm.43.53310.2464/jilm.43.533 ↗
22. 10.1179/1362171815Y.000000002410.1179/1362171815Y.0000000024 ↗
23. 10.1007/s00339-016-0110-z10.1007/s00339-016-0110-z ↗
24. 10.1016/S1003-6326(13)62857-510.1016/S1003-6326(13)62857-5 ↗
25. 10.1007/s11665-008-9299-010.1007/s11665-008-9299-0 ↗
26. 10.1016/S0925-8388(02)01117-910.1016/S0925-8388(02)01117-9 ↗
27. 10.1007/s11665-013-0476-410.1007/s11665-013-0476-4 ↗
28. 10.1007/s11661-997-0024-710.1007/s11661-997-0024-7 ↗
29. 10.1063/1.32317310.1063/1.323173 ↗
30. 10.1007/s00339-016-0592-810.1007/s00339-016-0592-8 ↗
31. 10.1007/s11665-010-9802-210.1007/s11665-010-9802-2 ↗
32. 10.1016/j.scriptamat.2011.06.03310.1016/j.scriptamat.2011.06.033 ↗
33. 10.1023/A:100446312534010.1023/A:1004463125340 ↗
34. 10.1007/s10853-008-2505-510.1007/s10853-008-2505-5 ↗
35. 10.1007/BF0264620410.1007/BF02646204 ↗
36. Shamsuzzoha M · AFS Trans · 1993 · 100 · 135
37. 10.1016/S1003-6326(14)63025-910.1016/S1003-6326(14)63025-9 ↗
38. 10.1023/A:101794692756610.1023/A:1017946927566 ↗
39. 10.1016/j.msea.2006.10.11410.1016/j.msea.2006.10.114 ↗