journal article·2007-04

Novel sloping plate process for semisolid metal forming

R.-G. Guan, C. Wang, Z.-H. Xing, C.S. Lee, F.-Y. Hu

Materials Science and Technology· Volume 23· Issue 4
Publisher page

Abstract

A novel sloping plate with wavelike surface was used to prepare semisolid alloy. Semisolid billets and slurries have been prepared by cooling or preheating the sloping plate. During preparation of the semisolid alloy by the proposed process, seed crystals derive from burst nucleation and breaking of dendrite and the coaction causes fine spherical microstructure formation. Casting temperature, sloping plate length, degree of cooling sloping angle are the main factors influencing the microstructure. Under current experimental conditions, in order to prepare good quality semisolid billets, proper casting temperature ranges of 660–690°C for Al–3 wt-%Mg alloy and 660–680°C for Al–6Si–2Mg (wt-%) alloy are suggested. The reasonable technological conditions for preparing Al–6Si–2Mg (wt-%) slurry are also proposed: the sloping plate preheating temperature is 300°C, and the casting temperature is 680°C. The optimum conditions for preparing semisolid billet of 1Cr–18Ni–9Ti stainless steel were obtained: the sloping plate length is 640 mm, and the casting temperature is 1600°C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. 10.1007/BF0266109010.1007/BF02661090 ↗
2. 10.1179/imr.1994.39.5.17310.1179/imr.1994.39.5.173 ↗
3. 10.1179/09506600122500107610.1179/095066001225001076 ↗
4. Guan R.G., and Ma W.M. ‘Theory and technology of semisolid metal processing’; 2005, Beijing, Metallurgy Industry Press (in Chinese).
5. Motegi T., Yano E., and Nishikawa N.: Proc. 2nd Int. Conf. on ‘Light materials for transportation systems’ (LiMAT-2001), Pusan, South Korea, May 2001, CAAM,185–190.
6. 10.1016/S0924-0136(02)00765-310.1016/S0924-0136(02)00765-3 ↗
7. 10.1016/j.jmatprotec.2004.04.01810.1016/j.jmatprotec.2004.04.018 ↗
8. Guan R.-G. · in Chinese · 2005 · 26 · 448
9. 10.1179/174328406X8616410.1179/174328406X86164 ↗
10. Guan R.-G. · in Chinese · 2005 · 26 · 867