journal article·2023-02

Indentation size effect in steels with different carbon contents and microstructures

Soumya Sourav Sarangi, Avala Lavakumar, Prince Kumar Singh, Prvan Kumar Katiyar, Ranjit Kumar Ray

Materials Science and Technology· Volume 39· Issue 3
Publisher page

Abstract

Indentation Size Effect (ISE) in steels having a wide spectrum of carbon (C) concentrations (wt-%) 0.002 (interstitial-free), 0.07 (microalloyed), 0.19 (low carbon), 0.32 (medium carbon), and 0.7 (high carbon), and microstructures were investigated using Vickers micro-hardness tester. A decrease in micro-hardness with increasing load, i.e. ISE, is observed in all the samples except microalloyed steel. The empirical relations, such as the Nix and Gao model, Minimum Resistance model, and Proportional Specimen Resistance (PSR) model, were used to determine the load-independent or true hardness values. Nix and Gao model was adopted to determine the plastically deformed zone (PDZ) size under the indenter and subsequently correlated with ISE in the materials. It is observed that ISE is absent when the PDZ size becomes comparable to or larger than the grain size of the material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai, India

Department of Materials Science and Engineering, Kyoto University, Kyoto, Japan

Institute for Materials Chemistry and Engineering, Kyushu University, Fukuoka, Japan

Department of Metallurgical & Materials Engineering, Indian Institute of Technology, Ropar, India

Department of Metallurgical & Materials Science Engineering, National Institute of Technology, Srinagar, India

AICTE-INAE Distinguished Visiting Professor, SRMIST, Chennai, India

References (30)

Show source-provided references
1. 10.1007/s11661-001-1010-010.1007/s11661-001-1010-0 ↗
2. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
3. 10.1016/j.msea.2017.01.03310.1016/j.msea.2017.01.033 ↗
4. 10.1016/0022-5096(94)90033-710.1016/0022-5096(94)90033-7 ↗
5. 10.1016/j.msea.2012.09.03710.1016/j.msea.2012.09.037 ↗
6. Blau PJ. · 1986
7. 10.1016/S0955-2219(99)00043-610.1016/S0955-2219(99)00043-6 ↗
8. 10.1016/S0022-5096(97)00086-010.1016/S0022-5096(97)00086-0 ↗
9. 10.1016/S0254-0584(02)00086-X10.1016/S0254-0584(02)00086-X ↗
10. 10.1016/S0955-2219(99)00043-610.1016/S0955-2219(99)00043-6 ↗
11. Golan G · Optoelectron Adv Mater · 2000 · 2 · 317
12. 10.3390/ma1418522010.3390/ma14185220 ↗
13. 10.3390/cryst1206079510.3390/cryst12060795 ↗
14. 10.1016/j.msea.2020.14064110.1016/j.msea.2020.140641 ↗
15. 10.1093/oso/9780198507765.001.000110.1093/oso/9780198507765.001.0001 ↗
16. 10.1179/09506605979042174610.1179/095066059790421746 ↗
17. 10.1016/j.matchar.2006.04.02310.1016/j.matchar.2006.04.023 ↗
18. 10.1016/0026-0800(73)90053-010.1016/0026-0800(73)90053-0 ↗
19. 10.1016/0921-5093(91)90753-A10.1016/0921-5093(91)90753-A ↗
20. 10.1557/JMR.1993.102810.1557/JMR.1993.1028 ↗
21. 10.1016/S0022-5096(98)00103-310.1016/S0022-5096(98)00103-3 ↗
22. 10.1016/S0022-5096(99)00075-710.1016/S0022-5096(99)00075-7 ↗
23. 10.1016/0956-7151(94)90502-910.1016/0956-7151(94)90502-9 ↗
24. 10.1016/j.scriptamat.2005.02.00910.1016/j.scriptamat.2005.02.009 ↗
25. 10.1016/j.actamat.2006.01.03610.1016/j.actamat.2006.01.036 ↗
26. 10.1016/j.actamat.2006.09.00410.1016/j.actamat.2006.09.004 ↗
27. 10.1016/j.actamat.2010.03.00410.1016/j.actamat.2010.03.004 ↗
28. 10.1016/S1003-6326(15)63958-910.1016/S1003-6326(15)63958-9 ↗
29. 10.1179/174328006X10247510.1179/174328006X102475 ↗
30. 10.1016/j.matlet.2021.13154410.1016/j.matlet.2021.131544 ↗