journal article·2015-12

Mechanical properties and microstructure of Al/Al laminated structure produced via ultrasonic consolidation process

X. -H. He, H. -J. Shi, Y. -D. Zhang, Z. -G. Yang, C. E. Wilkinson, A. L. Neal, M. Norfolk

Materials Science and Technology· Volume 31· Issue 15
Publisher page

Abstract

Mechanical properties of a 2024 aluminium alloy laminated structure produced by the ultrasonic consolidation were investigated. In comparison with the monolithic aluminium alloy, the existence of laminated structure gave different fatigue and fracture mechanisms that associated with the layer interfaces. The Al/Al laminated specimens had the lower tensile strength but much higher fracture toughness than the monolithic Al specimens due to the exit of interface delaminations around the crack tip. The fatigue life of the laminated specimens was comparable to that of the monolithic Al specimens, though the initiation and propagation of the crack in the laminated specimens depended strongly on the microstructure of each material. The interface between layers could arrest the fatigue crack and impede the further propagation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

AML, School of Aerospace, Tsinghua University, Beijing 100084, China

Key Laboratory for Advanced Materials of Ministry of Education, School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China

The Boeing Co., USA

Fabrisonic

References (36)

Show source-provided references
1. 10.1179/imr.1996.41.5.16910.1179/imr.1996.41.5.169 ↗
2. 10.1016/S1044-5803(00)00077-210.1016/S1044-5803(00)00077-2 ↗
3. 10.1179/02670839910150661610.1179/026708399101506616 ↗
4. Liu C. Y. · Mater. Sci. Eng. A · 2012 · 556 · 110.1016/j.msea.2012.06.046 ↗
5. 10.1016/j.msea.2012.11.05210.1016/j.msea.2012.11.052 ↗
6. 10.1016/j.scriptamat.2009.04.03010.1016/j.scriptamat.2009.04.030 ↗
7. 10.1007/s11661-008-9679-y10.1007/s11661-008-9679-y ↗
8. White D. R. · Adv. Mater. Process · 2003 · 161 · 64
9. 10.1016/j.jmatprotec.2009.01.01410.1016/j.jmatprotec.2009.01.014 ↗
10. 10.1115/1.274443110.1115/1.2744431 ↗
11. 10.1016/S0041-624X(99)00174-210.1016/S0041-624X(99)00174-2 ↗
12. 10.1108/1355254071077617910.1108/13552540710776179 ↗
13. 10.1016/j.compstruct.2004.04.06410.1016/j.compstruct.2004.04.064 ↗
14. 10.1016/j.msea.2005.08.04110.1016/j.msea.2005.08.041 ↗
15. 10.1115/1.251545610.1115/1.2515456 ↗
16. 10.1016/S0921-5093(03)00590-210.1016/S0921-5093(03)00590-2 ↗
17. 10.1016/j.jmatprotec.2003.10.01610.1016/j.jmatprotec.2003.10.016 ↗
18. 10.1016/S0278-6125(07)80011-210.1016/S0278-6125(07)80011-2 ↗
19. 10.1007/s11665-008-9342-110.1007/s11665-008-9342-1 ↗
20. 10.1115/1.303094610.1115/1.3030946 ↗
21. 10.1115/1.400207310.1115/1.4002073 ↗
22. 10.1108/1355254121121215910.1108/13552541211212159 ↗
23. 10.1115/1.400526910.1115/1.4005269 ↗
24. 10.1557/jmr.2014.13910.1557/jmr.2014.139 ↗
25. Wolcott P. J. · Proc. SPIE · 2014 · 9059
26. 10.1016/j.jmatprotec.2008.04.01810.1016/j.jmatprotec.2008.04.018 ↗
27. 10.1016/j.msea.2010.03.09410.1016/j.msea.2010.03.094 ↗
28. 10.1007/s11661-011-0805-x10.1007/s11661-011-0805-x ↗
29. 10.1109/ICEPT-HDP.2012.647491010.1109/ICEPT-HDP.2012.6474910 ↗
30. Schick D. E. · Weld. J · 2010 · 89 · 105s
31. 10.1016/j.actamat.2014.04.04310.1016/j.actamat.2014.04.043 ↗
32. 10.1016/j.scriptamat.2009.12.04010.1016/j.scriptamat.2009.12.040 ↗
33. Hahnlen R. · Proc. SPIE · 2009 · 7290 · 1
34. 10.1016/j.ultras.2012.06.00210.1016/j.ultras.2012.06.002 ↗
35. 10.1115/1.360964910.1115/1.3609649 ↗
36. 10.1016/j.matlet.2013.08.09310.1016/j.matlet.2013.08.093 ↗